Malco TS1 Turbo-Schere, 20-Gauge-Kapazität, Blechschneideaufsatz

Name: Malco TS1 Turbo-Schere, 20-Gauge-Kapazität, Blechschneideaufsatz
Brand: Malco
SKU: 686046530208
Price: 113.69 EUR
Availability: InStock

Brand:Malco

3.7/5

€
113.69

PRODUKTBESCHREIBUNG Lässt sich direkt in das Bohrfutter einer Standard-Klima- oder Akku-Bohrmaschine mit 1200 U/min einsetzen. So einfach können Sie Ihre Bohrmaschine in eine elektrische Schere umwandeln! Schneidet gerade und nach links und ist in der Lage, durch enge geschwungene Muster und Quadrate in schwerem verzinktem Stahl der Stärke 20 (1,02 mm) zu navigieren. Für erstklassige Leistung ohne den hohen Preis einer speziellen elektrischen Schere ist sie eine einfache Ergänzung für jede Werkzeugtasche. AMAZON.COM Der Malco TurboShear verwandelt Ihre Bohrmaschine in eine elektrische Schere. Um dieses zeitsparende Werkzeug zu bedienen, setzen Sie die TurboShear einfach direkt in ein beliebiges 3/8-Zoll-Bohrfutter einer Standard-Klima- oder Akku-Bohrmaschine mit 1.200 U/min ein. Dieses robuste, aber ausdruckslose Accessoire schneidet gerade und nach links. Es führt schnelle Schnitte in Blech durch und ist in der Lage, durch enge Kurvenmuster und Quadrate in schwerem verzinktem Stahl der Stärke 20 zu navigieren. Blindschnitte erfordern nur ein 1/2-Zoll-Startloch. Zu den Schneidanwendungen gehören sowohl Eisen- als auch Nichteisenbleche, Dach-/Bauplatten aus Metall, Vinyl, Stahlgeflecht, Rohrleitungen und sogar das dicke Metall von Ofenmänteln, Gerätegehäusen oder Karosserieteilen von Automobilen. Durch das versetzte Design bleiben beide Hände von der Arbeitsfläche fern. Die langlebigen, gehärteten Backen sind ebenfalls austauschbar.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 686046530208

Kategorien Werkzeuge & Heimwerken, Elektro- & Handwerkzeuge, Elektrowerkzeuge, Scheren, Scheren & Nibbler,

Hergestellt in den USA. Die TSDC-Bohrklemme kann separat erworben werden. Navigiert durch enge Muster und quadratische Schnitte. 20-Gauge-Kapazität aus verzinktem Stahl. Wird in das Bohrfutter einer Klimaanlage oder eines Akku-Bohrschraubers eingesetzt. Verwandelt Ihre Bohrmaschine in eine elektrische Schere.

Batteries Included?	‎No
Batteries Required?	‎No
Blade Length	‎3 Inches
Color	‎Na
Customer Reviews	4.7 4.7 out of 5 stars 2,367 ratings 4.7 out of 5 stars
Included Components	‎Bare-Tool
Is Discontinued By Manufacturer	‎No
Item model number	‎TS1XXX
Item Package Quantity	‎1
Item Weight	‎1 pounds
Manufacturer	‎Malco
Material	‎- Select -
Measurement System	‎Metric
Part Number	‎TS1
Power Source	‎Hand Powered
Product Dimensions	‎8 x 4 x 1 inches
Size	‎1 Pack
Style	‎Cutting Attachment
Warranty Description	‎1 Year

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Wk outdoors

Works well

While it's not as nice as a regular power shear it works very well. I bought this instead of a regular shear because i don't do enough steel to justify a battery shear but i needed to cut several long sheets. It cuts faster than you can go and stay straight with the cut. I run it about ½the speed it can go so i can have control. Overall i would rate it very high as it performs very well for what it is designed for.

Scritto da: Don McCall

Need to get the one that has the handle on it

Works good but hard to hang on to it with out the handle

Scritto da: HELIO J ZAVALZA

This tool helps

Great tool but i think it should last sharpened longer. I could also be bigger because wavy metal is more problematic

Scritto da: Karen Sue Gibbs

Awesome tool

This is by far the best inexpensive tool I ever purchased. I am buying the one handed clamp also.

Scritto da: Big Spaghetti

Works really well on sheet metal, but sucks that I have to use two hands

Cut corrugated roofing well

Scritto da: Trent

Equivalent to sliced bread

You'll have to find the angle to hold the drill and the cutters handle to drive it. Once you get the feel you'll be less hard on the blades and better be able to preserve the quality of the blade's edge. Worth there weight in gold. Doing HVAC, one dude bust them out on the first job I was on. Seen what they did instantly knew I had to have those, one of the better if not best purchased tool for hvac purposes. No need for carpal tunnels now????

Scritto da: Zach

gotta find the sweet spot but this tool is essential

takes a few times to find the sweet spot for the smoothest fastest cut but well worth it. emphasis on using the tool properly for best results

Scritto da: Robert E

A must-have tool for residential install.

Ready to go right out of the package. Great for cutting out the side of a furnace or a spot you don’t want to do by hand.

Scritto da: Leaff

Need three hands. Could be good for you. It depends.

Because the unit swivels on the drill attachment, you need three hands to both hold the piece your cutting and the appliance. I work alone in place other than a work shop that makes it difficult to do both hold the piece and use the cutter. If there was an option to lock and unlock the cutter depending on use, I would have kept it. Unfortunately. I returned the item. It didn’t suit me but could suit you depending on how you work. I assume it cuts well even though I haven’t managed to use it and actually cut something.

Scritto da: Jesse H.

Great tool

I am an Hvac tech I have a lot more expensive electric shears. These work just as good for a fifth of the cost. They fit nicely in your tool bag and will work in any drill or impact which we all have already. I haven’t had them long but even if they only last a couple years it’s worth the money you can buy five for what I paid for my makita shears. They turn corners sharp and cut relatively fast. All in all I am happy with my purchase.

Scritto da: Marco

Amazing product

This is my second one. Live it for cutting open furnaces for return boots. Saves my wrists and time. Highly recommend and get all my techs to purchase. In the hvac trade this helps in most jobs wether it’s tin banging or cutting in humidifiers to Ac doors etc!

Scritto da: Amazon Customer

Love it

This works great. Ive only used on 24g but it Feels solid. Very easy to use. I'd recommend. I can see there will be times the handle may not fit when I have to cut in tight spaces. It would be nice to have the option of screwing the Handel into the side as an option one day but overall I dont regret buying this. Very Very handy.

Scritto da: Andrew Price

Solid performer

Cuts really well and feels well made. Takes a little practice to get over humps in ridged roofing/siding metal -- clamping down the work helps a lot, but overall a big step up from manual snips or grinding disks. Attaches to impact driver easily and is certainly way cheaper than a dedicated tool. No visible wear so far after a few dozen long cuts.