Tragbarer Werkzeugkasten – Aufbewahrungsfächer für Werkzeuge, Teile, Bastelbedarf oder Tackle von Stalwart – Freischwinger-Werkzeugkasten, Schwarz/Gelb, Freischwinger-Werkzeugkasten

Brand:Stalwart

3.3/5

112.34

Die tragbare Werkzeugkiste von Stalwart ist die One-Spot-Aufbewahrungslösung, nach der Sie gesucht haben. Dieser freitragende Werkzeugkasten lässt sich öffnen und bietet auf drei Ebenen fünf Fächer für einfachen Zugriff, einen praktischen Griff für den Transport und mittlere Schlaufen an den Deckeln zum Anbringen eines Schlosses oder eines Karabinerhakens. Die erste Ebene der Tabletts verfügt über durchsichtige Schnappdeckel, auf die zugegriffen werden kann, ohne dass die gesamte Box geöffnet werden muss, während die untere Ebene über einen großen Aufbewahrungsbereich verfügt, der sich perfekt für die Aufbewahrung größerer Gegenstände wie Werkzeuge eignet – hier findet alles Platz, was Sie zum Organisieren benötigen. Es handelt sich um einen tragbaren Mehrzweck-Werkzeugkasten, der sich perfekt für alles eignet, von Werkzeugen, Hardware wie Nägeln, Schrauben und Bolzen bis hin zu Angelgeräten, Perlen, Schmuck sowie Hobby- und Bastelbedarf.

PRODUKTDETAILS – Material: PE-Kunststoff und Stahl. Abmessungen: (L) 18 x (B) 8,25 x (H) 11,8 Zoll. Obere Ablage: (L) 14,8 x (B) 3,5 x (H) 2; Mittleres Tablett: (L) 15,9 x (B) 3,5 x (H) 1,8; Basisbehälter: (L) 16,2 Zoll x (B) 7,9 Zoll x (H) 3,7 Zoll. Farbe Gelb. MEHRZWECK - Dieser ausgezeichnete Mehrzweck-Aufbewahrungskoffer eignet sich perfekt für alles, von Werkzeugen, Hardware wie Nägeln, Schrauben und Bolzen bis hin zu Angelgeräten, Perlen, Schmuck und Bastelbedarf! Es ist die One-Spot-Speicherlösung, nach der Sie gesucht haben! TRAGBAR – Mit praktischen Tragegriffen ist dieser 18 Zoll lange, große Werkzeugkasten leicht zu transportieren und reisefreundlich. Befestigen Sie an den Schlaufen der durchsichtigen Kunststoffdeckel ein Schloss oder einen Karabinerhaken, um zu verhindern, dass sich die Utility-Box öffnet und der Inhalt gesichert ist. LANGLEBIG – Diese aus robustem Kunststoff gefertigte Hülle ist eine langlebige Option für alle Ihre Aufbewahrungsbedürfnisse. Das Treppenstufendesign des Werkzeugkastens mit 3 Schubladen verteilt das Gewicht gleichmäßig und sorgt so für Stabilität, sodass er im vollständig geöffneten Zustand nicht umkippt. 3-STUFIGER WERKZEUGKASTEN – Dieser freitragende Werkzeugkasten lässt sich öffnen und bietet 5 Fächer auf 3 Ebenen, einschließlich eines großen Aufbewahrungsbereichs, der sich perfekt für größere Gegenstände eignet. Die obere Tablettebene verfügt über durchsichtige Deckel für einfachen Zugriff, ohne die gesamte Box öffnen zu müssen.
Batteries Required? ‎No
Brand Stalwart
Brand ‎Stalwart
Color Black/Yellow
Color ‎Black/Yellow
Customer Reviews 4.2 4.2 out of 5 stars 200 ratings 4.2 out of 5 stars
Included Components ‎Tool Box
Item model number ‎75-3082A
Item Package Quantity ‎1
Item Weight ‎8.05 pounds
Manufacturer ‎Trademark GLB
Material Plastic
Material ‎Plastic
Number of Compartments ‎5
Part Number ‎75-3082A
Pattern ‎Tool Box
Product Dimensions 18"L x 11.8"W x 8.25"H
Product Dimensions ‎18 x 11.8 x 8.25 inches
Product Dimensions ‎18"L x 11.8"W x 8.25"H
Shape ‎Rectangular
Size ‎18"
Style ‎Cantilever Toolbox
Water Resistance Level Water Repellent
Water Resistance Level ‎Water Repellent

