Tekonsha 118554 T-One-Steckerbaugruppe mit verbessertem schaltkreisgeschütztem ModuLite HD-Modul

Brand:Tekonsha

3.6/5

117.08

Merkmale der Spritzpistole: Erreichen Sie neue Höhen mit der verstellbaren Blitzspritzpistole der Serie Universal 2200 von Valley Industries mit austauschbaren Düsen. Diese schnell zu greifende Einhand-Spritzpistole kann bis zu 400 PSI und 5,5 GPM verarbeiten. Ausgestattet mit einem Daumenhebel an der Seite der Spritzpistole, der von einem gleichmäßigen Strahl zu einem großflächigen, zerstäubten Nebel wechselt. Verhindern Sie unerwünschte Chemikalien mit der tropffreien Absperrung am Ende des Fasses. Minimieren Sie unnötige Ausfallzeiten, da diese Spritzpistole vor Ort repariert werden kann. Verfügt über eine Abzugssperre, um Ermüdungserscheinungen zu reduzieren und den Bedienerkomfort zu erhöhen. Enthält einen 3/8″- und 1/2″-Schlauchtüllenanschluss für eine einfache Montage. Nicht zur Verwendung mit Hochdruckreinigern geeignet. Austauschbare Düsen: Wenn sich die Anwendungen ändern, können Sie einfach zwischen den mitgelieferten Düsen wechseln. Düse mit 1,5 Öffnungen für Pumpen mit 1,0–2,2 GPM. Düse mit 2,0 Öffnungen für Pumpen mit 2,4–4,0 GPM. Düse mit 2,5 Öffnungen für Pumpen mit 4,5–5,5 GPM. Reichweite: Sprühen Sie je nach Größe der verwendeten Membranpumpe bis zu 35 Fuß vertikal und 45 Fuß horizontal . Perfekt für großvolumiges Punktsprühen in Obstgärten, Weinbergen, Baumschulen, hohen Bäumen und bei Nutztieren.

Einfache, leicht verständliche Do-it-yourself-Anweisungen in jedem Paket enthalten; Für die Installation sind keine Spezialwerkzeuge erforderlich. 16-Gauge-Bonddraht mit 4-Flachstecker und Kappe; 4,2 Ampere Bremslicht-/Blinkerstromkreiskapazität; 7,5 Ampere Rücklichtstromkreiskapazität; Verbessertes, schaltkreisgeschütztes ModuLite HD-Modul. Wetterfeste, einteilige Konstruktion und ein „Werks“-Erscheinungsbild – T-One-Stecker sehen aus wie ein Teil des Werkskabelbaums und können bei Nichtgebrauch einfach im Laderaum oder unter der hinteren Stoßstange verstaut werden. T-One-Anhängerkupplungskabelbaumanschlüsse erfordern kein Spleißen von Fahrzeugkabeln. Suchen Sie einfach den Kabelbaumstecker Ihres Fahrzeugs, ziehen Sie die Verbindung ab und stecken Sie den T-One-Stecker in den Kabelbaum des Fahrzeugs.
Brand Tekonsha
Brand ‎Tekonsha
Customer Reviews 4.6 4.6 out of 5 stars 164 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 5.5 x 3.75 x 9 inches
Item model number ‎118554
Item Weight 1 Pounds
Item Weight ‎1 pounds
Manufacturer ‎Tekonsha
Manufacturer Part Number ‎118554
Material Copper
OEM Part Number ‎118554
Product Dimensions ‎5.5 x 3.75 x 9 inches

3.6

8 Review
5 Star
80
4 Star
11
3 Star
3
2 Star
3
1 Star
3

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Halthor
Works great
Installed on a 2008 Jeep Liberty, very easy to install. Except the wire that needed to be run from the rear bumper to the battery. It has to be threaded through part of the frame and zip tied to some of the other stuff underneath the vehicle, this was the most time consuming. The wires connected to the taillights we’re easily installed which took about fifteen minutes and that included removing the taillights.
Scritto da: Kshopper
Fits inside the left rear taillight housing.
Lots of fusing around to get it into the tail light housing. I guess the wiring could be longer and better thought out. It does work well. If your not patient, I suggest you have an installer.
Scritto da: crazylare
Easy trailer lights
The trailer light kit was fairly simple to install. The hardest part is running the power wire from the back to the front. Not easy to do on Jeep Liberty's. Other than the power wire the rest was really easy. I hope that it lasts a good long time.
Scritto da: Kev in Montrose
Everything fits and functions as it should.
The included instructions were good about everything that I had to do at the rear of my vehicle. Rather vague about how to get the power wire from the left rear corner to the battery at the left front corner. This was the only difficult part of the installation as it requires you to lift the vehicle high enough to crawl under it from the front to the back.
Scritto da: Matt
Easy To Install
I installed this on my 2008 Jeep Liberty. It took me about 45mins. My only recommendations are to watch a youtube how-to video, and acquire a rather large pair of wire crimpers or channel locks. The wire connections included are rather heavy duty and I struggled to seat them properly with regular sized pliers. I ran the black power cable from the battery through the driver side undercarriage frame and back to the control unit. The package included plenty of zip ties for the job.
Scritto da: GFleck
Much better then the curt it replaced
went through two curt models and they each lasted about a year, hopefully this one will last longer. installation was simple and worked the first time, will update after a few months of service
Scritto da: Grendel
Works fine.
Works great and includes everything you need to install.
Scritto da: R. Hageman
Piece of cake!
I own a 2010 Jeep Liberty and had this installed in under 30 minutes with minimal effort. The hardest thing is running the power wire from the battery to the back because you have to hide it and secure it. Otherwise this is great. It's plug and play. There is a YouTube video that shows how to get the back of the Liberty apart for the install of a wiring harness. It's not this particular one but it's the same concept and will help tons if you view it before you start. It's dead on accurate and shows you exactly what to do.

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array