CURT 14082 Anhängerkupplung der Klasse 4, 2-Zoll-Empfänger, passend für ausgewählte Ford-, Chevrolet- und GMC C/K-Lkw

Brand:CURT

3.5/5

640.39

Als erster seiner Art nutzt der revolutionäre SlōRoller die patentierte Harvard-Wissenschaft, die einen Kamado Joe in einen der besten Smoker der Welt verwandelt. Durch die Verteilung von Rauch und Hitze in rollenden, rezirkulierenden Wellen umhüllt der SlōRoller Lebensmittel mit Wolken köstlichen Rauchs und verteilt gleichzeitig die Hitze gleichmäßig – was zu einem verbesserten Geschmack und einer deutlich reduzierten Reduzierung von Hot Spots führt.

Keine Einheiten verfügbar
EINFACH ZU INSTALLIEREN. Diese Anhängerkupplung der Klasse 4 bietet eine individuelle Passform für ausgewählte Modelljahre des Chevy C30, C3500, C3500HD oder Silverado 3500, Ford F Super Duty, F350, F350 Super Duty, F450 Super Duty oder F550 Super Duty und GMC C3500, C3500HD oder K3500. Rost-, splitter- und UV-beständig. Diese Anhängerkupplung ist durch eine einzigartige Doppelschicht aus rostbeständigem flüssigem A-Coat und haltbarer schwarzer Pulverbeschichtung geschützt. Die Oberflächen härten gemeinsam aus und sorgen für eine außergewöhnliche Beständigkeit gegen Rost, Absplitterungen und UV-Strahlen. VOLLSTÄNDIG GETESTET. Jedes CURT-Anhängerkupplungsdesign der Klasse 4 wird in unserem technischen Werk in Detroit unter realen Fahrzeugbedingungen getestet. Die Anhängerkupplungen werden gemäß den SAE J684-Standards getestet, um höchste Sicherheit und Zuverlässigkeit beim Abschleppen zu gewährleisten. VIELSEITIGES DESIGN. Diese Anhängerkupplung der Klasse 4 stattet Ihr Fahrzeug mit einer standardmäßigen 2 x 2 Zoll großen Anhängerkupplungsaufnahme aus und ermöglicht so eine Vielzahl von Anhängeroptionen. Es kann eine Kugelhalterung, einen Abschlepphaken und anderes robustes Abschleppzubehör aufnehmen. ZUVERLÄSSIGE STÄRKE. Diese Anhängerkupplung ist für 10.000 Pfund ausgelegt. Gesamtgewicht des Anhängers: 1.000 Pfund. Zungengewicht: 12.000 Pfund. Gewichtsverteilungskapazität und 1.200 Pfund. Gewichtsverteilung der Zungenlast (beschränkt auf die Zugkomponente mit der niedrigsten Bewertung).
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 100 ratings 4.5 out of 5 stars
Exterior ‎GLOSS BLACK POWDER COAT
Finish Type GLOSS BLACK POWDER COAT
Is Discontinued By Manufacturer ‎No
Item model number ‎14082
Item Weight 39 Pounds
Item Weight ‎39 pounds
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎14082
Material Carbon Steel
Model ‎Class 4 Hitch
OEM Part Number ‎14082
Product Dimensions ‎42 x 9 x 20 inches
Vehicle Service Type Pickup Trucks, Marine-Personal-Craft, Van, Sport-Utility-Vehicles, Truck, Trailer

3.5

10 Review
5 Star
78
4 Star
4
3 Star
9
2 Star
4
1 Star
5

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Dan Loo
Seems to be great. Sturdy. Bolted right up to my skoolie
I have a 34" frame on my skoolie. This bolted right up. Seems very sturdy, and had no issues. Bolts seemed to be painted gold, like normal grade 8 bolts are. When I had to take one off all the color was gone and it looked like a normal bolt. Hopefully they'll hold up. I'd definitely get it again. I think it will work well.
Scritto da: Benjamin L.
Buy new drill bits
Fit my 1979 Chevy K10 shortbed perfect. Drilling the frame upside down isn't fun, get some new bits. I used some other Grade 8 hardware I had on hand since the squarer washers weren't contacting the frame. No big deal.
Scritto da: Anthony L
Quality hitch and hardware!
1986 GMC K35. I welded tubing to a floor jack and slid into the hitch for ease of mounting as there has to be holes drilled no matter where it’s positioned. Hardware is the best I’ve seen in a mounting kit. Wouldn’t hesitate to buy anything from Curt.
Scritto da: Noah Dater
Needed drilling and bumper removal, but looks great
Installed this on my 1969 c20 long bed. Needed to drill 2 holes on each side of the frame to bolt it up. I have a replacement aftermarket stock bumper and needed to remove it to install the hitch as the hitch bolts hit the bumper frame when you were trying to drop them into place. Also trimmed 3/8” off of the bottom of the license plate frame to get it to clear. Took an hour longer than expected, but looks great and is very heavy duty.
Scritto da: Marie Marcogliese
Will NOT fit a 73-91 Suburban... but did it say that???
I bought this hitch for obvious reasons: Class IV hitch for a class II price. Excellent! The BIG type said it fits my '87 Sub, but it won't w/out replacing/relocating my gas tank. Went back to Amazon site and found it says "in SMALL type: "This will fit your '87 Suburban. EXC CARRYALL/SUBURBAN/PANEL." So, WTF is it telling me it fits my 87 Sub? Dugh! Bottom line I'd like to keep this hitch as have been looking for a long time for this bargain. Can I make it fit and will it be a safe class IV hitch? We shall see. When I received the hitch I was ecstatic. Then utterly dismayed and angry when I found it didn't just bolt right up. This hitch is for pick up trucks w/straight 34" rails and a spare tire hanging underneath. NOT a Suburban w/a rear GAS TANK between the rails. Be warned! Read the SMALL print over and over, then triple check the manufacturers info... and then triple check it all again. The only consolation I have is that if I can't make it fit, then it was such a deal that I know I'll get my money back selling it on Craigslist to a guy with a Chevy PICKUP. Screw return shipping. As they say: "Buyer beware."
Scritto da: Ronda Jo Alleman
Bought the special deal damaged package scratched pant still usable.
Tow package was actually bent on both ends. It wasn’t a big deal for me I was able to porta power them out easy enough. But it would be a good idea to actually look at them stating chipped paint and delivering a bent tow package it’s really honest business practice. Paint was flawless the packaging protected the paint from whatever happened to it. Either way I was happy with it, but the next person might not be
Scritto da: Amazon Customer
Fits ford highboy
Bolted right up to my 1976 Ford F-250 4x4 aka highboy
Scritto da: Ricko
Well built & solid
The title says it all.
Scritto da: Diana
FIT PERFECT, ALL HARDWARE PROVIDED.
Fit great, all hardware provided. Would recommend this product from this company 100%.
Scritto da: Lee Martel
It fit as advertised
The hitch fit perfectly

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array