Husky Liners – hintere Kotflügel

Brand:Husky Liners

3.3/5

461.73

Husky-Schutzbleche passen perfekt zu Ihrem Kotflügel. mehr als gewachsen für alles, was die Straße mit sich bringt. Bietet dank seiner thermoplastischen Konstruktion nagelfesten Schutz für Ihren LKW, Transporter oder SUV. Entwickelt für ultimative Schlagfestigkeit und die zusätzliche Unbesiegbarkeit von Husky Shield für eine zusätzliche Schutzschicht für den Lack Ihres Fahrzeugs. Erhältlich in einfacher oder doppelter Werksreifenbreite. Stolz hergestellt in den USA, mit lebenslanger Garantie – wie alle Husky-Produkte.

Keine Einheiten verfügbar

EAN: 753933791018

Kategorien Automobil, Außenzubehör, Schmutzfänger & Spritzschutz,

LEBENSLANGE GARANTIE – Stolz hergestellt in den USA. Wenn wir sagen, dass es „lebenslang garantiert“ ist, meinen wir genau das. Kein Ärger, kein Unsinn. Wenn Sie ein Problem mit diesem oder einem anderen Husky-Produkt haben, ersetzen wir es. VERBESSERTE LOOKS – Eine sofortige Verbesserung des Aussehens Ihres Fahrzeugs mit einem eleganten Stil, der aussieht, als käme es aus der Fabrik, mit etwas zusätzlichem Custom-Flair. EINFACH ZU INSTALLIEREN – Ein paar Schrauben und ein paar Minuten genügen, um die Kotflügel so zu montieren, dass sie jedes Mal perfekt zu Ihrem Fahrzeug passen. SCHLAGFESTE KONSTRUKTION – Dank der nagelfesten, schlagfesten thermoplastischen Konstruktion hält das Gerät lebenslanger Beanspruchung stand. Mit proprietärer Husky Shield-Folie für eine unsichtbare Schutzschicht. PASST WIE IM WERK – Speziell für Ihre Marke und Ihr Modell gefertigt und bietet eine perfekt maßgeschneiderte Passform. Erhältlich mit Vollprofilabdeckung für Einzel- oder Doppelreifenbreite. AUSSTATTUNG: 2014–2018 Chevrolet Silverado 1500, 2015–2019 Silverado 2500/3500, 2019 Silverado 1500 LD mit einzelnen Hinterrädern, 2 Stück.
Brand Husky Liners
Brand ‎Husky Liners
Color Black
Color ‎Black
Country of Origin ‎USA
Customer Reviews 4.2 4.2 out of 5 stars 569 ratings 4.2 out of 5 stars
Exterior ‎Painted
Finish Type ‎Powder Coated
Fit Type Universal Fit
Fit Type ‎Universal Fit
Installation Type ‎Screw In
Is Discontinued By Manufacturer ‎No
Item model number ‎79011
Item Weight ‎11 pounds
Manufacturer ‎Husky Liner
Manufacturer Part Number ‎79011
Model ‎79011
OEM Part Number ‎79011
Position Rear
Position ‎Rear
Special Features ‎Wheel Well Liners; Wheel Well Protection
Vehicle Service Type 2014-2018 Chevrolet Silverado 1500, 2019 Chevrolet Silverado 1500 Legacy, 2015-2019 Chevrolet Silverado 2500 HD No, 2015-2019 Chevrolet Silverado 3500 HD SINGLE REAR WHEELS No See more
Vehicle Service Type ‎2014-2018 Chevrolet Silverado 1500, 2019 Chevrolet Silverado 1500 Legacy, 2015-2019 Chevrolet Silverado 2500 HD No, 2015-2019 Chevrolet Silverado 3500 HD SINGLE REAR WHEELS No

