Jonard Tools EPD-91461, manuelles Auflegewerkzeug mit 2 Stahlklingen 66 und 110 für Auflegeblock-Werkzeug + 2 Klingen 66 und 110

Brand:JONARD TOOLS

3.6/5

79.69

Das Jonard Tools EPD-91461 Auflegewerkzeug mit 2 Klingen 66 und 110 ist zum Anschließen und Trimmen von Drähten in Kreuzverbindungsblöcken im 66er- und 110er-Stil und Wandbuchsenmodulen im 110er-Stil konzipiert. Dieses Auflegewerkzeug ist perfekt für jeden Telekommunikations- oder Datenkommunikationsinstallateur. Das Werkzeug schließt Drähte in 66er- und 110er-Kreuzverbindungsblöcken und 110er-Wandbuchsenmodulen sauber ab und schneidet sie sauber ab. Darüber hinaus verfügt es über Einstellungen für hohe/niedrige Schlagkraft, eine Haken-/Spudger-Kombination, die im Gehäuse untergebracht ist und zur Vereinfachung der Verwendung farblich in Gelb und Blau gekennzeichnet ist , vergrößertes Klingenaufbewahrungsfach für einfache Lagerung, getestet bis zu 100.000 Zyklen bei hoher Schlageinstellung, um eine lange Lebensdauer während des Gebrauchs zu gewährleisten, kompatibel mit allen Klingen unserer EPB-Serie und anderen ähnlichen Marken. Dieses Produkt hat ein Leben lang.

VIELSEITIGE VERWENDUNG: Einstellbare Einstellungen für hohe/niedrige Schlagkraft und kompatibel mit allen Klingen unserer EPB-Serie und anderen ähnlichen Marken (separat erhältlich). HOHE HALTBARKEIT: Getestet bis zu 100.000 Zyklen bei hoher Schlageinstellung. Die Klingen bestehen aus gehärtetem legiertem Stahl und sind vernickelt, um eine lange Lebensdauer während des Gebrauchs zu gewährleisten. Farbcodiert: Der farbcodierte Körper ist zur einfacheren Verwendung zur Hälfte gelb (Schnittseite) und zur Hälfte blau. PRAKTISCHES DESIGN: Schlankes und ergonomisches Design mit kombinierter Haken-/Spatelkombination im Gehäuse und vergrößertem Klingenfach zur einfachen Aufbewahrung. WAS IST DARIN: Auflegewerkzeug, 66 Klingen, 110 Klingen.
Item model number EPD-91461
Manufacturer Jonard
Product Dimensions 1.5 x 3.5 x 10.25 inches; 6.35 Ounces

3.6

13 Review
5 Star
76
4 Star
14
3 Star
5
2 Star
0
1 Star
5

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: P.M.
This tool replaces a 20-year-old tool that got dropped and is just as good
I have had a punch down tool for the last 20 years. It is not one that I use all the time but when I need it it is there. Over the years of plastic deteriorated and when I dropped it this time when using it it cracked and broke and it was time for a new one. I looked at the different reviews and this tool looked very similar to what I had already and had the same features. I purchased this and used it to finish the job I was on it works very well the existing cutters that I had for my old tool will fit in the new one that's a plus. So if you need one of these this is a really good tool and should be top of your list.
Scritto da: Jim B
Good enough
The knife on this tool has a hard time cutting all the way through the wire and does get stuck in tighter knives. It's fine for smaller jobs, but I would not want to punch down several dozen ends in a day.
Scritto da: Carlene S. Metteer
Worthy Buy
I work as a low voltage electrician and bought this as a back up punch. The quality is every but as good as my Fluke punch for the half the price.
Scritto da: J. Bollinger
A quality classic -- never goes out of style.
This is the classic punch down tool by Jonard. You cant go wrong with this purchase. They will last for years unlike the Klein tool I just returned.
Scritto da: B. K. Speck
Good Punchdown Tool
Bought this to replace my twenty year old Paladin Tools Punchdown that broke. So far, so good!
Scritto da: bodezutpha
Great tool for 1/3 of the price of a Fluke
Had it for about a month and pleased with it so far. I work in the telecom industry and use punch tools daily. Construction and quality is good and comparable to a Fluke brand at three times the price. My only complaint is that I wanted to continue using my old Fluke 110 blade with the Jonard tool but it wouldn't fit when I tried to insert it by hand. My Fluke 66 blade did insert in the tool with no problem. The 110 blade would probably go in if I forced it but I'll just use the Jonard 66/110 blade that came with the tool.
Scritto da: SkydivingNerd
Hard To Use On 66 Blocks
I'd have to agree with Drake's review. The 66 blade isn't sized correctly and it's hard to get over the 66 contacts. And once you've punched down the wire, it's difficult to pull the blade off. Luckily I just need it for a few punches here and there but this will really slow down anyone who has even a moderate amount of punching to do. A better quality Fluke blade might work on this tool but if you're going to spend the money for a Fluke blade you might as well get the Fluke tool too.
Scritto da: Whod101
Good product
Good product ????
Scritto da: Darryl H
Used this to install some RJ-45 into a small patch ...
Used this to install some RJ-45 into a small patch panel at home. Works as advertised. Pros: - Inexpensive - Seems rugged - Does what's on the tin - Hooks on the side come in handy for removal of old wires and mistakes Cons: - Blade release dial on the bottom is really tight - There is a space in the back for a backup bit, but no backup bit is sold with the unit.
Scritto da: Stephane Lainesse
aime pas
fonctionne pas comme les autre punch que j ai utilisé
Scritto da: Gagan
Good Product So Far, Used for a Month Now
It’s a Good Product and so far working well. Blades are Good.
Scritto da: Jose Angel
Buenas herramienta
LLego en su empaque correctamente , veremos que tal su desempeño en los siguientes dias , pero por las primeras pruebas esta funcionando bien
Scritto da: Greg
Excellent.
Way better than the little plastic ones. Now I work like a pro.

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array