Freud C460: 8 x 3/4 x 1/8 Hochgeschwindigkeitsstahl-Industriehobel- und Abrichtmesser, 8 Zoll x 3/4 Zoll x 1/8 Zoll Abrichtmesser – 3-teiliges Set

Name: Freud C460: 8 x 3/4 x 1/8 Hochgeschwindigkeitsstahl-Industriehobel- und Abrichtmesser, 8 Zoll x 3/4 Zoll x 1/8 Zoll Abrichtmesser – 3-teiliges Set
Brand: Freud
SKU: 0008925660354
Price: 77.89 EUR
Availability: InStock

Brand:Freud

3.6/5

€
77.89

PRODUKTBESCHREIBUNG 8 (L) Industrie-Hobel- und Abrichtmesser aus Hochgeschwindigkeitsstahl VOM HERSTELLER Genießen Sie mit diesem 3-teiligen Abrichtmesser-Set eine anhaltend überlegene Leistung Ihres Freud-Abrichtmessers. Die Hobel- und Abrichtmesser von Freud Industrial bestehen aus hochwertigem Schnellarbeitsstahl für ultrascharfe Kanten und eine längere Lebensdauer. Diese Messer sind auf Rasiermesserschärfe vorgeschliffen und für optimale Genauigkeit und reibungsloses Schneiden präzisionsgefertigt. Ihr Kauf ist durch die eingeschränkte lebenslange Garantie von Freud abgedeckt. EIGENSCHAFTEN * Hochgeschwindigkeitsstahlkonstruktion für stabile Verbindungen und solide Werkstücke * Präzisionsgefertigt für absolute Genauigkeit * Vorgeschliffen für überragende Schärfe * Abgedeckt durch Freuds eingeschränkte lebenslange Garantie TECHNISCHE DATEN * Länge: 8 Zoll * Breite: 3/4 Zoll * Dicke: 1/ 8 Zoll * Anzahl der Teile: 3

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0008925660354

Kategorien Werkzeuge & Heimwerken, Elektro- & Handwerkzeuge, Elektrowerkzeugteile & Zubehör, Sägeblätter, Teile & Zubehör, Blades, Sägeblätter,

Abgedeckt durch Freuds eingeschränkte lebenslange Garantie. Für den glattesten Schnitt messerscharf vorgeschliffen. Hochwertiger Hochgeschwindigkeitsstahlschaft für die schärfste Schneide und längste Lebensdauer. Präzisionsgefertigt für beste Ergebnisse. Spezifikationen: Länge 8, Anzahl der Teile 3, Dicke 1/8, Breite 3/4.

Batteries Required?	‎No
Brand	Freud
Brand	‎Freud
Color	Multi
Color	‎Multi
Country of Origin	‎Italy
Customer Reviews	4.6 4.6 out of 5 stars 267 ratings 4.6 out of 5 stars
Included Components	‎Specs: Length 8", Number of Pieces 3, Thickness 1/8", Width 3/4"
Item Dimensions LxWxH	1 x 1 x 1 inches
Item Dimensions LxWxH	‎1 x 1 x 1 inches
Item model number	‎C460
Item Package Quantity	‎1
Item Weight	9.6 Ounces
Item Weight	‎9.6 Ounces
Manufacturer	‎Freud
Material	Blend
Material	‎Blend
Number Of Pieces	3
Number Of Pieces	‎3
Part Number	‎C460
Product Dimensions	‎1 x 1 x 1 inches
Size	‎One Size
Style	8-Inch x 3/4-Inch x 1/8-Inch Jointer Knives - 3-Piece Set
Style	‎8-Inch x 3/4-Inch x 1/8-Inch Jointer Knives - 3-Piece Set

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: tyer

Order these before

They come well packaged and they are just like the other I order

Scritto da: JCIII

Good blades

I installed these on a Shop Fox 8" dovetail jointer. They are a tad taller than stock blades so there was a little learning curve installing and adjusting. Take your time, they are very sharp (as expected). I purchased two 3 packs because the jointer has 4 blades. I will likely buy more. The price is fair considering they are pretty decent quality.

