Nilight LED-Lichtleiste, 2 Stück, 18 W, Flutlicht, LED-Offroad-Lichter, 12 V, 5-poliger Wippschalter, LED-Lichtleiste, Kabelbaum-Set, 2 Jahre Garantie

Brand:Nilight

3.7/5

70.75

Spezifikation: LED-Leistung: 18 W (6 x 3 W hochintensive LED). Strahlmuster: Flutstrahl; Lumen: 1260LM. Eingangsspannung: 9–30 V DC (passend für 12 V, 24 V Fahrzeuge). Arbeitslebensdauer: Über 30.000 Stunden. Arbeitstemperatur: -40 ~ 85 Grad Celsius. LED-Farbtemperatur: Reinweiß 6000K-6500K. Material: Profil aus 6063er Aluminiumlegierung, hochwertige LED-Chips, PC-Linse. Wasserdichtigkeit: IP67; Wasserdicht, staubdicht, erdbebensicher und korrosionsbeständig. Zertifizierungen: CE, FCC und RoHS. Kabelbaum: 12 Fuß Universal-Kabelbaum-Kit – zwei Leitungen. Drahtstärke: 16 AWG; Betriebsspannung: 12 V Gleichstrom. Maximale Leistung: 180 W; Max. Ampere: 15A. 5-poliger Ein-Aus-Wippschalter; 12-V-Gleichstrom-Automobilrelais, Inline-Flachsicherung mit drei zusätzlichen Sicherungen. Anwendungen: Off-Road-Beleuchtung: Rückfahrlicht, Jeeps, 4x4, Autos, Motorräder, ATV, UTV, SUV, LKW, Anhänger, Gabelstapler, Züge, Boot, Bus, Straßenbuggy, Sandschiene usw. Andere Beleuchtung: Bagger, Planierraupe , Straßenwalze, Kran, Traktor, Mähdrescher, Getreidebohrer, Mäher, Schneepflug, Feuerwehrauto, Rettungsfahrzeug, Camping, Bergbau, Baubeleuchtung usw. Haushaltsbeleuchtung: Garten, Hinterhof, Garage, Innenbeleuchtung. (Hinweis: Verwenden Sie einen Spannungstransformator/Konverter, um den Wechselstrom von 110–120 V in Gleichstrom von 12 V für den Innenbereich umzuwandeln.)

Lieferumfang: 2 x 18 W LED-Lichtleisten, 1 x 5-poliger Wippschalter-Kabelbaumsatz. Breite Anwendung: Geeignet für fast alle 12-V-Batteriefahrzeuge, wie Jeeps, ATVs, UTVs, Autos, Motorräder, Schiffe, Yachten und Anhänger. Zwei verfügbare Kabel: 12 Fuß ausziehbarer Kabelbaum, zwei Sätze Lichtausgangsanschlüsse für zwei Leuchten mit weniger als 180 W. Verstellbare Montagehalterung: Mit der verstellbaren Montagehalterung kann die Arbeitsleuchte auf etwa 45 Grad eingestellt werden, was den Richtungswechsel erleichtert. Superheller und großer Beleuchtungsbereich: Fortschrittliche LED-Chips geben helle und weiße Strahlen für klare Sicht ab. Der speziell entwickelte Lampenbecher sorgt für einen größeren Beleuchtungsbereich, sodass Sie links und rechts klar sehen können.
Amperage ‎15 Amps
Brand Nilight
Brand ‎Nilight
Color Clear,White
Color ‎Clear,White
Country of Origin ‎China
Cover Included 2PCS 18W LED Light Bars, 1 x 5Pin Rocker Switch Wiring Harness Kit
Cover Included ‎2PCS 18W LED Light Bars, 1 x 5Pin Rocker Switch Wiring Harness Kit
Customer Reviews 4.6 4.6 out of 5 stars 809 ratings 4.6 out of 5 stars
Exterior ‎Painted
Fit Type Universal Fit
Fit Type ‎Universal Fit
Is Discontinued By Manufacturer ‎No
Item model number ‎ZH086
Item Weight ‎2.86 pounds
Light Source Type LED
Light Source Type ‎LED
Manufacturer ‎Nilight
Manufacturer Part Number ‎ZH086
Material 6063 Aluminum Alloy Profile, High quality Led Chips, PC Lens.
Material ‎6063 Aluminum Alloy Profile, High quality Led Chips, PC Lens.
Model ‎ZH086
Number of Pieces ‎2
Package Dimensions ‎6.93 x 6.57 x 3.98 inches
Position Left
Position ‎Left
Remote Control Included? ‎No
Vehicle Service Type Bus, Motorcycle, ATV, Car, SUV, UTV, Truck, Tractor, Trailer
Vehicle Service Type ‎Bus, Motorcycle, ATV, Car, SUV, UTV, Truck, Tractor, Trailer
Voltage 12 Volts
Voltage ‎12 Volts
Water Resistance Level Waterproof
Water Resistance Level ‎Waterproof
Wattage ‎180 watts

