Microjig Matchfit DV-HL2.0K6 Schwalbenschwanz-Hardware 2, 6-teilig,

Name: Microjig Matchfit DV-HL2.0K6 Schwalbenschwanz-Hardware 2, 6-teilig,
Brand: MICRO JIG
SKU: 0815267011382
Price: 41.18 EUR
Availability: InStock

Brand:MICRO JIG

3.9/5

€
41.18

Die MATCHFIT Schwalbenschwanz-Hardware von MicroJig hat die Holzbearbeitungsgemeinschaft im Sturm erobert und gibt Benutzern die Freiheit, Teile ohne teure T-Track-Komponenten dort zu verwenden, zu halten und zu befestigen, wo und wie sie sie benötigen. Und jetzt haben wir die Hardware noch besser gemacht. Sie erhalten alle Vorteile der Originalhardware sowie neue Komponenten und verbesserte Qualität! Zunächst haben wir der Linie eine 2 Zoll lange Schienenschraube hinzugefügt. Diese längere Länge bedeutet eine bessere Reichweite bei dickeren Materialien oder beim Arbeiten an schwer zugänglichen Stellen. Jede 2-Zoll-Schienenschraube wird mit einem Flügelknopf geliefert. Die Hardwarepakete bestehen nun alle aus sechs Teilen. MicroJig hat sich ständig verbessert und mit unseren Herstellern zusammengearbeitet, um die Qualität der MATCHFIT-Hardware zu verbessern. Die Formteile aller Komponenten bestehen aus einem stärkeren Harz für mehr Festigkeit, und die Gewindeabschnitte der Schienenschrauben haben jetzt die volle Länge, um beim Spannen mehr Reichweite zu bieten. • Die 2.0-Schienenschraube kann bis zu 1-3/4 Zoll erreichen

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0815267011382

Kategorien Werkzeuge & Heimwerken, Elektro- & Handwerkzeuge, Elektrowerkzeugteile & Zubehör, Vorrichtungszubehör,

Enthält (6) 10-32 2 Zoll lange Schwalbenschwanz-Schienenschrauben mit Flügelknöpfen. Vollständig kompatibel mit dem MatchFit-System aus Klemmen, Fräsern und Zubehör unter Verwendung des 14-Grad-x-1/2-Schwalbenschwanz-Fräserprofils. Bauen Sie vielseitige Zäune, Anschläge und Niederhalter für Ihre MatchFit-Vorrichtungen, Vorrichtungen, Schlitten und Werkbänke. Kompatibel mit Standard-Schwalbenschwanzfräserprofilen mit ½ Zoll und 14 Grad. Ermöglicht einen 360-Grad-Bewegungsbereich mit Schwalbenschwanznuten im Rasterlayout. Erstellen Sie verschiedene Vorrichtungen, die sich frei bewegen lassen, und ziehen Sie sie überall dort fest, wo Sie eine Nut fräsen können.

Batteries Required?	‎No
Customer Reviews	4.9 4.9 out of 5 stars 31 ratings 4.9 out of 5 stars
Included Components	‎Includes
Item model number	‎DV-HL2.0K6
Item Package Quantity	‎1
Item Weight	‎0.23 ounces
Manufacturer	‎Microjig
Material	‎Plastic
Measurement System	‎Imperial
Part Number	‎DV-HL2.0K6
Power Source	‎Hand_powered
Product Dimensions	‎4.85 x 1.26 x 3.5 inches
Usage	‎Amateur, Professional
Warranty Description	‎Extended 3-Year Warranty For Authorized Microjig Resellers Only

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Joey Thunder

Micro Jig does it again.

I think Micro Jig makes some of the best accessories in woodworking, all at a competitive price. This latest offering is no exception. High quality, color coded, easy to use, and multiple applications limited only by your imagination and skills. I have loads of Micro Jig accessories for building various jogs out of MDF, and this is a great addition to the arsenal. Recommended.

Scritto da: Nicholas Lagola

Jack of all trades

Innovative design and idea which can be used in 100’s of applications. All you need is a routed dovetail channel to unlock the potential of these bad boys. Can be used to construct tons of different jigs, adapted for use as hold downs or clamps on a work bench. If you can envision it you can make it. This set is a four pack with dovetail hardware and wing nuts.