Scritto da: Chumlee

Know your thickness

These knives are very sharp and very nice. The only issue I had was the thickness was .003 over. For my older model jointer this was just to thick so I had to have them ground. My drum grooves measured .124 so this was a minor problem for me not because of these knives. I would highly recommend these knives if your jointer will except them

Scritto da: boatbuilder77

Used in Grizzly 6" Jointer

These were listed much cheaper (about six teen dollars) than any jointer blades that fit my grizzly jointer (G1182). Only problem with these; they are too long at 6.5 inches. This is probably why they are so cheap. I have not seen too many 6.5" jointers. I knew they were too long when buying them. I used my abrasive cutoff wheel to trim them to the correct length, which took about 30 seconds and worked well. A little cleanup on my wire wheel, and i have a cheap set of knives to alternate in. The fit is fine other than the length. I installed and ran through some test Cherry, then went to work on some knotty yellow pine, and face jointed some 6" fir. No issues. cut is clean, and blades remain sharp. Seems to be a very good deal for my application. I ordered a second set now that I know it's not to difficult to trim them to length. Not sure about durability, but for the price, you cant go wrong, and I'll always have a sharp set using a decent sharpening service.

Scritto da: Len

Poor Quality

I had some Freud knives on my jointer. They lasted for years. In fact, I used them to make my kitchen cabinets. I wanted a cleaner cut so I bought some PowerM….. blades form amazon. They were slightly cheaper than the Freud knives. They were not flat so I returned them and go Freud knives thinking they would be better. I also purchased a Oneway gauge to hep set them up. While installing them, I drug the gauge across the knives, they were flat except the outer inch or so. Two were down over 10 thousands one side and one was high over 10 thousands on the other side. Did this several times just to convince myself that this was accurate. Essentially, I was able to get the center very flat, I didn't have time to wait for another set so I went ahead and used them thinking I could use the center portion of my 8" jointer an make do. I planed up some soft maple and it worked good for about two hours. Once I started jointing, I must have gotten to close to the right side (the side with the blade with the high edge). I noticed a substantial grove in the wood. Sure enough, the blade with the high edge is now missing it's edge. I know it's the same one because I marked it. I have now taken my old freud knives and my original set of Delta knives down to be sharped. The machinist says when I get them back, the will be +/- two thousands. Plus I know they are both made out of good steel (USA).

Scritto da: wendy

Expected sharper blades.

Not as sharp as I expected. However, the steel is of good quality.

Scritto da: bernard

Good quality

Does what we expected of quality tool

Scritto da: John Clayton

these blades are made by Freud

can't go wrong with Freud blades

Scritto da: Mike M.

Just terrible

I spent the extra money because I saw the Freud brand and have always had good success with them in the past. Looking at the blades first thing I noticed was their edges were not straight. One was cupped, one was bowed and one was just dull. Figured the cup and bow would cancel out and I can honed the dull one. In a rush and have an order I need to get done. Go to install them and it’s going easy enough with the knife jig I have. Get two in and on to the third. And then I realized it’s the wrong size. It’s a solid 1/8 taller than the other two. I’m not putting these in my machine to vibrate it apart or having to adjust the out feed table up an 1/8 inch. Packed ‘em up and send them back. Come on Freud!

Scritto da: Tarek Elbaradie

Dull, vibrate and noisy. Poor quality from Freud!

Disappointed in the quality from Freud. They produce better blades for table saws and miter saws. Their router bits are great. Jointer blades are poorly finished!

Scritto da: Paul Wang

One knife has a chip in the middle

Seems one of the knife is not a new one

Scritto da: nathalie

Couteau

Tres content

Scritto da: Ryan T

Three Stars

came dull out of the package and 'pounded' the wood. Once honed, the blades were ok.