Woods 59008 60-Minuten-Digital-Countdown-Timer für den Wandeinbau, Weiß

Name: Woods 59008 60-Minuten-Digital-Countdown-Timer für den Wandeinbau, Weiß
Brand: Woods
SKU: 783961693381
Price: 36.79 EUR
Availability: InStock

Brand:Woods

3.5/5

€
36.79

PRODUKTBESCHREIBUNG Vom Hersteller Woods 59008 Decora Style; 60-30-20-10 Minuten voreingestellter Wandschalter-Timer; 60 Minuten Einfach einstellen und vergessen! Installieren Sie dieses Gerät anstelle vorhandener Wandschalter, um Ihr Leben einfacher zu gestalten. Es kann Badezimmerventilatoren automatisch ausschalten; Lichter und wenn es eine Steckdose steuert, sind Ihre Möglichkeiten endlos. Das Gerät verfügt über 5 Einstellungen: 10 Minuten; 20-Minuten; 30 Minuten; 60-Minuten und ab. Es passt problemlos auf Dekorschalterplatten (einzeln oder mehrfach) und ist mit Kompaktleuchtstofflampen kompatibel. Dieses Gerät ist für 120 Volt, 60 Hz und 15 Ampere ausgelegt. 1875Watt Widerstand 8AMP; 120Volt; 1000 Watt Wolfram 120 Volt; 8AMP; 1000-Volt-Vorschaltgerät; VOM HERSTELLER Woods 59008 Decora Style, 60–30–20–10 Minuten voreingestellter Wandschalter-Timer, 60 Minuten. Einfach einstellen und vergessen! Installieren Sie dieses Gerät anstelle vorhandener Wandschalter, um Ihr Leben einfacher zu gestalten. Es kann Badezimmerventilatoren und Lichter automatisch ausschalten und wenn es eine Steckdose steuert, sind Ihre Möglichkeiten endlos. Das Gerät verfügt über 5 Einstellungen: 10 Minuten, 20 Minuten, 30 Minuten, 60 Minuten und Aus. Es passt problemlos auf Dekorschalterplatten (einzeln oder mehrfach) und ist mit Kompaktleuchtstofflampen kompatibel. Dieses Gerät ist für 120 Volt, 60 Hz, 15 Ampere, 1875 Watt, ohmsches 8 Ampere, 120 Volt, 1000 Watt ausgelegt. Wolfram 120 Volt, 8 Ampere, 1000 Volt Vorschaltgerät.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 783961693381

Kategorien Werkzeuge & Heimwerken, Elektrik, Schalter & Dimmer, Wandschalter, Zeitschalter,

SPEZIFIKATIONEN DES WANDMONTAGE-COUNTDOWN-TIMERS: 120 V; 60Hz; 1/4 PS; 15A 1800W ohmsch; 83A 1000W Wolfram; 83A 1000VA Vorschaltgerät. CFL; LED; Kompatibel mit Glühbirnen: Der digitale Countdown-Timer ist mit den meisten Arten von Leuchten kompatibel, sodass Sie die Beleuchtung in Ihrem Haus oder Büro ganz einfach automatisieren können; Es passt auch zu jedem Einzel- oder Mehrfach-Dekorator oder jeder Standard-Schalterplatte. EIN-TOUCH-KOMFORT: Sie können die Zeit dieses digitalen Countdown-Timers für alle Geräte mühelos voreinstellen, indem Sie eine von 5 Einstellungen auswählen (AUS nach 10; 20; 30; oder 60 Minuten; oder AUS), um sich danach automatisch auszuschalten Ihre geplante Zeit. VIELSEITIGER IN-WAND-COUNTDOWN-TIMER: Dieser digitale Countdown-Timer eignet sich hervorragend zur Automatisierung der Deckenbeleuchtung. Deckenventilatoren; Verandabeleuchtung; Dachboden- oder Kellerbeleuchtung; Wasserkocher; Mobiltelefonladegeräte und andere Steckdosen, die über einen Schalter gesteuert werden. ENERGIESPARENDER DIGITALER COUNTDOWN-TIMER-SCHALTER: Der Wand-Countdown-Timer von Woods schaltet Ihre Geräte nach der programmierten Zeit automatisch aus, damit keine Energie verschwendet wird und die Sicherheit im Haus oder Büro erhöht wird.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Woods
Brand	‎Woods
Certification	‎ANSI C-74
Color	White
Color	‎White
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 459 ratings 4.4 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Human Interface Input	‎Buttons
Included Components	‎INWALL 60 MIN DIGITAL COUNTDOWN WHITE
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎59008
Item Package Quantity	‎1
Item Weight	‎5.6 ounces
Manufacturer	‎Woods
Material	Blend
Material	‎Blend
Mounting Type	‎Panel Mount
Number of settings	5
Number of settings	‎5
Part Number	‎078693590085-WOO
Product Dimensions	3"D x 6"W x 2.25"H
Product Dimensions	‎3"D x 6"W x 2.25"H
Product Dimensions	‎6 x 3 x 2.25 inches
Size	‎60-Minute
Style	‎60-Minute
Switch Style	‎DIP Switch
Switch Type	‎2-way

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: maztek

For my bathroom heater/fan/light combo.

