Anderson Metals 56101-04 Messingrohrverschraubung, T-Stück aus Stangenmaterial, 1/4 x 1/4 x 1/4 NPT Innengewinde

Name: Anderson Metals 56101-04 Messingrohrverschraubung, T-Stück aus Stangenmaterial, 1/4 x 1/4 x 1/4 NPT Innengewinde
Brand: Anderson Metals
SKU: 0719852935728
Price: 27.94 EUR
Availability: InStock

Brand:Anderson Metals

3.9/5

€
27.94

Dieses Anderson Metals 56101 T-Stück aus Stangenmaterial ist ein Messingrohranschlussstück mit 1/4 NPT-Innengewinde. Das T-Stück ist T-förmig und verfügt über drei Öffnungen zum Verbinden und Abzweigen von drei Rohren, zwei auf der Hauptstrecke und eine Abzweigung im 90-Grad-Winkel von der Mitte des T-Stücks. Die Rohrabmessungen für T-Stücke werden als A x B x C dargestellt. A und B geben die Hauptstrecke des Fittings an, und C gibt die Abzweigung an. Es verfügt über NPT-Innengewinde (National Pipe Taper) zum Anschluss an Rohre mit Außengewinde und sorgt so für eine dichtere Abdichtung als gerade Gewinde. Diese Armatur besteht aus Messing für Korrosionsbeständigkeit, Duktilität bei hohen Temperaturen und geringe magnetische Permeabilität. Messing kann mit Kupfer, Messing, Kunststoff, Aluminium und geschweißtem Stahl verbunden werden. Die Armatur hat einen Betriebstemperaturbereich von -65 bis +250 Grad F. Diese Armatur erfüllt die Qualitätsspezifikationen B584 der American Society for Testing and Materials (ASTM) und B16 der American Society of Mechanical Engineers (ASME)/American National Standards Institute (ANSI). Assurance.Rohrverbindungsstücke sind Komponenten, die zum Verbinden, Abschließen, Steuern des Durchflusses und zum Ändern der Richtung von Rohrleitungen in vielen verschiedenen Branchen verwendet werden. Berücksichtigen Sie beim Kauf von Rohrverbindungsstücken die Anwendung, da diese sich auf Materialtyp, Form, Größe und erforderliche Haltbarkeit auswirkt. Fittings sind mit oder ohne Gewinde in vielen Formen, Stilen, Größen und Zeitplänen (Rohrwandstärke) erhältlich. Anderson Metals stellt Messingfittings, Ventile und Rohrnippel her. Das 1951 gegründete Unternehmen hat seinen Hauptsitz in Kansas City, MO.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0719852935728

Kategorien Industrie & Wissenschaft, Hydraulik, Pneumatik & Sanitär, Verschraubungen, Rohrarmaturen,

Diese Armaturen enthalten Blei und dürfen laut Bundesgesetz nicht für die Trinkwassernutzung in den USA und ihren Territorien installiert werden. Erfüllt die ASTM B584-Standards für Qualitätssicherung und die technischen Spezifikationen ASME/ASMI B16. Betriebstemperaturbereich von -65 bis +250 Grad F. Messing für Korrosionsbeständigkeit, Duktilität bei hohen Temperaturen und geringe magnetische Permeabilität. NPT-Innengewinde zum Anschluss an Rohre mit Außengewinde. T-Stück mit drei Öffnungen zum Verbinden und Abzweigen von drei Rohren.

Brand	Anderson Metals
Color	Brass
Connector Type	NPT Female
Country of Origin	China
Domestic Shipping	Item can be shipped within U.S.
Exterior Finish	Brass
International Shipping	This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	1.5 x 1.1 x 0.7 inches
Item model number	56101-04
Manufacturer	Anderson Metals
Material	Brass
Number of Pieces	1
Product Dimensions	1.5 x 1.1 x 0.7 inches; 2.4 Ounces
Size	0.25 Inch
Thread Type	NPT

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Jman

Solid brass T

Great solid product, properly threaded, used with thread tape and hasn’t leaked.

Scritto da: Charles W.

Nice Brass 1/4 NPT Tee

I agree with other reviewers who have stated that the picture is not accurate. The fitting is turned down to a round pipe-like end on all three arms of the T - unlike what the picture shows. I deducted one star from the review for the inaccurate and misleading picture. In terms of functionality, in most cases this will not affect the use of the fitting. These are brass 1/4 NPT fittings not 2” steel fittings - You do not crank away with all your strength with your biggest monkey wrench to make the fitting leak-tight. Personally I use Teflon thread tape on the threads, some people use thread goo of some type to make the fittings absolutely leak-tight. In any case, brass fittings are generally more accurately manufactured and turned so they do not require as much pressure in tightening the fittings as larger galvanized iron fittings. I found the fitting to be exactly what it is - a 1/4 NPT brass Tee, female all three ends. The Threads seem accurately made and fit exactly with my male 1/4 NPT pipe fittings. By the way 1/4 NPT is the size frequently used on compressed air fittings in the USA. The 1/4” refers to the nominal inside diameter of the pipe. The diameter of the threaded hole is obviously larger.

Scritto da: L. Ball

Worked Well, Used on Smittybilt Compressor

I modified my Smittybilt compressor so it shuts off when not being used. Was a great add and really assisted in functionality. The only downfall is the supplied soft case no longer works. So Im shopping for a new option. You cannot see the actual pressure switch because I used a piece of kydex to cover and protect.

Scritto da: TolkienFan

Excellent, Strong Tee

I really like Anderson's brass fittings.... And this one is certainly one of the best. This barstock tee is extremely strong and well made. I found the threads to be well formed and well within the "standard" for size. They felt extremely "smooth" going together and all appropriately sized fittings mated up perfectly without bottoming or leaking. The sidewalls are strong and allow for a good gipping surface for tightening and retention in place without danger of damage or collapse of the fitting due to tool pressure. I don't believe there is a better product on the market for it's intended usage. Five (5) stars for a great product at a reasonable price. While in the process of a project, I purchased several of these tees in different sizes and configurations....this is one of them. I have posted a substantially similar review for each of the tees I purchased....

Scritto da: H. Stewart

Works well, not a showroom piece

Good quality, except it had a minuscule thread defect, I’d have guessed the threading operation stopped and restarted because there was a line following the contour of the threads in one hole. Doesn’t leak so I’ll rate it high. Has somewhat of a banged up finish, minor dings and dents, none larger than a sixteenth of an inch wide nor deep. But it works fine. I’m using it to rebuild a 6 gallon air compressor valve system.

Scritto da: Steven Pierce

25% off them had threads cut too deep that I couldn't get a seal with teflon tape or thread sealant

3 of the four worked as expected but couldn't finish project on time because I had to re order to replace one that had its threads cut too deep and I couldn't get a proper seal. I did have this in a system on a Nitrogen bottle where it was subject to 2500psi. May have been good enough for less pressure.

Scritto da: Mr. TP

Worked well

Fit my application fine

Scritto da: NottaReviewer

Works like it should, thanks.

Use this along with a few other parts to make a pressure gauge to test my PC water cooling system for leaks. Just as described and works great

Scritto da: Matthew12222

Completely great functional part.

I used the part to rebuild an air compressor The threads looked fine and sealed well. The exterior finish was rough, but I didn't buy it for beauty.. It would be easy to polish if someone needed to. Love the square billet easy to hold with a wrench. I received the parts in the image.

Scritto da: fred w.

Tee fitting

As described

Scritto da: Cycler

Very good

Very good!