Kingston Brass KB758SP Magellan Hochbogen-Küchenarmatur mit Sprüher, 7 Zoll, gebürstetes Nickel

Brand:Kingston Brass

2.7/5

123.21

Diese Anderson Metals-Kupplungs-Kompressionsrohrverschraubung besteht aus Messing, verfügt über einen aufgeweiteten Rohranschluss und einen NPT-Innengewindeanschluss und ist für den Einsatz mit Kraftstoff- und Gassystemen geeignet. Es besteht aus Messing für Korrosionsbeständigkeit, Duktilität bei hohen Temperaturen und geringe magnetische Permeabilität. Dieses Fitting kann mit Kupfer-, Messing-, Aluminium- oder Stahlrohren verwendet werden, um zwei Rohre mit demselben Durchmesser in einem geraden Verlauf zu verbinden. Es verfügt über einen aufgeweiteten Rohranschluss an einem Ende und einen NPT-Innengewindeanschluss (National Pipe Taper) am anderen Ende, wodurch eine dichtere Abdichtung als bei geraden Gewinden entsteht. Diese Armatur ist Teil einer Baugruppe, die für eine sicherere Verbindung einem mechanischen Herausziehen standhält und ohne Beeinträchtigung der Dichtung zusammengebaut und wieder zusammengebaut werden kann. Diese Kupplungs-Kompressionsrohrverschraubung hat einen Betriebstemperaturbereich von -65 bis +250 Grad F und ist für den Einsatz mit Kraftstoff- und Gassystemen, Sanitär-, Kühl- und Vakuumanwendungen geeignet. Rohrverschraubungen sind Komponenten, die zum Verbinden, Abzweigen, Abschließen usw. verwendet werden Ändern der Richtung von Schläuchen in pneumatischen und hydraulischen Systemen. Sie bestehen aus Messing, Edelstahl, PBT (Polybutylenterephthalat) und anderen Materialien, die Korrosion und Verschleiß widerstehen. Rohrverschraubungen verfügen über verschiedene Arten von Verbindungen, darunter Gewinde-, Schweiß-, Widerhaken- und Push-to-Connect-Verbindungen (auch One-Touch-Verbindungen genannt). Push-to-Connect-Verbindungen erfordern keine Werkzeuge oder Dichtmittel. Rohrverschraubungen werden in verschiedenen Anwendungen eingesetzt, unter anderem in Werkzeugmaschinen, Flugzeug- und LKW-Steuerungen und automatisierten Produktionslinien. Anderson Metals stellt Messingverschraubungen, Ventile und Rohrnippel her. Das 1951 gegründete Unternehmen hat seinen Hauptsitz in Kansas City, MO.

Konform mit Titel 20 der California Energy Commission. 1,8 GPM/6,8 LPM Auslaufdurchflussrate bei 60 PSI (ASME-Standard). Passender Kunststoffsprüher im Lieferumfang enthalten. Erstklassiges Finish. 4-Loch-Installation mit 9-1/2 Auslaufabstand. Kartusche ohne Unterlegscheibe mit 1/4 Umdrehung. Hoher, schwenkbarer Auslauf.
Batteries Required? ‎No
Brand Kingston Brass
Brand ‎Kingston Brass
Color Brushed Nickel
Color ‎Brushed Nickel
Customer Reviews 3.7 3.7 out of 5 stars 53 ratings 3.7 out of 5 stars
Finish ‎Brushed
Finish Type Brushed
Finish Type ‎Brushed
Handle Location ‎centerset
Handle Material ‎Brass
Handle Type Lever
Handle Type ‎Lever
Head Style ‎Standard
Included Components Sprayer
Included Components ‎Sprayer
Installation Method Centerset
Installation Method ‎Centerset
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎10.88 x 10 x 2.25 inches
Item model number ‎KB758SP
Item Package Quantity ‎1
Item Weight ‎0.01 Pounds
Item Weight ‎0.16 ounces
Manufacturer ‎Kingston Brass - Drop Ship
Material nickel
Material ‎nickel
Maximum Flow Rate ‎1.2 Gallons Per Minute
Mounting Type Deck Mount
Mounting Type ‎Deck Mount
Number of Handles 2
Number of Handles ‎2
Number Of Holes 2
Number Of Holes ‎2
Part Number ‎KB758SP
Product Dimensions ‎10.88 x 10 x 2.25 inches
Size ‎7 Inch
Spout Height ‎10.88 Inches
Spout Reach ‎7 Inches
Water Consumption ‎1.2 Gallons per Minute

