SharkBite 1/2 PEX-Rohr x 1/2 Zoll FNPT Crimp 90 Grad Drop-Ohr-Winkelstück, Messing-Sanitäranschluss, PEX-Rohr, PE-RT, UC334LFA 1/2 Zoll x 1/2 Zoll

Brand:SharkBite

3.8/5

26.48

Das robuste Design und die handgehämmerten Details des langen Craftsman-Tellers sind von der amerikanischen Arts & Crafts-Bewegung des frühen 20. Jahrhunderts inspiriert und legen Wert auf Handarbeit gegenüber Massenproduktion. Fügen Sie unseren Kristall-Türknauf hinzu, dessen glatte Mitte nahtlos in geriffelte Kanten übergeht, um eine auffällige Kombination zu erzielen. Alle Türknäufe von Nostalgic Warehouse sind für Langlebigkeit und Schönheit auf einer massiven (nicht plattierten) Basis aus geschmiedetem Messing montiert.

TECHNISCHE DATEN: SharkBite-Messingbeschläge weisen eine minimale Arbeitstemperatur von 33 Grad F bei 160 PSI und eine maximale Arbeitstemperatur von 200 Grad F bei 80 PSI auf. VOM PROFIS BEVORZUGT: SharkBite-Werkzeuge und -Beschläge erfüllen die gleichen hohen Standards für gewerbliche und private Sanitäranwendungen und vereinen Haltbarkeit und Benutzerfreundlichkeit; Zertifiziert für den Einsatz in Trinkwasser- und Wasserheizsystemen. LANGLEBIG UND HOHE QUALITÄT: Diese 90-Grad-Winkelverbinder sind aus bleifreiem DZR-Messing gefertigt und sorgen für dauerhafte Zuverlässigkeit. Korrosionsfrei und ohne Kalkablagerungen. KOMPATIBILITÄT: Messing-Crimp-Fallrohrbögen funktionieren gut mit PEX- und PE-RT-Rohren. SHARKBITE MESSING-CRIMP-DROP-EAR-WINKEL: Dieser SharkBite-Messing-Crimp-Drop-Ear-Winkel ist ein Vollstromanschluss, der verwendet wird, um eine 90-Grad-Verbindung zwischen einem PEX-Rohr und einem Gewinderohr mithilfe von Kupfer-Crimpringen oder Edelstahlklemmen herzustellen.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Color Copper
Color ‎Copper
Connector Type Elbow
Connector Type ‎Elbow
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 467 ratings 4.7 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Brass
Exterior Finish ‎Brass
Included Components ‎PEX Brass Drop Ear Elbow
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 5 x 3 x 2 inches
Item Dimensions LxWxH ‎5 x 3 x 2 inches
Item model number ‎UC334LFA
Item Package Quantity ‎1
Item Weight 0.18 Pounds
Item Weight ‎0.18 Pounds
Item Weight ‎2.88 ounces
Manufacturer ‎Cash Acme
Material Stainless Steel
Material ‎Stainless Steel
Measurement System ‎Metric
Number Of Pieces 1
Number Of Pieces ‎1
Part Number ‎UC334LFA
Product Dimensions ‎5 x 3 x 2 inches
Size 1/2-Inch x 1/2-Inch
Size ‎1/2-Inch x 1/2-Inch
Thread Type NPT
Thread Type ‎NPT
Warranty Description ‎Limited 5 Year

3.8

9 Review
5 Star
83
4 Star
12
3 Star
2
2 Star
1
1 Star
1

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: ffox
Good quality
What can i say? It’s brass, it fits to spec, it’s decent quality.
Scritto da: Kat
Did its job connecting shower fixture to pex supply
Did its job connecting shower fixture to pex supply. Easy to install, no stripped threading, and no leaks. I had trouble finding this in the big box stores, and was happy to have a known brand name for the product.
Scritto da: Non Stop Horizon
The easiest way to professionally finish a shower
I used this to connect the pipe (shower arm) that goes to the shower head. I just lined it up with the hole the shower arm was to come out of, marked it with a pencil, then bolted it onto a piece of 2x4 that I connected to the parallel studs on either end. I then screwed the shower arm in place (I used a little plumbing tape to be safe) and connected the pipe (flexible pex pipe) with the proper clamp and that was that really. Along with the Delta hardware I used, this piece is also very quiet. I made sure the pipes for the shower were not in the wall facing the next bedroom because I'm used to loud water flow from other houses I've lived in. This is a shower I built myself selecting all of the parts on my own, so everything (from the Sharkbite PEX pipes, the delta valve and hardware, and this Sharkbite elbow) together makes for a shower than can barely be heard even without the drywall covering it up. In my case, the service wall is the new living room. When the shower is running, it simply cannot be heard in the living room.
Scritto da: Dogs & Horses
Easy install, easy connection to 1/2" PEX
I used this yesterday to set up a shower and had zero problems. My 1/2" PEX connected and clamped with no trouble . Attaching it to the brace was three screws and done. Everything is level and leak free.
Scritto da: SBSeed
the only issue is that there is not (as far as i know) a 1/2 inch connector like this one from PEX to the standard hose connection ...
to start out i want to give this a four star rating because it does everything that it is supposed to do out of the package... the only issue is that there is not (as far as i know) a 1/2 inch connector like this one from PEX to the standard hose connection of 3/4 inch... so you will have to get a converter for another 5 bucks (maybe less depending on what hardware stores you use and the stores location, 5 bucks on amazon as well i think) and possibly a female to female connector as well... works fine, no leaks when properly attached to other brass fittings or to the PEX lines. this saves a TON of money as well as time using PEX and these types of connectors.
Scritto da: Eric
Bathroom remodel need
Worked perfectly with pex
Scritto da: Don
geat
just do the job, like three screw mount
Scritto da: Amazon Customer
Meets needs
Okay
Scritto da: Neal Soltys
Perfect
Worked perfect in the parts washer

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array