Highcraft PXBND12-10 PEX-Biegestütze 1/2 Zoll, Wandmontage-Rohraufhänger 90 Grad mit Nagelplatte, Polyethylen (10er-Pack), schwarz 1/2 Zoll.

Name: Highcraft PXBND12-10 PEX-Biegestütze 1/2 Zoll, Wandmontage-Rohraufhänger 90 Grad mit Nagelplatte, Polyethylen (10er-Pack), schwarz 1/2 Zoll.
Brand: Highcraft
SKU: 0804595354797
Price: 41.36 EUR
Availability: InStock

Brand:Highcraft

3.5/5

€
41.36

✔DIE PEX-REVOLUTION: PEX ist die bevorzugte Wahl für Wasserversorgungs- und Wasserheizungsanwendungen und zeichnet sich durch geringere Kosten, schnellere Installation, Flexibilität, Haltbarkeit, Frostbeständigkeit und Korrosionsbeständigkeit aus! !. ✔ABMESSUNGEN: 5 Zoll lang, passend für 1/2 Zoll PEX-Rohr, mit Nagelplatte mit 2 vorgebohrten Löchern (Nägel nicht im Lieferumfang enthalten). ✔GLATTE KUNSTSTOFFKONSTRUKTION: Reduziert Lärm, Vibrationen, Knicke, übermäßiges Biegen und Einschränkungen des Wasserflusses. ✔EINFACHE INSTALLATION: Reduzieren Sie die Arbeitskosten erheblich mit dieser leistungsstarken PEX-Winkelhalterung. Kein Werkzeug, Löten oder Crimpen erforderlich. Nageln Sie einfach die Montageplatte an die Oberfläche (vorgebohrte Löcher für zusätzlichen Komfort) und klicken Sie den PEX-Schlauch in die Armatur. So einfach ist das! Kann mehrmals entfernt und wiederverwendet werden. ✔ULTRA SICHERE PASSENDE PEX-AUFHÄNGERUNG: Bietet eine starre 90°-Biegungsunterstützung für PEX-Schläuche, die neben einer Wand oder einem Balken verlaufen.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0804595354797

Kategorien Werkzeuge & Heimwerken, Grobinstallation, Rohre, Rohrverbindungen & Zubehör, Rohrhalterungen,

Batteries Required?	‎No
Color	‎Black
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 278 ratings 4.5 out of 5 stars
Item model number	‎PXBND12-10
Item Package Quantity	‎1
Item Weight	‎6.7 ounces
Manufacturer	‎Highcraft
Part Number	‎PXBND12-10
Product Dimensions	‎5 x 0.5 x 0.5 inches
Size	‎1/2 in.

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Xerocool

perfect

no fails or issues. works as it should

Scritto da: Stephen P. Berzins

Not as pictured. What I received was like most of the her ones, attachment inside the bend.

Worked fine, but ordered this 10 pack instead of just two I needed only because I wanted the different attachment point, on top, not under the the bend. But, in the end they worked just fine

Scritto da: DustStorm

3/4 inch PEX is very, very, very, very, very, very, very hard to bend 90 degrees!

Obviously, most important part of using these supports is to be able to bend the PEX piping. It seems that everyone who deals with PEX espouses the virtues of its flexibility, which of course is true. But, working by myself, I found the reality of bending ¾” PEX to a 90° angle virtually impossible. I gave up, found that I could make due with less sharp turns. (I give 5 stars because I couldn’t use the supports! Returned.)

Scritto da: Bugs

Considering how easy this break, you may want to be sure you order some extras

Maybe its that were a little bit stronger than they are, but it did surprise me when the second one snapped. Get extras so you’re not stuck without finishing your work.

Scritto da: Michael Maddux

These are needed

These work well for molding pex into a turn. The pex is flexible but it has a memory and try to return to its original shape. These hold it into shape even if you need to make a turn without needing to secure it.

Scritto da: WilliamB

Good if you add a little heat and aren't rough.

Broke the first one trying to make a bend on pex at about 68F. I used a heat gun to gently warm the pex and was able to get 4 on without much issue. It was critical to hold the pipe at the 90° angle until it cooled a little or it would extend to around 110°. Not bad, but not at strong as the metal ones from sharkbite. The mounting holes worked well.

Scritto da: PigPen4x4

Not rigid...

Whether these are good or not depends on your expectations. I needed a pretty tight bend and the metal style would hold this very well. These being plastic, have some give so the bend is more like 75-80 degrees (I dunno, didn't measure) rather than 90. Many places these will be OK, others not so much.

Scritto da: Wayne Richardson

Weak plastics

I purchased 1 pack of 10 and started to install them. The first two installed properly, the next two snapped when I was trying to insert the pipe. These plastic supports don't give much support, and snap too easily. I will not purchase again.

Scritto da: Robert Marin

Light and snap well

I had a few break on me

Scritto da: KM Purcell

They seem to make a bit too small of a circle. But I am sure it will work fine.

It is very sharp on the edges. I have to learn how to use properly. It can mark up or scratch the pex very easily. But I have never used this type. So, I'm a newbie..