PSI Woodworking Products TM32 1/2-Zoll-Bohrfutter mit Morsekegeldorn Nr. 2 (1/2 2MT) 1/2 2MT-Bohrfutter

Brand:PSI Woodworking

3.8/5

78.74

#2 Morsekegelhalterung für Delta-, Jet-, PSI- und andere Midi-Drehmaschinen-Spindelstöcke und Reitstöcke. Ein 3-Backen-Mechanismus mit 1/2 Zoll Durchmesser kann zum Befestigen kleiner Späne oder Stiftdorne am Spindelstock oder eines Bohrers am Reitstock verwendet werden. Nimmt aus Sicherheitsgründen einen 1/4-20-Zugbolzen (nicht im Lieferumfang enthalten) auf. Hält Bohrer mit einem Durchmesser von bis zu 1/2 Zoll. Das im #2 MT montierte Bohrfutter kann sowohl im Spindelstock als auch im Reitstock verwendet werden. Wird mit einem Bohrfutterschlüssel (im Lieferumfang enthalten) festgezogen, um einen hervorragenden Halt zu gewährleisten. Mit einer Ausbrechstange leicht zu entfernen.

Ideal zum Halten von Bohrern, kleinen Spänen, Dübeln, Stiftschäften und vielem mehr. Lässt sich dank der ausbrechbaren Stange leicht entfernen. Der #2MT-Dorn nimmt 1/4 x 20tpi-Zugbolzen auf; Zugbolzen nicht im Lieferumfang enthalten. Dieses 3-Backenfutter lässt sich in den Spindelstock oder Reitstock jeder Drehmaschine montieren, die #2MT-Zubehör akzeptiert. Enthält das 1/2-Bohrfutter, den Morsekegeldorn Nr. 2 und den Backenspannschlüssel.
Batteries Included? ‎No
Batteries Required? ‎No
Brand PSI Woodworking
Color ‎1/2"
Compatible Devices Lathe
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 2,923 ratings 4.7 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Included Components 1/2" Drill Chuck, #2MT Arbor, Chuck Key
Included Components ‎1/2" Drill Chuck, #2MT Arbor, Chuck Key
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎TM32
Item Package Quantity ‎1
Item Weight ‎1.9 pounds
Manufacturer ‎PSI Woodworking
Material Alloy Steel
Material ‎Alloy Steel
Package Dimensions ‎5 x 3 x 2.9 inches
Part Number ‎TM32
Size ‎2MT
Style ‎Chuck
Warranty Description ‎2 Years Under Normal Use

3.8

13 Review
5 Star
79
4 Star
15
3 Star
4
2 Star
1
1 Star
1

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: JED
Must have!
If you need to cut a bowl etc, this is a great tool to get the internal cutting going. Very nicely made and glad to have it.
Scritto da: Melissa&Kermit
Good quality. Performs well.
I am a wood carver and wood turner. This saved me time hollowing out carvings.
Scritto da: Dan Trachtman
fine overal
It does the job but I wish the shaft was made out of a stronger steel, mine is already banged up.
Scritto da: Vitalijus_B
PSI Woodworking Products TM32
ok
Scritto da: Kyle
Solid chuck
Works as advertised. My only real complaint is that it is pretty beefy. I use it on a Wen pen lathe, and probably should have gotten the 3/8 in version. I've had to finagle things to get the chuck and but to fit on the end if the piece is longer (10" or so). But, no stars off for this - mostly I'm just trying to do things on my little lathe that I probably shouldn't! The chuck itself is well built and seems like it will hold up more that adequately for my needs.
Scritto da: MB
Works well enough at this price
Works well enough. The Morse taper is a little too big and doesn't eject from tailstock easily. I have to run tailstock out and tap it out
Scritto da: Gerry M. Smith
Despite Amazon's "guaranteed fit" this will NOT fit the Shop Fox 1704 lathe
Probably a decent chuck. Made in China. I bought it for my benchtop lathe after reading on the lathe description that it was a guaranteed fit. Obviously nobody tried very hard to confirm (including me.) The Shop Fox requires a Morse Taper #1 quill, this chuck has a Morse Taper #2. My loss for trusting Amazon. My only excuse is that there's no brick and mortar store within 100 miles.
Scritto da: Jay
Great product
Nice product! I received it fast and it works just as good as any other chuck I’ve bought.
Scritto da: colin hopkins
So far so good
I use it for drilling a hole in my pen blank on the lathe. Saved me buying a drill press
Scritto da: David Wise
Solid piece, but has a few quirks.
Picked this up to go with my Mastercraft 12 inch lathe. The fact that this arrived with the MT #1 stock not mounted was a bit concerning, but a little gentle persuasion from a small rubber mallet got it properly seated in the chuck. This chuck is quite stiff out of the box, I had trouble rotating it with bare hands when securing a bit. I'm hoping that it will free itself up with further use. It is heavy piece, so if I were to order it again, I would probably go one size smaller for a hobby lathe.
Scritto da: Nate
Its ok, but I expected better
Don't know if it is the unit I got or all are the same, but mine seems to catch when using the chuck key ... not smooth at all. As if the gears inside have some roughness or so. I will try to grease it well and see, but overall it is ok, just not impressed with the fact it doesn't turn smoothly to open or close and not sure if it will last especially when exposed to wood dust and all the debris. Time will tell.
Scritto da: Juan M.
No hemos logrado insertar el vástago por completo, me podrían sugerir alguna forma de hacerlo?
No hemos logrado insertar el vástago en el portabrocas, cuando lo usamos en la fresadora tiene un gran movimiento oscilatorio. Alguien que nos pueda ayudar a resolver este problema?
Scritto da: Pierre Dudu
Exactement les dimensions et la qualité recherchée
Exactement les dimensions et la qualité recherchée Robuste, smooth, bonne qualité. Je ne l'ai pas encore utilisé mais je vois la qualité et fit exactement sur le tour à bois de Canadian Tire

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array