Scritto da: DIY Shu

Good quality and great versatility

The microjig dovetail hardware is very high quality and built to last a long time. This hardware pack comes nicely packaged with all the pieces securely contained in a bag within a box. No pieces escape in shipping! Everything arrived in good shape. My entire work holding surface is based around the microjig dovetail hardware and I have been very happy with the ability of these little dovetail pieces to keep everything locked into place. I have been using the 1 1/2 inch sizes for quite a while, but I keep coming across situations when trying to hold thicker materials that a little longer would have been useful. This kit addresses those needs and does so very well. These slid into my existing work-holding pieces and into the existing dovetail tracks. I did notice that these pieces fit into my existing dovetail tracks a bit more snug than any of my other dovetail hardware (I own two other kits, 12+ pieces). I'm not sure if this is just because these are new, or if something has changed slightly in the manufacturing/design. Upon further investigation, it appears that these are just slightly taller, which pushes them down in my dovetail track a little further. The angle is the same and the fit is just right, but this being slightly taller makes the piece very snug vs. being easily slide-able throughout the track like my other microjig dovetail pieces. I tried to picture these side by side and the difference is unnoticeable in the pictures. This is not a show-stopper by any means. They still work. When I cut my next wasteboard with the dovetail tracks I will cut them slightly deeper to accommodate the slightly larger base. I'm very happy with this dovetail hardware pack.

Scritto da: Buy2Much

Great set for creating jigs using microjig dovetail slots

I recently had the chance to try the Microjig Matchfit DV-HL2.0K6 Dovetail Hardware 2", 6-Piece, and I must say, it's a valuable kit if you use the MicroJig dovetail slots! It allows me to create a variety of jigs that move freely and tighten down anywhere I can route a groove. The 360-degree range of motion with dovetail grooves in a grid layout makes it easy to create versatile fences, stops, and hold-downs for my MatchFit jigs, fixtures, sleds, and workbenches. The compatibility with standard ½” 14-degree dovetail router bit profile is a major plus, and it works flawlessly with the MatchFit System of clamps, router bits, and accessories. It's a great addition to my woodworking tools and has made my work much more efficient and precise. The package includes six 10-32 2” long dovetail track screws with wing knobs, which is enough to get me started on a number of projects. The installation was easy and straightforward, and the hardware is made of high-quality materials that are built to last. This is a great starter kit for the microjig slots. Overall, I'm extremely satisfied with the Microjig Matchfit DV-HL2.0K6 Dovetail Hardware 2", 6-Piece. It's a versatile and reliable addition to my woodworking tools, and I would highly recommend it to anyone looking to improve the accuracy and efficiency of their jigs and fixtures with MicroJig

Scritto da: Utah #1

Work great, smooth, strong

These 2" long dovetail track screws (six in package) are just as expected from Microjig. I use their Matchfit dovetail router bit for making clamping grooves, which these fit in very well. A standard 14 degree dovetail groove also works, but I like the nice rounded top edge of the Matchfit cut grooves for tooling grid stuff. These track screws are nicely made. There is a press-fit solid brass insert in the base of the wing knobs to interface with the black oxide coated steel threaded stud (fits 3/16" diameter hole). There is just over 1-1/2 inches of capacity between the working base surface and bottom of the knob with full thread engagement of the wing knobs. The knobs have a 1/2 inch diameter bearing surface. The wings on the knobs are 1.1 inches across. The knob spins down on the stud very smoothly and quickly. I installed one of these and tightened the knob down as tight as I could, on a 3/4" wood spacer, with my unassisted hand - got it pretty darned tight (hard to get back loose). It held solid. After disassembly, visual inspection showed no damage at all to the dovetail slide, stud, or wing knob. All my Microjig items work well. These longer stud length track screws are no exception. Most happy.

Scritto da: Careful shopper

Great workbench upgrade!

I got these to upgrade my workbench and they do not disappoint. It's sort of a pain if you have to create the channels to use them with, but it's also a fun DIY project in and of itself! These slide very well and have a good hold strength. The ergonomics are great as well. I think maybe a little pricey given what they are, but they get the job done!