IRWIN Tools 1881080 Impact Performance Series Betonschrauben-Bohrantriebs-Installationsset für 3/16-Zoll- und 1/4-Zoll-Schrauben, 7-teilig. 3/16-Zoll und 1/4-Zoll, 7-teilig

Name: IRWIN Tools 1881080 Impact Performance Series Betonschrauben-Bohrantriebs-Installationsset für 3/16-Zoll- und 1/4-Zoll-Schrauben, 7-teilig. 3/16-Zoll und 1/4-Zoll, 7-teilig
Brand: Irwin Tools
SKU: 0042526922244
Price: 74.27 EUR
Availability: InStock

Brand:Irwin Tools

3.4/5

€
74.27

Hergestellt aus robustem, kaltgeschmiedetem Edelstahl, um hohen Drehmomenten standzuhalten. Die schwarze Oxidoberfläche schützt vor Korrosion und erhöht die Lebensdauer des Bits. Die einteilige Konstruktion hält höheren Drehmomentbelastungen stand als herkömmliche Schnellwechsel-Bits. Innovative gepresste Hartmetallspitze mit aggressiven Schneidwinkeln für schnelleres Bohren und längere Lebensdauer des Bohrers. Gebaut für maximale Haltbarkeit und lange Lebensdauer mit Schlagschraubern.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0042526922244

Kategorien Elektro- & Handwerkzeuge, Elektrowerkzeugteile & Zubehör, Bohrmaschinen, Teile & Zubehör, Twist Bits, Bohrer Bits, Jobber-Bohrer,

Brand	Irwin Tools
Finish Type	Black Oxide
Item Dimensions LxWxH	0.75 x 4.94 x 10 inches
Material	Carbide, Steel
Shank Type	Hex

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: New

Concrete bit broke first time using

The concrete bit broke on first use, which isn’t that common after a couple of weeks, but not the very first time. I purchase in the store all the time with different brands but first time online

Scritto da: Amazon Customer

Must have for tapcons!

This kit is by far the best tapcon kit and will save you time and money in the long run! The bits and driver’s have lasted me forever, until I loaned 1 out so I bought an extra as they were hard to find. Great Value for a great product! Thank You Irwin Tools!

Scritto da: Richie 009

this is a great product and it does the jobs very good and ...

this is a great product and it does the jobs very good and convenient I would had given a 5 stars it just seams that after drilling three holes on concrete and blocks walls the drill bits looses its original state and drilling performance tents to be poor unless you use it for something quick and easy you will need to purchase a new bits to have it as spare just in case they get worn-out before you get your job done, but other than that I am satisfied with the product. so if your an extreme handyman like me is best to buy extra drilling bit just in case , but if you are an just in while thing this will do just fine for you it is really great item to have in your tools box.

Scritto da: outlaw102938

Great quality pieces

This is a great quality little set. All items are useful and i really like the shank that slides over the bit to allow quick changes between drilling and driving. I do wish it would have came with 2 of the same style bits, only longer. I say this because if you are drilling through a 2x4 plate that's already placed on a concrete floor, you will not achieve a deep enough hole for a typical 2 3/4" tapcon, since it needs to be 1/4" deeper than the screw. Anyone who uses tapcons knows how critical this is because they are pretty easy to twist off if not, especially in poured concrete. This is not an issue when pre drilling holes for anything to be mounted afterwards, i.e- conduit straps. But the pieces are of good quality. I would like to pay a little more and get 2 longer bits and a case for it all, since there's also no case.

Scritto da: Mataba Kalbo

A must if you use Tapcons!

great time saver if you have to drill into concrete and then drive a Tapcon into the hole. While mounting stereo speakers on the wall, this saved me time and effort while up on a ladder, not having to swap out the bit to drive the bolt into the wall. The magnet is strong enough to hold the sleeve over the bit, and then another magnet holds the nut driver over the sleeve. You can also use a screwdriver bit in the place of the nut driver. I wish I had this many products ago!!!

Scritto da: Alex c

Nicegood kit tools

Used this to install 88 tapcon 1/4 inch screws worked as expected. I trust Irwin tools as they have never let me down. I wish it had a carrying case so I don’t lose the parts and get an 2 extra bits if you are doing as many holes as I did!!!

Scritto da: F. Montijo

Quality Tool

After 3 years of heavy use, someone broke into my vehicle and took my Irwin tool. These tools are tough and should last you quiet a long time. Conduit and ductwork does not stand a chance. I'm hooked on Irwin tools.

Scritto da: Alex vorcheimer

Nut driver does not stay fastened and shaft when pointed down

As a professional electrician, working in the field with tools all day. Very frustrating when you count on a tool to the performance job properly. It fails to fasten in place falls out when you’re on a ladder constantly going up and down

Scritto da: J. L. in Toronto

Don't even think of screwing into concrete without this thing.

Wow!! How did I ever live without this before? Just spent two days putting up shelves in the garage. This drill bit and hex socket made the job 10x easier. Cut through cement cinder blocks like it was wood. Max torque hammer drilling and 4 inch screws never wore down the drill bit nor the socket fitting. The extension is handy in the tight corners.

Scritto da: ALEX. M

PRACTICO

Set genial para instalacion de tornillos tipo Tapcon, la broca excelente para perforar concreto, buen producto y como siempre excelente el tiempo de entrega de Amazon...

Scritto da: wanda

Gps

Nothing to dislike it keeps my speed in check lol