Swingline 2-Loch-Locher, Locher, hohe Kapazität, 100 Blatt Lochkapazität, feste Zentren, Schwarz (74190) 2-Loch – 100 Blatt

Brand:Swingline

2.7/5

171.79

Der Swingline Heavy Duty 2-Loch-Stanzer ist robust gebaut und eignet sich für den häufigen Gebrauch und das Lochen großer Mengen an Papier. Ein breiter Griff sorgt für eine einfache Handhabung und lässt sich in der unteren Position verriegeln, um eine kompakte Aufbewahrung auf kleinem Raum zu ermöglichen. Dieser Locher ist für größere Arbeiten geeignet und schneidet saubere 9/32-Zoll-Löcher in bis zu 100 Blatt Papier. Feste Spitzen und Stanzköpfe sorgen für perfekt ausgerichtete Stanzungen. Auch die verstellbare Führung trägt zur Genauigkeit bei. Ein herausnehmbares Tablett fängt die gestanzten Löcher auf, um Ihren Arbeitsplatz sauber zu halten. Das Ersatzset (A7074889) enthält 2 Stanzköpfe und 2 Scheiben (separat erhältlich). Swingline setzt auf diese Qualität.

AUSTAUSCHKIT – Das praktische Ersatzset (A7074889) enthält 2 Stanzköpfe und 2 Scheiben. Einfach zu installieren. Separat erhältlich. WENIGER UNORDNUNG – Der abnehmbare Boden fängt gestanzte Papierreste auf und erleichtert so die Reinigung. Leeren Sie ihn einfach über einen Abfallkorb, wenn er voll ist. PERFEKTE AUSRICHTUNG – Feste Zentren und Stanzköpfe sorgen für eine genaue Ausrichtung der Stanzen. Die verstellbare Führung hilft auch bei der genauen Ausrichtung. 100-BLATT-KAPAZITÄT – Der starke Locher schneidet mühelos große Papierstapel und schneidet bis zu 100 Blatt Papier auf einmal. Erstellt präzise 9/32-Zoll-Löcher. BREITER GRIFF – Der breite Griff ermöglicht eine bequeme Nutzung und rastet in geschlossener Position ein, um eine einfache Aufbewahrung zu ermöglichen. HOHE KAPAZITÄTSEFFIZIENZ – Die langlebige, robuste 2-Loch-Handstanze sorgt für höhere Produktivität bei Stanzarbeiten mit hohem Volumen. Die robuste Metallkonstruktion sorgt für eine lange Produktlebensdauer.
Brand Swingline
Brand ‎Swingline
Color Black
Color ‎Black
Customer Reviews 3.7 3.7 out of 5 stars 32 ratings 3.7 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 11.4 x 5.6 x 5.6 inches
Item Dimensions LxWxH ‎11.4 x 5.6 x 5.6 inches
Item model number ‎A7074190
Item Weight 0.45 Pounds
Item Weight ‎0.45 Pounds
Item Weight ‎7.2 ounces
Manufacturer ‎ACCO Brands
Manufacturer Part Number ‎A7074190
Material Metal
Material ‎Metal
Material Type ‎Metal
Number of Holes ‎2
Number of Items ‎1
Operation Mode ‎Manual
Product Dimensions ‎11.4 x 5.6 x 5.6 inches
Sheet Count ‎100
Size ‎2 Hole

2.7

9 Review
5 Star
47
4 Star
16
3 Star
10
2 Star
12
1 Star
15

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Bill Ross
Works?
Arrived with a cracked base but it technically works. The holes pop out and go all over the place - don't stay in the tray.
Scritto da: Elliot
Works but far from great and needs to be R&D'd a bit more.
For my federal civilian job, we ordered 6 of these bad boys. We punch a LOT of paper in my particular office so it seemed like a good idea to get punchers that could go through 200-300 pages at a time. The good: -They actually go through the advertised amount of pages -Easy to use (once you get used to it) -Doesn't require a lot of force to use (I'd estimate around 15 - 20 pounds?) The bad: -There are inherent design flaws *The 'trap' for the punched paper on the back doesn't fit well. If it's not perfectly on there, paper circles will be all over the desk. Be sure to attach it fully to avoid frustration and check it often. It easily pops loose. *There isn't enough of a positive 'lock' for the 'paper alignment guide'. It's easy to knock it out of place and not realize it. *When maxing out the equipment with the full ~300 sheets, it's difficult to slide the paper in. Not because it's too tight but because the metal bits at the top get in the way. Just seems like there could have been min-ramps built in? -There are obvious tolerance issues that are consistent with multiple units. After using each unit for a month or two, there's an anomaly that occurs where the right side punch doesn't go through the last 5-10 sheets of paper. So, something is out of spec, or gets out of spec with moderate usage, by about .04 inches. The label on the bottom says "Made to Swingline standards in Taiwan". So, either Swingline's standards need to be re-evaluated. Or their standards aren't being upheld.
Scritto da: Paul M. Walker
Great for large projects.
Product works as it should. We use these in a business setting to punch holes in card stock and thicker than normal paper. The 3 hole punch has helped us to make a couple of hundred brochure binders with about 100 pages in each without fail and is holding up better than most products we have tried in the past. Would definitely purchase these again in the future
Scritto da: roe
Two Stars
Does not do well with even small stack of paper-very hard to press down and jams up easily-
Scritto da: M
Works GREAT
It went through 100 sheets like butter!
Scritto da: Angie Machelett
Expensive and Cheap and warranty is horrible
Bought this in Sept 2018, for almost $200, for a small office of fewer than 10 people. the base broke when trying to hole punch some papers...... SWINGLINE refuses to do anything about it because it is out of warranty. We have maybe used this thing 20 times in 2 years and for it to break where it did is ridiculous. Do not WASTE your money on this or I would say any of their products. very disappointed
Scritto da: Sandra
Five Stars
A fantastic office item! Works great.
Scritto da: Denise
Five Stars
What we were looking for.
Scritto da: Amazon Customer
Five Stars
5 STAR FOR THIS PRODUCT.

Verwandte Produkte

hot
Malco NHP1R Nagelstanze
3.7/5

€ 87.17

Malco NHP1R Nagelstanze
3.7/5

€ 87.17

hot
Benutzerdefiniertes Farbstanzwerkzeug
3.5/5

€ 116.47

Benutzerdefiniertes Farbstanzwerkzeug
3.5/5

€ 116.47

hot

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array