Rain Bird 12DSH Doppelsprühdüse, 180°-Halbkreismuster, 9' - 12' Sprühabstand Halbkreis, 180°-Muster, 180°-Halbkreis

Brand:Rain Bird

3.7/5

20.62

PRODUKTBESCHREIBUNG Rain Bird 12DSH Dual Spray 180°-Halbkreismuster-Düse mit angepasster Niederschlagsmenge, einstellbarer Sprühabstand von 9' bis 12', 23° Flugbahn. Diese Spezialdüse verfügt über zwei Sprühöffnungen für eine verbesserte Nahbewässerung und eine gleichmäßigere Wasserverteilung. Das einzigartige, patentierte Unterschnittdesign verkürzt die Bewässerungszeiten, verbraucht 30 % weniger Wasser und reduziert die Wasserverschwendung bei windigen Bedingungen. Bereiche in der Nähe des Kopfes werden gleichmäßig abgedeckt, wodurch trockene braune Flecken minimiert werden. Korrosionsfreie Kunststoff- und Edelstahlkonstruktion für lange Lebensdauer. Die Einstellschraube aus Edelstahl passt die Durchflussrate von 1,8 bis 2,6 Gallonen pro Minute und den Sprühabstand von 9' bis 12' an. Der gesicherte Schraubenschlitz verhindert ein Abrutschen des Schraubendrehers während der Einstellung. Die Düse sprüht ein 180°-Halbkreismuster mit einer Flugbahn von 23° und passt auf alle Sprinkler und Strauchadapter von Rain Bird. Das feinmaschige Filtersieb sorgt für eine präzise Radiuseinstellung und schützt die Bodenöffnung vor Schmutz. Die seit Jahrzehnten bewährten MPR-Düsen von Rain Bird verfügen über eine Wasserverteilungstechnologie mit angepasster Niederschlagsrate. Düsen mit unterschiedlichen Bögen und Radien können unabhängig von der Sprüheinstellung in derselben Zone gemischt werden und sorgen dennoch für eine gleichmäßige Wasserverteilung. Es steht eine große Auswahl an MPR-Düsen zur Verfügung, sodass die Wasserverteilung an die einzigartigen und vielfältigen Anforderungen Ihrer Landschaft angepasst werden kann. MPR-Düsen sind so konzipiert, dass sie eine gleichmäßige Abdeckung bieten und sicherstellen, dass Ihr Rasen durchgehend grün ist und keine trockenen oder braunen Stellen aufweist. Weitere erhältliche Dual Spray MPR-Düsen (separat erhältlich) sind: 360°-Vollmuster (12DSF) und 90°-Viertelmuster (12DSQ). Rain Bird „Die intelligente Nutzung von Wasser VOM HERSTELLER Rain Bird Corporation ist ein Privatunternehmen, das 1933 während des Agrarbooms in Kalifornien gegründet wurde. Wir gelten als weltweit führender Hersteller und Anbieter von Bewässerungsprodukten und -dienstleistungen. Mit Vertriebsbüros rund um den Globus; Wir bieten über 4.000 wassersparende Bewässerungsprodukte in mehr als 130 Ländern an. Von Anfang an hat Rain Bird das branchenweit umfassendste Sortiment an hochwertigen Bewässerungsprodukten für Bauernhöfe, Golfplätze, Sportarenen, Gewerbebauten und Häuser produziert und angeboten. In den letzten 80 Jahren hat Rain Bird weltweit mehr als 450 Patente erhalten. Einschließlich der ersten für die Bewässerung im Jahr 1935 auf unserem ursprünglichen Sprinkler mit Schlagantrieb (US-Patent Nr. 1.997.901), der die landwirtschaftliche Nahrungsmittelproduktion revolutionierte und weltweit eine neue Ära der Bewässerung einleitete. Im Jahr 1990 wurde dieser ursprüngliche Prallsprinkler von der American Society of Agricultural Engineers zum historischen Wahrzeichen erklärt. Unsere Produkte decken alle Aspekte der Bewässerung ab: Zeitschaltuhren/Steuerungen, versenkbare Rotationssprinkler, versenkbare Sprühkopfsprinkler, Sprinklerdüsen, Bewässerungsventile, Tropfbewässerung, Entwässerung und vieles mehr. Diese Produkte wurden weltweit in den größten und prestigeträchtigsten Projekten zur Bewässerung von Wohn-, Gewerbe-, Landwirtschafts- und Golfplatzanlagen ausgewählt und installiert. Rain Bird engagiert sich für die intelligente Nutzung von Wasser™ und erstreckt sich über die Produkte hinaus auf Bildung, Schulung und Dienstleistungen für die Industrie und die Gemeinschaft. Unser Vermächtnis besteht darin, nur Produkte von höchstem Wert und höchster Qualität zu entwerfen und herzustellen. Wir sind dankbar, dass wir von vielen unserer geschätzten Partner zahlreiche Anerkennungspreise erhalten haben. Rain Bird „Der intelligente Umgang mit Wasser

