Trend 12-teiliges Fräser-Bit-Starter-Set, 1/4-Zoll-Schaft, Wolframkarbidspitze, inklusive Aufbewahrungskoffer, SET/SS8X1/4TC 12-teiliges Set

Name: Trend 12-teiliges Fräser-Bit-Starter-Set, 1/4-Zoll-Schaft, Wolframkarbidspitze, inklusive Aufbewahrungskoffer, SET/SS8X1/4TC 12-teiliges Set
Brand: Trend Enterprises
SKU: 5027654033951
Price: 67.16 EUR
Availability: InStock

Brand:Trend Enterprises

3.6/5

€
67.16

Das Trend SET/SS8X1/4TC ist das perfekte Oberfräsen-Starterset als Einstieg in das Fräsen bei Verwendung einer Oberfräse mit 1/4-Zoll-Schaft wie der Trend T5. Das Set besteht aus 12 Fräsern und deckt häufig verwendete Profile zum Kanten-, Nut-, Falz-, Besäum- und Zierarbeiten ab. Im robusten Koffer sind alle Oberfräsen-Schneidwerkzeuge sicher, organisiert und jederzeit einsatzbereit. Enthält: 1 x gerader 6,3 mm Durchmesser x 16 mm Schnitt, 1 x gerader 12,7 mm Durchmesser x 19 mm Schnitt, 1 x Schwalbenschwanz 104 Grad x 12,7 mm Durchmesser2 x Geführter runder Überradius 6,35 mm und 9,5 mm, 1 x geführte Fase 45 Grad, 1 x geführter Falzfräser, 9,5 mm Falz, 1 x geführter Trimmerdurchmesser 12,7 mm, 1 x geführter Hohlkehlenradius 6,3 mm, 1 x V-Nut 45 Grad, 1 x Kernkastenradius 6,351 x geführter Ogee-Radius 4 mm

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 5027654033951

Kategorien Elektro- & Handwerkzeuge, Elektrowerkzeugteile & Zubehör, Routerteile & Zubehör, Router Bits, Gerade, Spiral- & Zierleisten-Bits, Gerade,

SCHÜTZENDER AUFBEWAHRUNGSKOFFER: Das Set wird in einem Kunststoff-Aufbewahrungskoffer mit Identifikationsindikatoren für eine schnelle Profilerkennung geliefert und ist eine tolle Ergänzung für Ihr Oberfräsen-Werkzeugset. LAGERENDE UND NICHTLAGERENDE SCHNEIDER: Das Set umfasst lagergeführte Fräser für Kantenprofilierungsarbeiten und nichttragende Fräser für den Einsatz mit Zäunen, Führungsbuchsen, Schablonen und Linealen. HALTBARKEIT VON WOLFRAMCARBID: Jeder Fräser verfügt über solide Wolframcarbid-Schneidkanten für erhöhte Leistung und Haltbarkeit bei Massivholz- und Plattenmaterialien, Lagen und MDF. UNIVERSAL 1/4 ZOLL SCHAFT: Mit einem Schaftdurchmesser von 1/4 Zoll sind diese Fräser mit den meisten Oberfräsenmodellen kompatibel. Ein ideales Starterset für Oberfräsen mit 1/4-Zoll-Schaft. VIELSEITIGE Fräserauswahl: Dieses 12-teilige Fräser-Fräser-Set bietet beliebte TCT-Bits für dekorative und konstruktive Holzarbeiten, von feinen Möbeln bis hin zu kleinen Schreinereiarbeiten.

Batteries Included?	‎No
Batteries Required?	‎No
Brand	Trend Enterprises
Color	‎Black/White
Country of Origin	‎China
Customer Reviews	4.6 4.6 out of 5 stars 1,657 ratings 4.6 out of 5 stars
Included Components	‎1x SET/SS8X1/4TC
Is Discontinued By Manufacturer	‎No
Item model number	‎SET/SS8X1/4TC
Item Package Quantity	‎1
Item Weight	‎1.25 pounds
Manufacturer	‎Trend
Material	Tungsten Carbide
Material	‎Tungsten Carbide
Measurement System	‎Metric
Number Of Pieces	‎1
Part Number	‎SET/SS8X1/4TC
Power Source	‎Hand Powered
Product Dimensions	‎7.28 x 9.13 x 2.05 inches
Size	12 Piece Set
Size	‎12 Piece Set

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: mike kass

Good value

I was reluctant to buy these router bits. But I didn’t want to spend $200+ on the cmt bits. I saw a review on you tube and the guy had decent things to say about the trend bits. I have test four how them on pine. No burning good smooth cut. I did have one bit slide In the Collett. Not a big issue. For the money you can’t go wrong

Scritto da: James W Smetana

Broke the first time using

I purchased this set on Nov. 30, 2019. Today, Nov. 29, 2020 I had a project that required using the 1/4" Straight bit. I drilled a hole in the plywood since I do not have a plunge router base for my Porter Cable 890 router. The first circular pass went well. I was routing less than 1/4" into 3/4" plywood. Upon lowering the bit I proceeded to route a second pass, again this time less than 3/16" in depth. The bit lasted at best 5 inches before it broke off inside the collet. Needless to say, I waited far too long to even attempt to use these bits to ask for a return/refund. I will attempt to contact the supplier to see if they will stand behind their product. Not holding my breath. Update:Dec.8,2020. I received an email today from Trend stating that a replacement bit is being sent. They do stand behind their product.!!

Scritto da: O. AL BUGEAEY

Nice bits

Nice set.. I need a project to test them out..

Scritto da: Amazon Customer

Cheap

I ordered another set thinking the first one that showed up just like this was just a fluke but this is the second set that I've received it looked just like this. Buyer beware

Scritto da: Aleksandr Serstjuk

good quality for good price

good quality for good price

Scritto da: Stephen2k1

Disappointed Trend quality control (dangerous)

The media could not be loaded. Diy'er who buys for quality over price. Trend TCT 24pc router starter set. The router bit I had been waiting for in the set arrived with bent shaft. Had I not inspected it first, used in router, it would have been very dangerous at the high speed a router works at. It would no doubt throw the router all over the place as well as destroy the workpiece. Shame on Trend. Would not expect this even from a cheep router set. However, Amazon sending replacement set without quibble, top marks, so here's hoping it's a one off from Trend. The rest of the router bits seem very sharp, well made and good storage case.

Scritto da: Paul Howarth

Good price

These do fine for the sort of work I do, find they go dull fairly quick. If I wanted absolute precision I would buy a better quality product.

Scritto da: costache mihai

Good product, just the box damaged

Good product but the box's glass is not very strong and actually came broken.

Scritto da: P.F

Value for money

Arrived with the very fragile see through panel completely broken and all the bits loose. Used the 1/2” 6.3mm bit to test a new Makita router and it snapped in 3 seconds! Tried a couple of other bits and they seemed ok. Returned for a refund. Purchased the 35 piece 1/2” set as it works out very good value. A little nervous about the strength of the thinner bits.