WEN DW1085 10-A-Hand-Trockenbauschleifer mit variabler Geschwindigkeit, Staubschlauch und Auffangbeutel, Schwarz, verbesserte Staublochkonfiguration

Name: WEN DW1085 10-A-Hand-Trockenbauschleifer mit variabler Geschwindigkeit, Staubschlauch und Auffangbeutel, Schwarz, verbesserte Staublochkonfiguration
Brand: WEN
SKU: 0044459910855
Price: 188.13 EUR
Availability: InStock

Brand:WEN

3.3/5

€
188.13

Erinnern Sie sich noch daran, als Sie die glatteste Trockenbauwand der Stadt hatten? Der tragbare Trockenbauschleifer WEN mit variabler Geschwindigkeit macht das Schleifen von Trockenbauwänden einfacher als je zuvor. Mit einem leichten 6-Pfund-Gehäuse erledigen Sie selbst die schwierigsten Aufgaben schnell. Wenn das nicht leicht genug ist, verhindern der mitgelieferte Schultergurt und der Zusatzgriff Ermüdungserscheinungen an langen Arbeitstagen. Befestigen Sie den Griff sowohl für Links- als auch für Rechtshänder an beiden Seiten des Schleifers oder lassen Sie ihn ganz weg, um ihn in enge Räume und Ecken zu passen. Der feststellbare Netzschalter sorgt dafür, dass Ihr Schleifer auch nach dem Loslassen des Auslösers weiterschleift. Passen Sie die Geschwindigkeit unseres leistungsstarken 10-Ampere-Motors zwischen 1500 und 2300 U/min an, um den Anforderungen des jeweiligen Projekts gerecht zu werden. Das 8,5-Zoll-Klettverschluss-Basispad macht den Schleifpapierwechsel zum Kinderspiel. Kontrollieren Sie überschüssigen Staub mit dem Staubabsaugrad mit variablem Luftstrom. Der 7,5 Fuß lange, flexible Staubsammelschlauch lässt sich problemlos entweder am mitgelieferten Staubbeutel oder am Staubsammelsystem Ihrer Wahl befestigen und bietet mit einem 1-7/8-Zoll- und einem 2-1/4-Zoll-Staubadapter maximale Vielseitigkeit. Dieses Paket enthält außerdem acht Stück Klett-Schleifpapierscheiben (zwei Stücke mit 150er Körnung, zwei Stücke mit 180er Körnung, zwei Stücke mit 240er Körnung und zwei Stücke mit 400er Körnung). Durch die verbesserte Lochkonfiguration werden die Schleifpapierlöcher direkt unter dem mitgelieferten Staubschlauch platziert, wodurch die Staubsammlung maximiert und der Reinigungsaufwand minimiert wird. HINWEIS: Nur kompatibel mit den Ersatzschleifpapiermodellen DW60SP, DW80SP, DW120SP, DW150SP, DW240SP und DW400SP. Und da es sich um ein WEN-Produkt handelt, erhalten Sie für Ihren Trockenbauschleifer mit variabler Geschwindigkeit eine zweijährige Garantie, einen Lagerbestand an Ersatzteilen und eine freundliche Kunden-Hotline. Erinnern Sie sich noch an die Zeit, als Sie Trockenbauwände problemlos schleifen konnten? Erinnere dich an WEN.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0044459910855

Kategorien Werkzeuge & Heimwerken, Elektro- & Handwerkzeuge, Elektrowerkzeuge, Schleifer, Tellerschleifer,

Verfügt über einen 7,5 Fuß langen Staubschlauch, acht 9-Zoll-Schleifscheiben mit verschiedenen Körnungen, einen Schultergurt, einen Staubsammelbeutel und eine zweijährige Garantie. Das Basispolster mit Klettverschluss macht den Schleifpapierwechsel einfacher als je zuvor. Die verbesserte Lochkonfiguration maximiert die Staubsammlung bei minimalem Reinigungsaufwand (HINWEIS: Nur kompatibel mit Ersatzschleifpapier der DW-Serie, d. h. DW120SP). Der 10-Ampere-Motor mit variabler Drehzahl arbeitet überall zwischen 1500 und 2300 U/min. Umkehrbarer Zusatzgriff, perfekt für Links- und Rechtshänder.

Amperage Capacity	10 Amps
Amperage Capacity	‎10 Amps
Batteries Required?	‎No
Brand	WEN
Brand	‎WEN
Color	‎Black
Country of Origin	‎China
Customer Reviews	4.2 4.2 out of 5 stars 376 ratings 4.2 out of 5 stars
Grit Number	80
Grit Number	‎80
Grit Type	Medium
Grit Type	‎Medium
Included Components	‎10-Amp Variable Speed Handheld Drywall Sander with Dust Hose and Collection Bag
Item model number	‎DW1085
Item Package Quantity	‎1
Item Weight	‎9.68 pounds
Manufacturer	‎WEN
Maximum Rotational Speed	‎2300 RPM
Package Dimensions	‎15.2 x 13.5 x 11.5 inches
Part Number	‎DW1085
Power Source	Corded Electric
Power Source	‎Corded Electric
Style	‎Improved Dust Hole Configuration

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Fly high

Great to use minus the minor shocking

Great tool to get the job done does shock you a little bit but it's not bad definitely worth the money and it collects alot of the dust and limits the hand sanding