2.7

8 Review
5 Star
56
4 Star
7
3 Star
6
2 Star
11
1 Star
20

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: TR
Total disappointment
Ok, here I am less than a year after a professional install looking to buy another kitchen faucet.... But NEVER from Kingston brass. Tech support and warranty is worse than the shoddy product itself. I just asked for a replacement o ring because, now, the center spout leaks and won't swivel. I told them my installer will repair at no charge. I was told to pound sand? Wow... Losing a customer over a $1 part. I'm glad... It leaks at the base, I had to silicone it... The finish is cheap and horrid. That's my thanks for sticking with an American Co.... Though the faucet is still Chinese. Why pay extra for a worthless A American middle man? Beware Kingston brass with so many more and better options available. I learned the hard way.
Scritto da: Roger R. Collins
Not shipped Prime as noted.
Falsely advertised as Prime. Cant use kitchen sink.
Scritto da: TracerRound
Awesome price, quality faucet
Easy to install...same as any 2 handle faucet. Looks very nice. We have low water pressure in the kitchen and this does just fine at 1.8 gpm. Did not have to remove aerator (or make hole a little bigger in the aerator) for 2.2 gpm. No leaks. You get 2 or 3 drips out of spout after turning it off but it is just residual water, not a leak. Sprayer functions nicely. Faucet is well made and has sone weight to it. Plenty of room under the spout to wash larger pots and pans. Our previous high arc pull down faucet came out 1 more inch but this is just fine. Could not beat the $52 price, hours later it went up $20. Local Menards was $82. Still a decent price for the quality.
Scritto da: Evey Tobin
Not So Great
I purchased this faucet for it's shape & spayer , I wanted something that would allow me to easily fit a pot under it, that part is nice, & I really needed a sprayer. What I'm not happy about is: 1) the sprayer barely sprays, not enough water comes out to make it useful. Probably a water saving thingamagig in there. 2) that it has not been even a year since we installed it & the sprayer is leaking all over the place, luckily I noticed before it caused too much water damage under our sink. The box states it has a 10 year warranty, I'll have to check that out, but in the meanwhile, I'll have to shlep to my local home improvement store to buy a replacement because I have to keep the sprayer covered in a ziplock bag hanging into our sink to keep it from squirting everything with water everytime we turn the faucet on, for THAT it has pressure!
Scritto da: Linda J. Siptrott
Beautiful Faucet… well made
I am very happy with this purchase. It’s nice and solid… t he r design of the faucet reaching out rather than a big arch is very handy for filling large containers. Handles work well… Overall it’s well made and a void value for the price
Scritto da: Stacy
Great Faucet.
The product is as stated in the description and the brass is awesome. Unfortunately, the faucet is not far enough from the back of the sink for my needs. It takes a minute to get used to the placement of the faucet and accommodate the difference and this would be different, of course, per sink. But, it's a great product. It does not leak and the side sprayer works great.
Scritto da: Darrius P
I am pleased. The color is more of a red brass ...
This is a decent set for the price. My only complaint is that I wish the spigot extended out at least an inch farther than it does. It is a bit too close to the edge of the sink making difficult to fill larger items. But otherwise, I am pleased. The color is more of a red brass which doesn't match our yellow brass everywhere else but I do prefer the red brass.
Scritto da: Amazon Customer
Love the color
The copper finish is what I was looking for. It matches most of my copper accessories in my renovated kitchen. The only negative is the faucet arm does not extend out to far. I'll live with it. Price was very good buying point.

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array