Orbit 35809 PVC-Lock-Entriegelungswerkzeuge, gemischt

Brand:Orbit

3.4/5

27.25

Vom HerstellerOrbit ist Nordamerikas führendes Unternehmen für die Bewässerung von Wohngebäuden. Mit einer Präsenz in über 180 Ländern und auf 6 Kontinenten bieten wir das umfassendste Ökosystem an Lösungen für Schlauchhähne, Schläuche, Schlauchenden, Untergrund, Tropf-, Nebel- und Gartenschutz. Seit mehr als einem halben Jahrhundert sind wir führend in der Branche bei innovativen Lösungen und haben über 100 aktive Patente sowie zahlreiche branchenweit anerkannte Auszeichnungen gesammelt. Von PVC-Lock, Blu-Lock und Drip-Lock, die eine außerordentlich schnelle Möglichkeit bieten, Sprinklerrohre und Tropfschläuche zu verbinden, bis hin zu unseren technologisch fortschrittlichen, meistverkauften B-hyve-Smart-Controllern haben wir die Branche modernisiert und Maßstäbe gesetzt Standard für Best Practices bei der Bewässerung von Wohngebäuden und sorgte für eine effiziente Außenbewässerung für Haushalte auf der ganzen Welt. Hydro-Rain ist das hochmoderne kommerzielle und landwirtschaftliche Gegenstück zu Orbit und bietet BUILT FOR SPEED-Angebote, die speziell für professionelle Lohnunternehmer und Landwirte entwickelt wurden. Gemeinsam bilden Orbit und Hydro-Rain eine Geschäftseinheit innerhalb der Gardena-Division der Husqvarna Group, die zusammen den weltweit größten Hersteller von Bewässerungsanlagen für Privathaushalte umfasst. Da die Sicherung des Zugangs zu sauberem Süßwasser für Gemeinden eine globale Priorität darstellt, sind wir stolz darauf, unser Engagement für die Bereitstellung eines umfassenden Ökosystems intelligenter Lösungen zu bekräftigen, das Anwendungen VOM WASSERHAHN BIS ZUM BAUERNHOF abdeckt, während wir kontinuierlich die Vision verfolgen, die Art und Weise zu verändern, wie die Welt mit Wasser versorgt wird .

Armaturen, die übermäßigem Wasserdruck und/oder Wasserschlägen ausgesetzt waren, lassen sich möglicherweise nur schwer entfernen. Wird zur Installation von PVC-Sprinklersystemen verwendet – konzipiert für die Verwendung mit PVC der Klassen 40, 80 und 200. Funktioniert mit 1-Zoll- und 3/4-Zoll-PVC-Lock-Anschlüssen. Löst PVC-Lock-Fittings aus PVC-Rohren.
Brand Orbit
Color Mixed
Exterior Finish PVC
Item Dimensions LxWxH 1.75 x 3.9 x 7.25 inches
Item model number 35809
Item Weight 0.01 Ounces
Manufacturer Orbit
Material Pvc
Number of Pieces 1
Product Dimensions 1.75 x 3.9 x 7.25 inches; 0.01 Ounces

3.4

9 Review
5 Star
63
4 Star
20
3 Star
9
2 Star
4
1 Star
4

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Shemers
3/4" works great, 1/2" not so much
I used the 3/4" fittings to pressure test a pvc assembly that was going to be hard to get to once installed. I used a cap on one end and a threaded adapter on the other. I bought a hose adapter that fit on the threaded end so that I could pressurize it. After testing I was able to remove the cap and the threaded adapter using the removal tool. The connectors went on and came off easy. They don't leak at all. That's the good news. The bad news is that when I tried something similar with 1/2" pvc the connector went on and sealed just as well, but they do not come off very easily. I was able to get the removal tool all the way in, but the little metal teeth in the connector were still dug in to the pvc. I was able to get the connector off by twisting and pulling, but it chewed up the end of my pipe. I have tried multiple fittings and 2 sets of release tools with the same result. I have also tried putting the connector on and removing immediately without ever pressurizing to see if the problem was from over pressurizing. It still scored the end of my pipe. I was hoping that I could use these to make a temporary seal that I could latter remove and glue a permanent connector in its place. With the pipe so badly scored, I think I will have to cut off the end first to get a good glue seal. I have not tried the 1" size yet.
Scritto da: S.S.
Very Useful Tool!
Set up a backup, satellite sprinkler system from the spigot in the backyard. When disconnecting that system in the late fall, this tool makes it a cinch. slide down into the connector and turn and you're disconnected in seconds. Everything reconnects with no issue, either. Worth the minor investment to save a ton of time.
Scritto da: LLP
Must have for Orbit pvc connectors
We used a few of the Orbit 3/4 quick couplers for non pressure pvc line. They are very easy to use and seem to work great. The Orbit release tool is a pretty much must have if you ever plan on taking them apart again. Only used the 3/4 tool so far. The tool is easy to use and releases the connecting barbs without any trouble
Scritto da: Hazard Area
Worked Great
I was fixing a 3/4" underground pipe with the 18" locking flexible pipe sold on this site, and wanted these tools in case I made a mistake and wanted to remove the flexible pipe. I didn't have to use the lock release took, but did use the deburring tool and it worked like a champ. What sold me on this kit is that they threw in the deburring tool with the lock release tools, which I thought was great.
Scritto da: 1 Bama Boy
Get the job done!
Perfect tools for the job. Worked on 3/4 PVC irrigation plumbing. Had my leak fixed in 15 minutes.
Scritto da: Theguyoverthere
Works great
I messed up and tried using a PVC Lock Slide to patch a puncture in my black 1 inch sprinkler line. It didn't work at all. The Orbit 35809 PVC-Lock Release tool set worked great and as advertised. It take a bit of practice to finagle it all the way into the lock slide side, but once pushed all the way, the pipe came right out. Now I can return the wrong part and get the correct one.
Scritto da: Judy Caunter-Crawford
Consider two sets of you need to replace an manifop
They work great. Use it to attach manifolds so we do not need to cut pipe when replacing manifolds. But we needed two to release manifold since the pipes are inches away from each other
Scritto da: S Moore
Do not mistake for eco-lock release tools
I mistook these for eco-lock release tools... not compatible.
Scritto da: Groot
Built with cheap plastic around the extremely sharp flimsy tin/stainless ...
Built with cheap plastic around the extremely sharp flimsy tin/stainless they use to slide into the fitting. For the most part, I ended up cutting off the existing fitting and putting a new one on rather than using these. The plastic started peeling off after first use.

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array