SP Ableware Cane Valet Stockhalter (703240050)

Name: SP Ableware Cane Valet Stockhalter (703240050)
Brand: SP Ableware
SKU: 0742645010715
Price: 38.97 EUR
Availability: InStock

Brand:SP Ableware

1.5/5

€
38.97

Dieser Stockhalter wird zum Aufhängen oder Festklemmen eines Stocks verwendet und ist ein kleiner Kunststoffbeschlag, der am Stock befestigt wird, um ihn bei Nichtgebrauch an einer Tischkante zu halten. Der Halter rastet am Stock ein und gleitet nach oben oder unten, um die Ober- oder Unterseite des Tisches zu berühren. Er ist vielseitig einsetzbar und kann paarweise verwendet werden, um sowohl die Tischoberseite als auch die Tischunterseite zu berühren. Um einen besseren Halt am Stockschaft zu gewährleisten, kann ein kleines Gummiband um die Endhaken gelegt werden. Der Halter misst 8,5 x 4,0 x 1,0 Zoll (L x B x H). (L ist die Länge, der horizontale Abstand von links nach rechts; W ist die Breite, der horizontale Abstand von vorne nach hinten; H ist die Höhe, der vertikale Abstand vom niedrigsten zum höchsten Punkt.) Ableware ist auf Produkte für die häusliche Gesundheitsfürsorge und Rehabilitation spezialisiert Senioren-, Behinderten- und Reha-Märkte. Wir wurden als größter Hersteller von Hilfsmitteln für das tägliche Leben (ADL) in den Vereinigten Staaten anerkannt. Ableware entwickelt und fertigt weiterhin Produkte, die die Mobilität erhöhen, die Unabhängigkeit maximieren und den Menschen ein lohnenderes, würdigeres und bereicherteres Leben ermöglichen.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0742645010715

Kategorien Medizinischer Bedarf & Ausrüstung, Mobilitäts- & Alltagshilfen, Mobilitätshilfen & -geräte, Rollstühle, Krücken & Zubehör, Gehstockzubehör, Blechhalter,

Vielseitig einsetzbar für den paarweisen Einsatz zur Kontaktierung sowohl der Tischober- als auch der Tischunterseite. Lässt sich am Rohrstock einrasten und nach oben oder unten schieben, um die Ober- oder Unterseite des Tisches zu berühren. Kleiner Kunststoffbeschlag zur Montage am Gehstock, um ihn bei Nichtgebrauch an der Tischkante zu halten. Um einen besseren Halt am Stockschaft zu gewährleisten, kann ein kleines Gummiband um die Endhaken gelegt werden. Halter zum Aufhängen oder Einklemmen eines Stockes.

Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item model number	703240050
Manufacturer	MADJI
Product Dimensions	2 x 2 x 0.75 inches; 0.8 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: D.J.

Spend Most Of Your Time Worrying About It Falling

'Barely' worked. Surprisingly (to me anyway), every table/desk I tested this on had a beveled edge. This product does not do well with beveled edges because this product has to reach so far to get past the beveled part to get to the actual 'top' of the table that only a very small part of this product is actually touching the top of the table. So this makes the cane swing very far under the table, which means the cane is at about a 45 degree angle, which means that this product is at about a 45 degree angle and therefore VERY close to slipping off the table. My dad and I had to place it absolutely perfectly on the table so there would be no swinging at all when we let go, otherwise it would slide off. And even when it didn't slide off, it sure acted like it was ready to slide off at any minute. The material wasn't a grippy, rubber type material like would be expected either. It was actually fairly smooth (which increases slipperiness). This was very surprising. There were two of these slats included in the package and they suggested trying one slat above the table and one below, that was supposed to hold it a bit tighter by kind of gripping the table. Well two problems with that... 1) Different tables have different thicknesses so you'd have to adjust one of the slats when you sit at different tables, and 2) When I tried this, it didn't help. If the slats were a bit longer, or they put rubber grippers under the slats, or it was made out of a rubber-like material, it'd probably work better. But my experience was that my dad would spend more time worrying about it falling on the floor than he would spend finding a place to prop his cane up in the first place. Can not recommend it.

Scritto da: DK

There are two in the package.

I bought two because the description says "The holder" (singular) and the reviews say you need a pair. There are two in the package so now I am stuck with an extra pair. I will update the review after I see how they work.

Scritto da: BettyL

Tabling your Cane

This product works fairly well; however, you really need TWO! You leave space between the two--as shown on the product page; this clamps between the top and bottom layer of a table & is adjustable as to thickness.

Scritto da: Carl Franklin, JD/PhD

Good for those who use a cane or walking stick.

Works just like the advertisement. I tried using a single rubber piece, and it worked okay most of the time. With two in place you get a lot better grip. I also use an aluminum walking stick that I purchased years ago when I would go hiking a lot. This piece has actually been very helpful for me on a hiking trail. I can put the walking stick on a nearby tree branch of other "flat" surface to keep from laying my instrument on the ground.

Scritto da: Brumby Mcgehee

Doesn't work

One half of it will often hold a cane on a counter if the flat side of it is down.

Scritto da: Steven Fuller

This is a terrible product it fell of the cane with in the ...

This is a terrible product it fell of the cane with in the first hour of use and was lost due to breaking

Scritto da: Bernie Saunders

The Cane Valet/Cane holder is a great thing. When you slide it on to the ...

The Cane Valet/Cane holder is a great thing. When you slide it on to the table it stay there or at a counter it will stay there, etc. Thank you.

Scritto da: AlliFlowers

Does not work

Does not work. Too short to put around a table and actually hold the cane immobile.