Scritto da: Christopher Plotz

Lets Get Down To It

I went through a ton of the reviews. As always I go through the 1 star reviews and read most of them. Some of the main complaints were a wobble, bad suction, no adapter for shop-vac, and a shocking sensation when using the tool. First and foremost I love this tool. You can not beat the price. So lets get to it. 1. The wobble. A wobble doesn't mean the manufacturer screwed up or its a bad product. It could have been damaged in transit. Always make sure to check your orders the minute they come in for any defects and return to Amazon for free should there be any issues for a refund or replacement. If you get another one with a similar issue reach out to Amazon or the delivery party and file a complaint. Amazon in not in the habit of sending out junk so its more then likely the shipper screwing up you product not Amazon or the manufacturer. 2. Bad suction. If there is bad suction its the vacuums fault not necessarily the tool or the size grit you're using is to high or the drywall is still damp. Make sure you're using a good sized shop-vac with the appropriate dust collection bag for the vacuum. If you are not doing this that is more than likely your problem. 3. No adapter for shop-vac. There are adapters out there but you have to look for them. I found a Ridgid VT1755 3 piece adapter set at home depot and you can make them work with the tools hose and your vacuum with little effort and especially without glue or duck tape. The fit is tight which is a good thing. Finally the shock issue. The shock issue happens for several reasons. One your vacuum has no ground prong on the cord, the circuit your are plugged into has no ground or simply there is a ton of static being caused by the conditions locally and the fact that you are using primarily plastics in your vacuum and tool. I had a few shocks at first but then changed my vacuum and it went away as well as the weather conditions were different and the electrical was better at the next job. If need be wear rubber coated gloves and move on. This is a great product. Sure it can be improved upon but what can't.

Scritto da: jeremy rood

Bought for finishing basement

I bought this sander to help me finish the drywall in my basement, I'm not a professional drywaller so I had a lot of sanding to do. 1. For the price its a very nice tool and comes with some some good accessories. 2. It doesn't get into the corners very well as others have stated. 3. It will shock the crap out of you while using if your have plastic hoses and bare hands. 4. It will eat right through your mud if you're not careful, even on the lowest setting. 5. Using it on the ceiling is possible, but it gets heavy very quickly. I could only sand ceiling for a few minutes at a time. 6. A good shop vac with a secondary centrifugal separator is what I used to control dust. Without the separator the vac filter plugged within minutes. 7. It will drop some dust when you stop using it, even with the vac running. Not a big mess, but annoying. I'm glad I bought this tool, it really helped me get good results in my basement. It took a little bit to get good with it, but I'm glad I spent the money on it.

Scritto da: Taylor and Colt’s Mommy

DIY project? Buy it!!

It’s a good product! Would this be for a contractor to use every day on the job? Doubtful. I think this tool is more for the busy DIY homeowner. That’s me! Used it for my basement and kitchen/dining walls and so far, this is the investment that keeps on giving!!! I started sanding down in my basement with hand sanders. Time consuming! Got this baby, finished my basement and then went up and did the sand, patch/repair, and re-sand for my entire kitchen/dining area in 4 hours!! The longest part was waiting for the mud to dry...seriously. The walls were really bad (numerous drip marks, showing joints, nicks/dings, and just overall really bad previous paint job). The walls are so smooth now and I can’t wait to paint! Obviously not good for edges/corners, which were also very bad. I have a different sander for that. Really glad I decided to just “buy it and figure out how to use it”. It’s very easy. I had never used a power sander before and was worried about doing more harm than good. There was nothing to worry about. Just keep your hands all the way on the handle/ grip when you’re using it. I have a habit of holding up my pinky away from the rest of my hand when I grab things and I felt the electric shock a few times that others spoke about. Either that or do what one guy said and just get some rubber gloves. I’m an electrician so the little shock didn’t scare me at all, but I still grabbed some gloves just to make sure I wasn’t distracted while sanding.

Scritto da: Mike K.

It's a shocking good sander

It's definitely has a issue with static shock or insulation in the trigger assembly. I hooked it up to a shopVac 6hp and I have zero dust. It's a beast it chews drywall mud in a milli second but I've had for short time so hopefully I will get better with it. I would say probably best to get a thicker vinyl glove to wear while using.

Scritto da: MarsFire

Good tool. Use a shop vac.

A common problem with drywall sanders is that the pads have holes in different spots (so you use that brands sanding discs). I experimented with a sanding disk which did not fit the holes, and hooked the tool up to a shop vac. It worked really well. Yes, some extra dust- but expected with a tool which is designed to create dust.

Scritto da: jonathan henry

Decent but issues....

This machine was halfway decent, but it's a bit in the heavy side. I've stopped using the sander though due to continuous shocks I get from it. I believe money would have been better spent going towards a higher quality machine.

Scritto da: Kersten

Works well

I should have bought years ago. You will catch on quickly how to use….for instance, don’t flip over unless you have a garbage can near by. The tool will collect dust if you are working overhead and will drop everywhere if not careful. But if you extract this build up into a garbage can or vacuum it out of the unit. It is true this machine will create no mess on it’s own

Scritto da: Bookish

Broke after 1 use.

The machine seems like really good quality and it worked well but the lock-on power switch broke after one use which makes it harder, if not impossible, to use.

Scritto da: Jonoblo

Amazing machine

Only problem for me it give you a lot of static One you’re wearing the proper gloves you’ll be ok