Hergestellt aus äußerst haltbaren UV- und chemikalienbeständigen Materialien, um eine lange Lebensdauer zu gewährleisten. Die Einstellschraube aus Edelstahl passt die Durchflussmenge und den Sprühabstand an. Beseitigt trockene braune Flecken in der Nähe des Kopfes. Kompatibel mit allen Rain Bird Versenkregnern. 180°-Halbkreismuster mit einstellbarem Sprühabstand von 9' bis 12'. Verbraucht 30 % weniger Wasser; Reduziert die Wasserverschwendung bei windigen Bedingungen. Doppelte Sprühdüsen für eine besonders gründliche Bewässerung.
Brand Rain Bird
Color Brown/Black
Country of Origin USA
Customer Reviews 4.7 4.7 out of 5 stars 276 ratings 4.7 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 0.89 x 0.89 x 2.1 inches
Item model number 12DSH
Item Weight 0.022 ounces
Manufacturer Rain Bird
Material Stainless Steel
Product Dimensions 0.89 x 0.89 x 2.1 inches
Style Pop-Up

3.7

7 Review
5 Star
75
4 Star
20
3 Star
3
2 Star
0
1 Star
2

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Eugene
Better near and far spray coverage
To adjust the spray distance and water output of this nozzle, turn the screw on top counterclockwise for an increase, or turn it clockwise for a decrease. To adjust which direction it sprays, you can remove the top of the sprinkler head and reinsert the nozzle tube. Some sprinkler heads are installed deep enough that pulling the top off is undesirable, so you can pull up the nozzle tube and twist it until it's rotated in the right direction. It should make clicking noises as it is turned. If there's no clicking, then you may be unscrewing the sprinkler from the pipe beneath it, or unscrewing the top of the sprinkler, so I prefer to turn it clockwise. I use this nozzle wherever I don't need an adjustable nozzle because it does a better job of providing even coverage both near and far. It works great wherever my sprinklers pop up high enough, which in my lawn requires at least a 4 inch sprinkler. I have a couple 2 inch sprinklers that don't come up enough, so the dual spray part of this nozzle sprays directly into the grass right next to it. It's not the fault of the nozzle, but a notification that I should swap out that sprinkler head. I've also found that this nozzle can directly replace some of the nozzles on my Orbit sprinklers. My only gripe with this nozzle, and all Rain Bird nozzles, is that the adjustment screw tightness has a lot of variation. Sometimes it's so tight that the nozzle must be pulled up and gripped tightly to adjust it, which results in a face full of water if you try this while the sprinklers are on, but other nozzles are loose enough that they can be adjusted just by turning the screw without holding onto the nozzle. Fortunately giving the adjustment screw a few turns to loosen it up before installing it is all it takes to resolve this minor issue.
Scritto da: Eugene
Good near and far spray coverage
To adjust the spray distance and water output of this nozzle, turn the screw on top counterclockwise for an increase, or turn it clockwise for a decrease. To adjust which direction it sprays, you can remove the top of the sprinkler head and reinsert the nozzle tube. Some sprinkler heads are installed deep enough that pulling the top off is undesirable, so you can pull up the nozzle tube and twist it until it's rotated in the right direction. It should make clicking noises as it is turned. If there's no clicking, then you may be unscrewing the sprinkler from the pipe beneath it, or unscrewing the top of the sprinkler, so I prefer to turn it clockwise. I use this nozzle wherever I don't need an adjustable nozzle because it does a better job of providing even coverage both near and far. It works great wherever my sprinklers pop up high enough, which in my lawn requires at least a 4 inch sprinkler. I have a couple 2 inch