Ok, had to replace the first one after a few years. But it's one of a few UL rated for the heater amperage i need. I'll consider this a necessary evil cos it's inexpensive and has the time intervals i want

Scritto da: UncMike

Last one lasted 7 years

These have been most reliable. Naturally a bit bulky and only fits a deep box. Hope to get at least 7 years of this one, too. Hate that it's made in China but hopefully Woods will get the hint and shift production to Mexico like many other makers of electronic devices.

Scritto da: Myron J Guy

easy to install

intended purpose, timer switch.

Scritto da: Mark

THIS REQUIRES A SEPARATE NEUTRAL IN THE BOX

Works well after I ran a neutral to the switch box. I also had to add an extension on the box to accommodate four wire nuts. a mechanical timer would have been a better fit for me. Good for new installations not for existing boxes.

Scritto da: swt

Fairly complex install

It took a little time to get this installed as I needed to "make" a neutral connection by pigtailing a white wire to have a neutral for the installation.Then the ground was also required to have a wire pigtailed onto it. And 3rdly there was an extra black wire. I assumed that the two that were attached to the same side of the existing switch were meant to be together so, I piggtailed a single back wire to them. When hooking up the timer I guessed wrong initially as to which black wire was hot. But switched them around and all went well. Finally my bathroom doesn't run 20 hrs a day!

Scritto da: Picky

Timer Works and Lights Indicate When On or Off

I have a fan with light unit on a porch ceiling, controlled by two switches for the fan and light. When I would forget to turn off the light, I could see that at night, but not so for the fan. I bought the timer so that the fan will turn off on its own. I bought the timer a few months ago but only recently had it installed, so I can't judge its durability. It seems solid and it functions as it is supposed to. I like the ability to select different operating times, although I don't like having to push the switch at the bottom of the unit to cycle through the time options to get to the one I want. Pressing the bottom switch once turns on the light at the top for the shortest time (10 minutes on this unit). Pressing it again turns on the second light from the top (20 minutes). Again for the third light (30 minutes), again for the fourth light (60 minutes), and again to turn off. I would have preferred that each light was actually a separate switch to press the desired time directly. (Less wear on the bottom switch and less pressing.) Regardless, it works. I like that the "Off" position (fifth light from the top, directly above the switch) is red and can be seen at night to confirm from a distance that the fan is off. By the way, there are different models of this unit that have different timing intervals. I could have chosen one with longer intervals than 10 minutes.

Scritto da: Bob H

If I Had It To Do Over Again...

... I would have purchased the Leviton LTB60-1LZ instead... [..] Why? Because, as other reviewers have said, this unit, though it appears to operate as advertised, DOES NOT PROPERLY FIT A DECORA WALLPLATE! Why? Because it is improperly designed and manufactured. The plastic face of this device, in which the LEDs and the single push-button are mounted, simply does not extend far enough beyond the metal ears of the mounting bracket, hence the device will not properly extend through a Decora wallplate. Having worked with electricity all my life (yes, I work in the field), I was able to very, very carefully bend the upper and lower brackets back a bit, then vertical again -- a sort of "Z" shape -- so as to cause the device to protrude forward a bit further, but I wouldn't recommend this method for the casual weekend installer. It's far too easy to break a bracket and too difficult to do what I did in a way that provides a satisfactory result. (Even I'm not COMPLETELY satisfied, but it IS an improvement that should never have been necessary for me to attempt.) Can you simply shim the entire device forward with washers, plastic shims, etc., as other reviewers have done? Well sure, but that's what one should always be prepared to do (usually necessary if the switchbox is recessed a bit such that the face of the box is not flush with the wall surface; search Amazon or Home Depot for these: "Gardner Bender #GSP-04 Electric Device Spacer") Unfortunately, that for resolving the "switchbox is recessed" problem, but even when it is not, the face of the Woods 59008 is still a bit recessed from where it really should be, and that looks ugly and incomplete, like you really didn't care enough to do the job right in the first place. To be clear, shimming the timer forward does NOT fully resolve the problem! It STILL looks like it's improperly mounted and, if you take pride in your work and how it looks when you're done, you will -- like me -- find yourself wishing you'd spent the extra money and purchased the Leviton instead. Why did I go with the Woods device? One reason -- it was considerably cheaper; I figured I'd save a few bucks. What a mistake that was! Why didn't I send it back to Amazon if I was this dissatisfied? Time constraints. It was going into a rental house and I couldn't afford the time or trouble of ordering the Leviton device and making another special trip to the property just for that. Since my "Z-bending trick" pretty well resolved the issue for me, and I didn't have the time-luxury of shipping this one back and waiting for a replacement, I forged ahead anyway. Will I ever order another one? Not on your life! I've got the more-expensive Leviton device in my own home and I absolutely love it from an ease-of-installation perspective, from an operational perspective and, quite frankly, I think it actually looks better, as well. Not to mention that with the Leviton, you push the button you want -- 10, 20, 30 or 60 -- ONCE, whereas with the Woods device, you have to push the single button that's provided multiple times if you want anything other than "10". That doesn't sound like much, but when added to the rest, it's just one more annoyance I'd prefer not to have. If saving $10 or $12 bucks is important to you -- and I understand that it may well be -- then go ahead and buy this one. But if you really want to "do it right" and have a device that installs easily and PROPERLY the first time -- without unnecessary aggravation -- do yourself a favor and pass on this device in favor of something better. And you know which one I recommend...

Scritto da: Fish-N-Hunt

Easy replace

This was a replacement for one that only lasted 15 years. Let’s hope this one makes it 20. It works fine and you can just run your fan for a while and forget it.