Red Lion 305584008 Überholungssatz für RJS-100-PREM 1 HP Flachbrunnenstrahlpumpe, Natur 1 HP Überholungssatz

Name: Red Lion 305584008 Überholungssatz für RJS-100-PREM 1 HP Flachbrunnenstrahlpumpe, Natur 1 HP Überholungssatz
Brand: Red Lion
SKU: 0010121147133
Price: 59.99 EUR
Availability: InStock

Brand:Red Lion

3.4/5

€
59.99

Anweisungen zur Installation finden Sie im Installationshandbuch der Pumpe. SIEHE BILD DER TEILELISTE im BENUTZERHANDBUCH: Enthält die Elemente 3, 4, 5, 6, 7 und 8. ENTHÄLT: O-Ring, Gleitringdichtungssatz (2 Teile), Laufrad, Spirale, Düse, Venturi. REPARATURSATZ: speziell für die Flachbrunnenstrahlpumpe Red Lion RJS-100-PREM 1 HP entwickelt; Für andere Strahlpumpen nicht empfohlen, da die Leistung beeinträchtigt werden kann. ÜBERHOLUNGSSATZ: enthält die am häufigsten austauschbaren Komponenten für die 1-PS-Flachbrunnenstrahlpumpe RJS-100-PREM.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0010121147133

Kategorien Werkzeuge & Heimwerken, Grobinstallation, Wasserpumpen, Teile & Zubehör, Pumpenzubehör,

Brand	Red Lion
Color	Natural
Item Dimensions LxWxH	2.25 x 8 x 12.25 inches
Material	Stainless Steel, Glass-filled Thermoplastic, Carbon/Ceramic, Rubber
Style	1 HP Overhaul Kit

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Evergreen Ubergeek

Looked good, but had to return because another item was returned

Sent back because the other item that would have required this was also returned.

Scritto da: Jerome Adams

KIT worked as expected

works great

Scritto da: Lainey

Great repair!

Worked as expected. Great to have a Pump that's is repairable. So a big Thank you to Red Lion. Because this was a brand new pump that had run dry. Felt good to be able to repair it without buying a new one. I will be buying more red lion pumps. Repair took only about half hour. Be patient when separating the motor from pump head. I use a hammer and block of wood to slowly tap around the pump head off after removing the four bolts holding it on. I removed the venturi with the hex on a spark plug socket and a pair of channel lock pliers. Easy job for anyone. My pump went from being unable pump even 1 psi to like new again. One more tip. Always replace the pressure switch with low pressure shut-off switch by square D. I always do except for this one and I regretted it of course. Those switches will save your pump should your well or tank go dry or a line break that causes your pump to lose water pressure.

Scritto da: Gary H

My old one was bad so I had to go to the hardware store ...

These are all the parts you need to overhaul your pump with the exception of the O-ring that goes between the venture and diffuser. Not sure why they don't include it. My old one was bad so I had to go to the hardware store to buy a replacement before assembling. My original nozzle had a hole size of 7/32" and the new nozzle was 1/4" so I'm not sure if there was a design change, maybe the replacement or original is the wrong size. I'll find out when I start it up. Other than that the kit is complete and look identical to the original.

Scritto da: Still Kicking

Easy Rebuild

Everything I needed to rebuild the pump was in the kit. If you need instructions you may be out of luck as none are included. This kit was used to rebuild a pump that failed due to low water conditions. The parts all fit perfectly, the price was fair. This is a pretty easy rebuild if you have even the most basic mechanical abilities.

Scritto da: Amazon Customer

Simple

After figuring out how to split the pump the insulation was very easy and operation was quiet and good

Scritto da: Twyla Quinn

It did not work on my pump. It's the wrong kit for my Red Lion RJSE 1/2 hp Type B pump.

It did not work on my Red Lion RJSE -50 Type B pump 1/2 hp. I called the company and they said I need the 640160 Kit to work on my pump not the 305584006 kit.

Scritto da: Wayne A Leaman

As described

As described