Portamate-Werkzeughalterungen für Gehrungssägenständer und Arbeitszentren PM-7002

Name: Portamate-Werkzeughalterungen für Gehrungssägenständer und Arbeitszentren PM-7002
Brand: Bora
SKU: 0733169936643
Price: 95.95 EUR
Availability: InStock

Brand:Bora

3.6/5

€
95.95

PRODUKTBESCHREIBUNG Wenn Sie einen Gehrungssägenständer oder ein Arbeitszentrum von Portamate besitzen, dann sind diese Aufsätze genau das Richtige für Sie, um schnell verschiedene Maschinen und Werkzeuge daran anzubringen. Diese lassen sich an Ihren Werkzeugen (Gehrungssägen, Dekupiersägen, Hobelmaschinen usw.) befestigen und funktionieren mit den meisten Gehrungssägenständern und Arbeitszentren von PortaMate (PM-3600, PM-3900, PM-4000, PM-5000, PM-6000, PM-6300 und PM-7000). Das Beste daran ist, dass diese Halterungen an Ihren Werkzeugen bleiben können – sie sind stabil und eben, und wenn Sie sie immer an Ihren Werkzeugen haben, ist der Austausch der Maschinen an Ihrem Portamate-Sägeständer/Arbeitszentrum ein Kinderspiel (z. B. müssen Sie die Halterungen nicht entfernen). (von einem Werkzeug zum anderen.) Holen Sie sich ein Set für jedes Werkzeug, das Sie montieren möchten, und verwandeln Sie Ihren Sägeständer in eine vielseitige Schnellwechsel-Montagelinie! VOM HERSTELLER Mit den Quick-Mount-Maschinenaufsätzen PortaMate PM7002 können Sie Werkzeuge schnell und einfach austauschen. Robust, robust und einfach zu bedienen, ermöglichen sie Ihnen einen schnellen und einfachen Werkzeugwechsel und maximieren die Funktionalität Ihrer Werkbank. Passend für PortaMate-Modelle PM3900, PM4000, PM4400, PM5000, PM6000, PM6300 und PM7000 Gehrungssägen-WorkCenter.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0733169936643

Kategorien Werkzeuge & Heimwerken, Elektro- & Handwerkzeuge, Elektrowerkzeugteile & Zubehör, Sägeblätter, Teile & Zubehör, Accessories, Zubehör für Gehrungs Sägezubehör,

Der Satz mit 2 Halterungen für Elektrowerkzeuge funktioniert mit den meisten Gehrungssägenständern von Bora Portamate. Die Halterungen sitzen flach, wenn sie nicht am Ständer befestigt sind, und die Werkzeuge können auf der Werkbank oder einer anderen Arbeitsfläche verwendet werden. Funktioniert mit Gehrungssägen, Oberfräsen, Bandsägen, Dekupiersägen und vielen anderen Elektrowerkzeugen. Elektrowerkzeuge und Maschinen schnell und einfach an Werkzeugständern befestigen und abnehmen.

Batteries Included?	‎No
Batteries Required?	‎No
Customer Reviews	4.5 4.5 out of 5 stars 247 ratings 4.5 out of 5 stars
Included Components	‎PM-7002
Is Discontinued By Manufacturer	‎No
Item model number	‎PM7002
Item Package Quantity	‎1
Item Weight	‎4.5 pounds
Manufacturer	‎HTC
Part Number	‎PM-7002
Power Source	‎Crank
Product Dimensions	‎22 x 9 x 6 inches
Usage	‎Professional
Warranty Description	‎1 YEAR

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: tuff

These are great they fit my vevor miter saw stand

These are great they fit my vevor miter saw stand. I contacted vevor to buy replacement and was told they don't sell replacement parts for there products.very sad at that and now will not buy from them again. Was so glad I found these and that the company sell extra parts for there stands. These work just as good as the ones that came with the miter saw stand and are built heavy to boot.i would definitely recommend these if you have a square tube miter saw stand..

Scritto da: Shari Stankiewicz

Nice gift

I ordered this for a gift. He said it worked wonderfully.

Scritto da: Amazon Customer

Best miter saw stand

Love my miter saw stands, swap tools is a breeze.

Scritto da: Jeremy J.

Always great to have more of these

Bought these mounts to add another object to my existing workstation I bought when they first came out. really glad I did as these came with an offset bracket that made it so I could get rid of the piece of plywood I had to make my miter box fit properly on these things. Love them. Love this whole workstation.

Scritto da: wjg

A must have...

I love this stand. So much that I purchased additional brackets for another saw.

Scritto da: Kenyon the foot

Broke clamp right away

Brittle plastic, glad I dint cut my arm off!!!!!

Scritto da: bmeneses

Good product. Good customer support

Well designed. Works well . End cap was missing on one of the arms. Customer support sent me one immediately.

Scritto da: C. Wagner

Adds flexibility to my shop; beware of release failure

These mounts fit both my Makita 10" sliding miter saw and my Delta benchtop planer, allowing me to swap them out as needed. The only downsides are the plastic end caps occasionally pop off and I suspect they are made in China. If you have more than one tool that could be used on your PortaMate, I recommend picking up a set of these for each, as it sure speeds tool setup and tear down. Update 2017/12/16: I've had this system for 10 years in my home shop. The convenience is great, however one of the release lever spring clips snapped while I was trying to move my miter saw the other day. It took a lot of strength and some scratches to avoid dumping my saw on the ground. Note that these levers have not had a significant number of compression cycles, as I tend to leave tools mounted for long periods of time. I recommend mounting your tool so the release levers are to the back. This will cause the tool to fall towards you and reduce the likelihood of significant damage or injury. Lowering the rating to draw attention to this defect.

Scritto da: AM

Flimsy plastic clamping components

Bought this for a bora stand. The part that attaches to the saw is made of metal (orange in the pictures). However, the bits that clamp on to the saw stand rails are made of plastic. Cheap plastic without fibre reinforcement. I tried to attach the clamps to the stand without the saw attached, just to feel them out. They were not very confidence inspiring. I would say if you have a 8-10" non sliding , basic saw then they may be ok. Anything larger than that, look elsewhere.

Scritto da: Newfy

Really great Tool Mounts

I needed a pair of mounts for my mitre saw stand. Mine had broken in a move. I found these online, ordered them, and hoped for the best. Well, best is what I got. They fitted and worked perfectly. Would not hesitate to order them again if/when I break them. Thanks Bora.

Scritto da: Amazon Customer

Fit Perfectly

Tool mounts purchased as Warehouse Deal at ⅔ the price of new and described as Used - Very Good condition. The mounts received were accurately described, possibly better than expected with all mounting hardware and paperwork included. The mounts fit perfectly - snapped easily onto the rail of my Portamate PM-7000 mitre saw stand right out of the box - very pleased with how this worked out!

Scritto da: Bryan Ekers

Be certain you have one of the tables in the specifications or one that is near-identical.

I cannot fault the product at all, but it was my own carelessness that led to me to make the mistake of ordering these mounts for my Ridgid AC9946 mitre saw stand, and found out the AC9946 is too wide. Sadly I had to return the Bora Portamates, but the return process itself was quick and easy and I got my refund promptly, so high marks for service, though the mistake was entirely mine. Thank you.

Scritto da: Rod Bosch

Worth the money

The quick mount works well to attach the mitre saw to the saw table and the quick release mechanism works well. You can’t leave the saw attached if you are going to stand the table on end for storage though, but perhaps that is a good thing.