Yost Tools YPCY34 3/4 Rohrschelle 3/4 Zoll

Brand:Yost Vises

3.6/5

55.24

Fanimation nimmt die Bedürfnisse seiner Kunden ernst und bietet daher gerne eine umfangreiche Auswahl an Zubehör mit verschiedenen Ausführungen an, um für jedes Produkt und jedes Zuhause die perfekte Passform zu bieten. 60-Zoll-Klinge: Knopfholz, verwittertes Holz, 5er-Set

Keine Einheiten verfügbar
GARANTIE: Kommt mit einer einjährigen eingeschränkten Garantie und einer 90-tägigen Rückgabefrist. SICHERHEITSHINWEISE: Der Missbrauch von Schraubstöcken kann zu schweren Verletzungen an Augen, Händen und/oder anderen Körperteilen führen. Schraubstöcke müssen ordnungsgemäß aufgestellt und verwendet werden. Lesen, verstehen und befolgen Sie vor der Einrichtung und Verwendung alle Anweisungen im Handbuch. YOST VISES-QUALITÄT: Jedes Yost Vises-Werkzeug ist so konstruiert, dass es hohe Standards an Qualität, Festigkeit und Haltbarkeit erfüllt. Wir legen Wert auf Qualität statt auf Quantität und stellen Produkte her, die sicher und einfach zu verwenden sind. Zur Unterstützung unserer Qualitätsgarantie bieten wir lebenslangen technischen Support. ANWENDUNG: Rohrschellen eignen sich perfekt zum Spannen von Materialien unterschiedlicher Größe. Mit Rohrschellen kann die maximale Größe durch den Zukauf kostengünstiger Rohrlängen erhöht werden. Rohrschellen haben H-förmige Beine für Stabilität, Rohrschelle und H-förmiger Fuß sorgen für Stabilität. Sie klemmen in zwei Dimensionen und sorgen so für zweiachsige Stabilität. BESTE VERWENDUNG: Rohrschellen sind ein unverzichtbares Zubehör für vielfältige Metall- und Holzbearbeitungsprojekte. Die glatte, zentimetergroße Backenfläche aus Eisen ermöglicht einen starken Halt auf einer Vielzahl von Materialien, ohne dass es zu Beschädigungen kommt. TECHNISCHE DATEN: Klemmt Rohre mit einem Durchmesser von 3/4 Zoll (1,905 cm); Klemmbacken 1-1/2 (3,81 cm) hoch; Es befindet sich 6,35 cm (2 1/2 Zoll) über der Arbeitsfläche. PRO-ROHRSCHELLEN: Die Rohrschelle YPCY35 von Yost Tools ist mit jedem schwarzen Rohr mit einem Durchmesser von 3/4 Zoll (1,905 cm) kompatibel, bei dem beide Enden mit einem Gewinde versehen sind. Machen Sie die Handhabung von Materialien in der Holz- oder Metallbearbeitung mit dieser Rohrschelle von Yost Tools zu einer freihändigen Arbeit. Die Schraube aus gehärtetem Stahl und das solide Gusseisendesign sorgen dafür, dass Ihre Rohre nirgendwohin führen, sobald sie an Ort und Stelle sind.
Brand Yost Vises
Color Blue,black
Country of Origin China
Item model number YPC-Y34
Item Weight 0.1 Kilograms
Manufacturer Yost Vises -
Material Cast Iron
Package Dimensions 7.1 x 5.3 x 2.3 inches; 3.53 Ounces
Style Industrial