sprinklers that don't come up enough, so the dual spray part of this nozzle sprays directly into the grass right next to it. It's not the fault of the nozzle, but a notification that I should swap out that sprinkler head. I've also found that this nozzle can directly replace some of the nozzles on my Orbit sprinklers. My only gripe with this nozzle, and all Rain Bird nozzles, is that the adjustment screw tightness has a lot of variation. Sometimes it's so tight that the nozzle must be pulled up and gripped tightly to adjust it, which results in a face full of water if you try this while the sprinklers are on, but other nozzles are loose enough that they can be adjusted just by turning the screw without holding onto the nozzle. Fortunately giving the adjustment screw a few turns to loosen it up before installing it is all it takes to resolve this minor issue.
Scritto da: Dazzza
Great Replacement at Low Cost
These nozzles fit the 1800 series and UNI-Spray series sprinkler head bodies. They will also fit onto most other brands of sprinklers that use universal female thread nozzles. While Rainbird makes a wide range of nozzles, most are only available at specialty irrigation stores. Hardware stores and home centers tend to only carry a few of the most common nozzles. Rainbird makes a very good nozzle set with good water spray uniformity. Many of them have matched precipitation rates so you can mix different radius and pattern nozzles on the same valve zone without messing up the water application uniformity. Be careful of this as Rainbird's literature calls all of their nozzles "matched precipitation rate", but that does not mean they are all compatible with each other! For example, you should not use a 4 series VAN nozzle on the same valve circuit as a 5 series MPR nozzle. Read the nozzle descriptions for each series of nozzles below for details on which nozzles are compatible. The spray radius can be reduced up to 25% on all but a few specialty bubbler nozzles using a screw on top of the nozzle. Note that the separate screen must be installed under the nozzle for the radius adjustment to work correctly. If you remove or don't install the screen you won't be able to adjust the radius. The screens are provided with the nozzles when you purchase them. All Rainbird nozzles are constructed of high-quality plastic.
Scritto da: Padmapada
Easy fix for a damaged sprinkler head, saved lots of $$$
The folks who cut my grass tend to cut the heads off the sprinklers with their machines. In the past, I've called the sprinkler company to fix them, and ended up paying hefty service calls. This time I had a look and saw that the damaged head simply unscrewed. So I went to the local big box store and tried to find a replacement. The clerk tried to talk me into buying something that had threads on the OUTSIDE because, I guess, that is what he had in stock. But I needed a head with threads on the inside, one that would just screw down on top of the pop-up pipe. I saw this on Amazon and asked other customers if it had threads on the inside, and the answer was positive. So I bought this, and it took about 2 minutes to install. The head is clearly marked so that you can see which way the spray goes (this is a half circle), and there is a screw on top to reduce the diameter if you want. It is installed in the berm, or tree lawn, or verge, or curb strip, or whatever you call that narrow strip of lawn between the sidewalk and the street. Perfect. Good for all dialects.
Scritto da: Cindy
Good product
Product fit as described
Scritto da: Amazon Customer
Performance met the product description.
Did a lot better than the water savors you can buy.
Scritto da: Brenda Brennan
Perfect fit
Perfect to replace broken sprinkler head.

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array