Control Devices-M2525-1WA Messing-Kugelrückschlagventil, 1/4 NPT Außengewinde 1,30 Zoll M2525-1WA

Brand:Control Devices

3.5/5

25.43

Das Kugelrückschlagventil von Control Devices bietet eine dichte Abdichtung und kann als Tankrückschlagventil für kleine Kompressoren oder als Komponente in pneumatischen Kreisläufen verwendet werden. Der Ventilkörper besteht aus Messing für Korrosionsbeständigkeit, Duktilität bei hohen Temperaturen und geringe magnetische Permeabilität. Messing kann mit Kupfer, Messing, Kunststoff, Aluminium und geschweißtem Stahl verbunden werden. O-Ringe aus Fluorkohlenstoff sorgen für eine höhere Temperatur- und Chemikalienbeständigkeit. Es verfügt über NPT-Innengewinde (National Pipe Taper) an einem Ende und NPT-Außengewinde am anderen Ende zum Anschluss eines Rohrs mit Außen- und Innengewinde. Die NPT-Gewinde sorgen für eine dichtere Abdichtung als gerade Gewinde. Der maximale Druck beträgt 250 Pfund pro Quadratzoll (psi) und die maximale Temperatur beträgt 250 Grad Fahrenheit. Rückschlagventile haben zwei Anschlüsse und begrenzen den Fluss von Flüssigkeiten und anderen losen Materialien durch ein Rohr oder einen Durchgang in eine Richtung. Der Fluss tritt durch einen Anschluss ein und durch den anderen wieder aus und schließt sich, wenn sich der Fluss umkehrt oder stoppt. Zwei gängige Arten von Rückschlagventilen sind Kugelkegelventile und Rückschlagventile. Ein Kugelkegelventil verwendet eine federbelastete Kugel, die an einer kegelförmigen Innenfläche anliegt, um den Flüssigkeitsfluss in Vorwärtsrichtung zu stoppen, und ein Rückschlagventil verfügt über eine bewegliche Scheibe an einem Scharnier, um den Rückfluss zu blockieren. Rückschlagventile werden nach ihrem Öffnungsdruck bewertet (dem minimalen Vordruck, der für den Betrieb des Ventils erforderlich ist) und werden in verschiedenen Wasser-, Gas-, Luft- und Dampfleitungen verwendet. Control Devices stellt Spezialventile, Düsen und Kondensatfallen her. Das 1963 gegründete Unternehmen mit Hauptsitz in Fenton, MI, erfüllt die ASME-Standards.

Maximaler Druckwert von 250 psi und maximale Arbeitstemperatur von 250 Grad Fahrenheit. NPT-Innengewinde und Außengewinde zum Verbinden von Rohren mit unterschiedlichen Enden. O-Ringe aus Fluorkohlenstoff für höhere Temperatur- und Chemikalienbeständigkeit. Messing für Korrosionsbeständigkeit, Duktilität bei hohen Temperaturen und geringe magnetische Permeabilität. Kann als Tankrückschlagventil für kleine Kompressoren oder als Komponente in pneumatischen Kreisläufen verwendet werden.
Brand Control Devices
Exterior Finish Aluminum,Copper,Plastic,Steel
Inlet Connection Type National Pipe Tapered
Item model number M2525-1WA
Manufacturer Control Devices
Material Brass
Number of Ports 2
Outlet Connection Type MNPT
Package Dimensions 5.2 x 5 x 0.4 inches; 1.44 Ounces

3.5

8 Review
5 Star
71
4 Star
17
3 Star
5
2 Star
2
1 Star
5

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Shawn Samples
Works great!
Excellent quality!
Scritto da: John T. Ertz
Good inexpensive check valve for a home shop compressor
Bought two of these as I have twin air compressors plumbed into one air line and they have been in use for well over a year now with no issues.
Scritto da: Kenneth Alexander
The ball and spring came out in my air line.
Didn't work but a day. Probably just a defective one that slipped through. I bought 2 and the bigger one is working great.
Scritto da: David Le
Must have when retro fitting portable air compressors to a three-way manifold
A lot of people go off road camping and buy portable air compressors. It is now a trend to retrofit them with a pressure switch and manifold so that you can run traditional air fittings and inflator. But too many people overlook this check valve because without it quite a large number of compressors tend to leak back to the Head because they were not meant to be perfectly airtight. This will resolve the problem with leaky portable compressors and will hold the pressure from leak back.
Scritto da: marty lappin
Works well for the price
I’ve used this in a few places before for air control, this time was a slightly different application. This time I used it as a fuel check valve in top of my fuel tank for a diesel standby generator I’ve refurbished. Fuel was flowing back into the tank on its own if it sat long enough which led to a long prime time. I removed the inner spring with a o-ring pick and installed so gravity closes the check valve. So far is working perfectly for that.
Scritto da: Brad
Does what I needed
Works well and provides a full stop back-flow gate with no detectable leakage.
Scritto da: rockie
Solid built
Haven't used it yet but seems like it's quality built
Scritto da: Kindle Customer
Perfect for use on my remote aux air tank.
Just what I needed for a fill port on my 40 gallon auxiliary tank for my air compressor. I built an remote aux air tank out of an old gas water heater tank to use as a secondary remote tank for my 4hp air compressor. Fitted the tank with regulator, dryer, oilier, safety valve, tank gauge & regulator gauge, dump valve for water drainage, and needed to make a fill port. I was using a small manual valve which soon became a PITA having to remember to open and close it when filling. My old original tank on the compressor leaks, so wanted to be able to shut the aux tank off also so it wouldn't bleed back through the leaky original tank. So, I chose this check valve to replace the manual fill valve. Works very well, and was sufficiently fast enough to fill the 40 gal aux tank. Filled it from zero to 110 psi in about 5 minutes, so that is good enough for me. Seems to hold well for now. Seems to be well made.

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array