3.6

13 Review
5 Star
73
4 Star
15
3 Star
7
2 Star
3
1 Star
3

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Amazon Customer
Yost copies the best
Across the board, Yost seems to specialize in using Chinese manufacturing to copy the best older products: things like Eclipse and Jorgensen quick-release vises and Jorgensen/Pony pipe clamps. In some cases the original manufacturer still makes the product but they also moved to China. I have 10 of these pipe clamps and they work great. Many others are more expensive but not any better, and the truly better ones cost a lot more. Don't buy long pipes for these. Buy 2-3 foot pipes to cover 99% of your clamping needs. When you really need long clamps, buy threaded pipe couplers and put your pipes together!
Scritto da: A. Chustz
Life time tool.
Just add threaded pipe and wa-la! Great clamp for wide peices.
Scritto da: J. C. Bones
Very impressed for the price! Almost 30% less than the Ponys.
I Have been a professional woodworker for almost 40 years and have found the Yost 1/2" pipe clamp to be every bit as reliable in strength, function, and articulation as the Pony/Jorgensen model. These clamps are almost identical in appearance from the castings, to the three plate clutch on the tail section, to the acme threads and the sliding "vise style" t-bar tensioning handle. There may have been issues in the past with imagery but, I received exactly what was pictured. The 1/2" have the slider bar handle and the 3/4" have the cast handle, same as the Pony clamps. I purchased eight clamps and had no issues with mis-threaded ends. If your new to woodworking DO NOT apply grease to the threads, as one reviewer had suggested, as it ends up all over you and your project. It will also attract dust which causes binding, the grease will cause more harm than good. With performance and appearance being equal to the Pony clamps, I would much rather have four of Yost clamps than three of Ponies for the same money any day of the week. Great performance and great value these are the way to go.
Scritto da: Terrence Walsh
Good clamp. How to save money on pipe.
Clamp head mounted easily on threaded end of 3/4-inch black pipe. Slider end mounted easily and stayed put. These Yost pipe clamps seem to be as good as some Irwin pipe clamps I've had for years. They provide versatility because they can be moved from short pipes to long pipes depending on what you're doing. You only need one threaded end on the pipe since the slider part needs no threads. To save money on pipe, buy a long piece that is threaded on both ends. Cut in two pieces. That gives you pipe for two clamps. Around here the cost per foot of a 10-foot length of pipe is slightly less than half the cost per foot of a 4-foot piece. Consider putting a crutch tip on the unthreaded end. This should reduce slipping and falling when stood on end. It also reduces the chance of a puncture wound if the open end falls on someone or someone falls on the open end.
Scritto da: Jim from Florida
Get them, they are great!
These clamps are super strong and well built. They hold more pressure than the average woodworker will ever need and they are useable in several different ways for sure. It is true that the handles for the 1/2in are a different design than the pictures show. The 3/4in are just like the one in the pictures. I bought both sizes and to be honest I'm not sure if I'll ever really have a need for clamps as strong as the 3/4in. Heck, the 1/2in are kind of overkill. I really think they can exert enough pressure to bend an average bar clamp in half. I'd never used pipe clamps before these. When mine came in I put some bearing grease on the threads and put them to work right away on 36in bars. Overall I'm very impressed with these clamps (both sizes) and Yost is the one to stick with if you're a garage woodworker. I'll be getting several more sets! You cannot argue with the price.
Scritto da: Cathy Hatchel
Ok
Only purchased these because Amazon limits purchase of Bessey pipe clamps to five, and I needed to create two sets for a glue up project on short notice. Side by side, no comparison between the two. If I never used or had Bessey might be different. Spend a couple dollars more and get the Red ones! These will be relegated to short clamp up use in the future.
Scritto da: Robert Buchholz
One little flaw
I cannot find the 1/2" Jorgensen clamps anywhere so I am looking for a suitable substitute. This came close but a cheap brass or some soft metal pin that holds the screw to the moving clamp keeps this one from being the one. The pin broke the first time I tightened it so now it is a three piece clamp that has to be put back together every time I use it. The holding power is as good as the Jorgensen and I will continue to use it but still looking for a suitable substitute.
Scritto da: Part French
I'd recommend a better design
The clamps are strong but are not really designed for the user. I needed 2 pair to use once so no big deal. If you are going to use these every day, I'd recommend a better design. These have very short clamping metal pads where they touch the work. Turn style does not have an ability to slide the part you actually turn. The old style has a hole you can push the turn style through when you are in a tight spot, this one is very limiting. The actual screw threads on the bolt part are spaced far apart which means you must use more force than if the threads were fine. There is more resistance with these screw threads because it tightens faster per turn. I would not buy if I had a lot of work to do with them.
Scritto da: Juan Ramon P.
Sirven pero no son muy buenas
Son útiles pero no de uso rudo ni muy duraderas, compre 3. Una de ellas se le zafó el remache que sostiene la placa superior apenas después de un mes de uso, otra funciona bien y la tercera al apretar empuja disparejo así que necesito usar un pedazo de madera grueso para que distribuya la fuerza del empuje más parejo
Scritto da: Edgar Eduardo Hernández González
Difícil encontrar las barras
no les recomiendo este producto, dado que los tubos de media pulgada, aun los de cédula gruesa, quedan muy holgados en orificios. los tubos de1/2" quedan muy pequeños, mientras que los de 3/4", quedan exactos, pero la rosca queda pequeña. por lo que respecta al material, si se ve resistente.
Scritto da: Ivan
Regular
El producto es robusto pero de las 4 piezas que compré, una estaba barrida. Otro punto negativo es que el clutch viene mas abajo de los soportes así que no permite apoyar dichos soportes en una superficie
Scritto da: Matt
Great clamps
These are great clamps. I like the 3/4” over the 1/2” because they are more rigid. I have 6 of these and they are great. Also, they work out to be less than 1/2 the cost of the Besseys even after buying the pipe.
Scritto da: aeos
Muy bueno
Perfectas y de muy buena calidad, compras el tubo del tamaño deseado y tienes tu prensa

Verwandte Produkte

hot
Malco 2DH Rohr- und Kanalhalter
3.6/5

€ 73.87

Malco 2DH Rohr- und Kanalhalter
3.6/5

€ 73.87

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array