3.7

13 Review
5 Star
74
4 Star
18
3 Star
5
2 Star
2
1 Star
2

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Cameron
So far so good, except...
All in all they were easy to install. I put them on my 2010 Jeep Wrangler and installed the rocker switch on an aftermarket column switch for accessiblity. I've had them for 4 months now. They look good and are fairly bright. So far the issues are: 1. The wires exit out of the back right (if looking at the front of the light) of the light on BOTH units. So on your driver side, you lose about 3 much needed inches to get the wire connections to be comfortably under the hood panel hidden from the elements. I had to adjust the light position just right with aftermaket mounts and the connections are still just barely covered. I put heat shrinks as well as electrical tape for extra protection. The passenger side didn't have any issues. 2. The screws rusted within a month. I would suggest immediately getting new screws that are weather resistant so they aren't a hassle later. I don't like the idea of rust dripping onto my paint or having to snap the bolts in order to remove the lights in the future All in all though not a bad product for the price.
Scritto da: Vern
Good utility lights
No complaints with the light itself, would have appreciated a longer wiring harness but was easy enough to splice in some more length. Using for lighting the cargo box and rear of a UTV, floods the area with good bright light.
Scritto da: Chad
Very bright for size.
Came with all the parts needed for the install. I put them on my side by side and was surprised at how bright they are for small lights. There was more then enough wiring for a two seat Can-Am Commander and I actually cut and splice about 3 feet out of it. The included switch fit the factory cutouts on the dash. I did buy another witch that matched the factory stitch color since the one included was blue and mine are orange. I only needed to use zip ties to arrange the wiring away from moving parts. Easy install and very bright on the trail.
Scritto da: Bob H.
Works well
Installed these on my ZTR for illumination of the mowing area. Does that great and has no impact on the operation of the mower.
Scritto da: Amazon Customer
Work well, but not an easy install.
Lights work, but plan on spending at least 4 or 5 hours installing them with all the wiring and switch.
Scritto da: CJ
Great lighting kit for the money.
I love these. I put a set on the front of my UTV. I liked them enough to get another set for the back. Very good instructions. I did replace the cheap quick connect "spade" style connectors with heat shrink "bullet" connectors. I'm very pleased with these so far.
Scritto da: djwinter
Aluminum multi-strand wire
These are not for use with Adventure bikes or other vehicles where the switch is not fully protected from water, mud, and other elements. The connections on the back of the switch are not pictured but they are actually fully exposed and protrude a few centimeters. The wiring on the lights is a sheathed bundle of thin Aluminum strands so do not expect 16 GA solid Copper. Some of the other connections appear to be plated AL instead of solid Copper.
Scritto da: C. HEND
Very good lights
Lights was more bright than i had expected. Good product to purchase.
Scritto da: dave gagnon
Works well with my polaris general
Easy to install just bought pig tail to fit used black and blue wires so it ran off key
Scritto da: cds13
Bright lights
Used on a John Deere Snow Blower, wiring instructions were a little confusing to understand, eventually figured out the right configuration so that I wasn't draining the battery. Mounting brackets are a little difficult to attach the lights, very tight, not much room, overall, bright lights, took about 1-1.5 hrs to install mostly because of limited / tight space to work in the lawn tractor. Definitely brightens up the driveway at night now! Hopefully it lasts!
Scritto da: Jeanne
Great item
Great price, easy to mount and bright as promised.
Scritto da: Devin
Bright but not a ridged bright, but with it
I can see when I drive now freaking awesome
Scritto da: Michel lefebvre
Solide éclairage très puissant
Installation facile , très bon éclairage sur mon Vtt,

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array