3.3

10 Review
5 Star
63
4 Star
17
3 Star
7
2 Star
4
1 Star
10

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: dcfw
Seems well made
My aunt loves to crossstitch, and is good at losing track of her embroidery thread supply. I wanted something to keep it organized and in one place. I tried a stacking plastic organizer box, but felt that she would have trouble aligning and latching the layers with the one I purchased. With this, every layer is attached together, and opens easily with the handles. It is fairly lightweight for a toolbox, but fairly heavy for a sewing box. Only wish it opened a little wider so the layers don't overlap when it's fully open. It might be difficult to access the rows of thread towards the outside in the middle and bottom layers. I do like the clear plastic covers on the top drawers.
Scritto da: WGonz
Nice but note very sturdy
The plastic Clips that hold the small trays broke very easily and quickly. As a result, if I lift to open the tool box to quickly the tray (s) will pop out from the bracket that should be holding them securely if the clips hadn't broken.
Scritto da: Joey
Look everywhere for this, it's exactly what I need... BUT it is cheaply made. dealbreaker? no.
I looked high and low for a cantiliver box like this, this is it. it is as pictured. It's extremely cheaply built, and it does fall over on it's own weight if you don't open both sides at the same time. It wiggles and twists, and i wouldn't recommend for serious contractor usage. That said, we're just using it to store hand tools at home, so it's perfect for that. note - due to the very small clearances when the flaps are opened, you can't actually get that big of items inside it. we had hoped to store bit driver sets and drill bit sets, no go - all of the boxes were too wide, to tall, or if they did fit it wouldn't close with them inside. I wish they made a slightly larger model, and I REALLY wish they made a stronger model. I'd pay. Would I buy again? Absolutely.
Scritto da: Christian V.
More than adequate.
This box is very nice. It’s plastic/metal construction makes it sturdy and functional. All compartments open nicely and accesible. I like the transparent lid top to be able to see at a glance my most frequently use tools in the top compartments. My only caveat is the only way to properly open the top lid is to erect the carry handle bar. If the bar is in the flat position, you won’t be able to open the lid. It’s either that or you have to slide over the entire double compartment side to open the top lid. To me it’s not too much of a nuisance but that’s why I gave it 4 out of 5 stars. All in all I like it and I might consider getting a second. At least for sure if I find one in a diferente color.
Scritto da: Samurai Dave
Very sturdy. High quality.
This is the same toolbox that was made by Stanley under the FatMax brand name. The only thing that has changed is the color is yellow instead of silver. When Stanley stopped offering them, I tried to find a replacement, but nothing came close. Plastic tackle boxes are too light weight for my needs. When I saw this toolbox, it looked very familiar, so I order one to confirm it was an equivalent to the FatMax. I'm happy to report it is! :-D I use one for welding torch supplies, another for airbrush components, and yet another for carrying small tools. Very rugged and reliable. Really like to be able to open it up and see everything at once, instead of pulling out drawers. The clear plastic lids help me know which side to open to quickly find what I need. I will certainly be buying more.
Scritto da: K. Berggren
A little smaller than I thought, but very sturdy
Metal is a little lighter than I though it would be, but I used it as a wax box for my ski team and the open/close mechanism is very smooth, easy to see everything in the toolbox at once without losing anything in the bottom. Very satisfied. wish they made it in a slightly larger version.
Scritto da: Amazon Surfer
Works for organizing light weight tools
I bought this toolbox to organize all my knife sharpening gear. For my use it seems to be perfect. The black colored sides are plastic, the body, trays, and handles are metal. The rivets that hold the trays to the sides are plastic. I would not use this toolbox for heavy tools. It seems great for organizing hobby type items.
Scritto da: Larry C.
Great find for Dremel and Exacto tools!
This box held all my Dremel accessories, Dremel tool and a large Exacto knife kit with accessories. I am very pleased with the purchase and would recommend this as a great way to store these items. The lock feature is okay and does the job. That being said, if anyone's wanted to, they could just snap the plastic lid open. I found it sturdy enough for me.
Scritto da: Josh
Love these.
Sturdy, good price, can't complain. Only suggestion I do have is make sure the hinge fasteners are put in before it leaves the factory!! I had to put nuts and bolts in some because they were missing. Probably stronger anyway. I bought 3 so far
Scritto da: Barbara
Pretty and sturdy but super heavy
I like the internal size though.

Verwandte Produkte

hot
RCBS Case Master-Messgerät
3.4/5

€ 200.72

RCBS Case Master-Messgerät
3.4/5

€ 200.72

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array