IRWIN HANSON 1/4 - 28 NF Gewindebohrer und Nr. 3 Bohrersatz, 80232

Brand:Irwin Tools

3.8/5

26.15

PRODUKTBESCHREIBUNG Der IRWIN HANSON 1/4 - 28 NF Gewindebohrer und Bohrer Nr. 3 ist ideal zum Erstellen präziser Löcher und 28 sauberer Gewindegänge pro Zoll in Metall für allgemeine Bohrzwecke. Der Bohrer besteht aus Schnellarbeitsstahl für schnelles Bohren, während der Gewindebohrer für eine lange Lebensdauer aus Kohlenstoffstahl gefertigt ist. VOM HERSTELLER Bohrer- und Gewindebohrerpakete, enthalten 1/4 Zoll – 28 Gewindebohrer + Nr. 3 Bohrer. Schwarze Oxidoberfläche auf allen Hanson-Gewindebohrern aus Kohlenstoffstahl mit halbporöser, matter Oberfläche, die dafür sorgt, dass das Schneidöl haftet und das Öl effektiver in den Schnitt transportiert, wodurch das erforderliche Antriebsdrehmoment reduziert und die Schneidtemperaturen gesenkt werden. Die Oxid-Oberflächenbeschichtung verringert auch die Neigung der Späne, sich mit dem Gewindebohrer zu verschweißen, was zu niedrigeren Schnitttemperaturen und einem freieren Spanfluss führt, was die Standzeit des Werkzeugs erhöht. Irwin-Werkzeuge bestehen nur aus den besten Materialien und werden mit genauen Toleranzen hergestellt.

Enthält 1 Bohrer und 1 Gewindebohrer. Gewindebohrer aus Kohlenstoffstahl für allgemeine Bohrzwecke. Bohrer aus Schnellarbeitsstahl für schnelles und präzises Bohren. Erzeugt 28 Fäden pro Zoll. Ideal zum Erstellen und Einfädeln von Befestigungslöchern in Metall.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Irwin Tools
Brand ‎Irwin Tools
Color ‎Multi
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 268 ratings 4.7 out of 5 stars
Finish ‎Black Oxide
Finish Type Black Oxide
Finish Type ‎Black Oxide
Included Components ‎TAP + DRILL BIT 1/4-28 NF + #3
Is Discontinued By Manufacturer ‎Yes
Item Dimensions LxWxH 5.8 x 6.1 x 0.3 inches
Item Dimensions LxWxH ‎5.8 x 6.1 x 0.3 inches
Item model number ‎80232
Item Package Quantity ‎1
Item Weight ‎0.634 ounces
Manufacturer ‎Irwin Tools
Material Blend
Material ‎Blend
Measurement System ‎Inch
Part Number ‎80232
Product Dimensions ‎5.8 x 6.1 x 0.3 inches
Shank Type Straight
Shank Type ‎Straight
Size ‎One Size
Surface Recommendation ‎Aluminum,Brass,Steel
Tool Flute Type ‎Spiral

3.8

11 Review
5 Star
84
4 Star
10
3 Star
3
2 Star
1
1 Star
2

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: James R
Same as a hardware store but less expensive
Price was reasonable
Scritto da: J-6
Worked perfectly
This drill and tap for 1/4 x 28 worked perfectly. There was no slop in the threads and bolts fit with ideal tolerance.
Scritto da: Billy
Quality
Bought this for a particular job and it performed as expected. I would recommend this to anyone.
Scritto da: ELEAZAR ARAUZ
Easy to use
Bought it to install grease fittings on my 4Runner {Ball joints, sway bars , } Very easy to use, I’m happy camper. ????Would buy again
Scritto da: BOBBY J.
Great product
Well built and worth the price
Scritto da: Dirigo
I ordered a 1/4-28 NF thread set. I received ...
I ordered a 1/4-28 NF thread set. I received a package labeled as 1/4-28NF but it had a 1/4-20 NC tap in it. I will reorder instead of sending it back because it will take more time to re-package it than it is worth. It's Irwin's fault and not Amazon's but a PITA just the same. Lets hope the second time is a charm instead of the third.
Scritto da: Brandon
Good
Must have for grease zerts in equipment! Got it because i snapped my gearwrench one. ????
Scritto da: Scott2228
Works
Worked perfect.
Scritto da: James
Excellent price
I bought this set (drill bit plus tap) for a home project and haven't used it yet. I'm only tapping into a piece of brass once or twice so the tap won't get heavy use - at this price I cannot complain. Prompt delivery Update - I finally got around to tapping the thread as planned ages ago. Opened the packet, tapped away, everything goes well, it cut nicely into my piece of brass. Only the part I need to screw into it doesn't fit. After a little head scratching I realise I have been sent the wrong tap. I ordered a 1/4" with 28tpi. Amazon sent me 1/4 with 20tpi, a coarser thread. Double checked my order - yes, I really did order a 28tpi tap. But now I've wasted a whole ton of time making the part I wanted to tap and will need to start over again. So I've downgraded for the service. This isn't Hansons fault - if you want to tap a 1/4"- 20 thread per inch hole then it's great for the job. But if you want a 28tpi tap as advertised then I recommended 1st crossing your fingers then 2nd check the product when it arrives.
Scritto da: Jorge luis
Excelente juego para barrenar y machuelear.
Muy buenas herramientas, las use para maquinarle los barrenos para instalarle graseras o alemites a las rotulas de mi vehículo y trabajaron muy bien hice el trabajo sin problemas.
Scritto da: Aaron
Five Stars
Works just like a drill and tap is supposed to.

Verwandte Produkte

hot
9x1,5 Teks-Bohrspitze
0.1/5

€ 96.50

9x1,5 Teks-Bohrspitze
0.1/5

€ 96.50

hot
BLACK+DECKER 19111 Rundbohrer, 1/2 Zoll
3.6/5

€ 38.17

BLACK+DECKER 19111 Rundbohrer, 1/2 Zoll
3.6/5

€ 38.17

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array