3.3

13 Review
5 Star
66
4 Star
15
3 Star
5
2 Star
3
1 Star
11

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Angel
Muy bueno
Perfectamente y acopla con todos los huecos
Scritto da: Samuel
Good
90%
Scritto da: Samuel Shaw
Fit was great no problem here
2017 Silverado HD , fit great no drilling
Scritto da: Ty Faichney
Awesome Upgrade
I included before and after photos. The stuff that comes stock are impossible to keep clean and will hold literally anything that gets stuck to it. They’re sturdy, making them a little harder to get around the wheel, but I let them sit in the sun while taking the old off, after that they were soft enough to easily move around. Install was super easy anyone could do it. If you’re not taking off your wheel make sure you have a small ratcheting screw driver for the screws towards the bottom! I’d say this took me an hour total, including washing the wheel wells before putting on the new ones.
Scritto da: Chris S.
Fitment is an issue
Purchased these for a 2016 Silverado WT that did not come with factory liners in the rear. As far as the material goes, it is thick plastic and seems well made. I like the gloss as it cleans very easily. The fit is an entirely different story. First, the product does NOT cover the round tube holes in the frame so you will need caps for those. Second, once you have the caps in it is very difficult to install the liner because part of one section half covers one of the holes and makes the alignment off. The box they come in twists and bends the liners out of shape. I had to use a heat gun to reform the liners back into shape. Two of my bolt holes were off by an inch, one of them had a drill mark stated where it should be but it looks like the bit slipped and the hole was in the wrong place. I also had to clean the holes out of the drilled plastic chunks as they did not come cleaned out. Getting these things in was a challenge. Took two people, one to line up the holes and press the plastic into place and another to get the screws in. It definitely was not a drop in place and put in some screws, it took serious effort to get it lined up enough to put the screws in.
Scritto da: Ron
Fit
Fit very good a little thin in corners
Scritto da: Trish Luckey
Just installed today.
I can’t speak to durability while they seem fine time will tell. They were relatively easy to install and provide the protection I was looking for.
Scritto da: Cody Mallory
Holes didn't line up, VERY TIGHT FIT
I bought this product because I noticed the factory felt liners in my 2016 Silverado were trapping the salt put on the roads in the winter. Because of this I am already seeing signs of rust, and wanted to rip them out. They were warped when they came in the box which I believe contributed to the holes not matching up. I had to drill the hole out a little bigger. Also, there are only 4 holes on one liner, where there are upwards of 12 or so threaded holes in the fenders from the factory. Would've been nice to have more holes so I can feel confident they won't fall out. But they won't fall out because they were a TIGHT FIT. Taking them out will be a process if I ever decide to at some point. I even scratched some of the paint off of the fender lip when installing them. They really weren't an easy install. I recommend like some of the others in the reviews, cutting about 1/2" off.
Scritto da: Amazon Customer
remove hole plugs already installed on the vehicle where you have to attach the wheel well liner .
This can be installed without removing the tire but is easier to do with the tire off in my opinion. Looks good when installed on the vehicle.
Scritto da: Amazon Customer
It works but not the greatest manufacturing.
yes the product will fit, with a bit of force. HOWEVER, clearly the Husky Brand does not care about finish on this product, many of the edges look like they were cut with a bandsaw after the moulding process, uneven grind marks, and just general lowsy finish on the product. So yes the product fits and works. Yes once installed the product looks decent. But don’t expect a well manufactured product when unboxing it.
Scritto da: Kendyn
Good quality install was not the easiest
Over all good condition install was a little tough just wrestling to get them to fit.
Scritto da: Sean Walsh
good product
remove the wheel for install. save your self the aggravation
Scritto da: Amazon Customer
Good quality piece
I put these on my 2015 Duramax, quick easy install, the mould fits like a glove. Washing my wheel wells takes seconds now compared to minutes with the factory carpet liner... anyone with a Silverado/Sierra I would recommend these. Also shipping was quick

Verwandte Produkte

hot
Husky Liner – Hinterradkastenschutz
3.6/5

€ 609.27

Husky Liner – Hinterradkastenschutz
3.6/5

€ 609.27

hot
Husky Liners – hintere Kotflügel
3.3/5

€ 461.73

Husky Liners – hintere Kotflügel
3.3/5

€ 461.73

hot
Husky Liners – hintere Kotflügel
3.9/5

€ 154.63

Husky Liners – hintere Kotflügel
3.9/5

€ 154.63

hot
Husky Liners – vordere Kotflügel
3.6/5

€ 91.55

Husky Liners – vordere Kotflügel
3.6/5

€ 91.55

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array