HHIP 2000-0045 3/8 x 3 Zoll 8 % Kobalt Vierkant-Werkzeugbit 3/8 x 3 reguläre Länge, M42 8 % Kobalt

Brand:HHIP

3.6/5

28.40

Edwards Signaling 270STRG120A Xenon-Blitzmodul. Die Linse besteht aus einem selbstverlöschenden Polycarbonatmaterial und ist kratz- und stoßfest. Verfügt über ein Verriegelungssystem für eine schnelle Montage ohne Werkzeug. Wird für industrielle Anwendungen verwendet und erfüllt gleichzeitig die Anforderungen von Maschinenbauern und OEMs. Linsenfarbe Grün / Graue Basis

M42 8 % Kobalt; Normale Länge. Kobalt Hochwertige Schnellarbeitsstahlsorten, die bei starker Hitze besser funktionieren. Wird für schwere Schnitte in harten Materialien verwendet. Kobalt Hochwertige Arten von Schnellarbeitsstahl, die bei hoher Hitze besser funktionieren.; Wird für schwere Schnitte in harten Materialien verwendet. Größe (Zoll) SQ x Länge 3/8 x 3; Normale Länge; M42 8 % Kobalt.
Brand HHIP
Country of Origin China
Item Dimensions LxWxH 3 x 1 x 6 inches
Item model number 2000-0045
Manufacturer ABS Import Tools Inc.
Material Cobalt
Product Dimensions 3 x 1 x 6 inches; 1.76 Ounces
Shank Type Square
Tool Flute Type Straight

3.6

12 Review
5 Star
73
4 Star
18
3 Star
4
2 Star
1
1 Star
2

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Pootie Tang
Extreme wear-resistance, especially when grinding, sharpening and polishing.
I got this to make a wood-turning tool called a bedan. Last year I made one out of M2, and I wanted to try M35 to see if it would hold an edge longer. M35 is basically M2 which has cobalt added to improve the wear-resistance and red-hardness. The downside of wear-resistance, of course, is that it takes a lot longer to grind, but a bedan is a pretty simple tool to make, and the red-hardness means you can do most of the grinding on a bench grinder or other high-speed grinder without affecting the hardness. The thing I wasn't prepared for was that the blank had scratches on all four sides and the sides weren't perfectly flat, and, for mainly esthetic reasons, I give my tools all my tools' flat surfaces a high polish with a series of diamond sharpening stones. This has to be done by hand, and in this case it took forever.
Scritto da: David
Definitely hard
Grinding one end to a parting tool takes quite a bit of time compared to standard steels that I normally grind for other things. This should perform nicely when I get it all finishe.d
Scritto da: William
Perfect ????????
Exactly to my expectations. Happy with the purchase.
Scritto da: mrbadasswrench
Fine tool
Will do what I need to do, perfect.
Scritto da: Amazon Customer
The moment you think you messed up...
I didn't measure nor check to see the size of HSS I needed, so I got a one smaller than I'd expect, But still did its' job.
Scritto da: Jim
A decent piece of HSS
Purchased for metal turning. The metal quality was decent, ground easily, and held a decent edge. Used to to aluminum, and cold rolled steel.
Scritto da: DrPhil
Seems to be as advised.
5/16 tool works great on the Chinese mini lathe.
Scritto da: Chris
Exactly what they are.
Not sure how you can mess up a high speed steel blank, but these are exactly what they are supposed to be.
Scritto da: Prem
Use as "Reed Geek" on woodwind Reeds (Saxophone)
Awesome! Although I haven't used it to turn/cut metals - it does what I wanted it to do, and that is - to repair/rework Saxophone reeds (made of Cane/Bamboo) at a fraction of the cost of a custom tool marketed just for that purpose. What I received was well polished with straight and sharp edges. I was able to use it straight out of its pouch. I ordered one more. Hope I find the same quality finish even on the 2nd one. One thing to note: the plastic pouch it comes with is very poor quality. But then, that's secondary....
Scritto da: Roger Vermette
tres bien
travail bie l,accier
Scritto da: james M.Hill
Excellent product
Excellent product exactly as advertised
Scritto da: bzchen
H
Too expensive

Verwandte Produkte

hot
Woodstock D4251 Universaladapter
2.1/5

€ 27.20

Woodstock D4251 Universaladapter
2.1/5

€ 27.20

hot
Hobart 770457 6011 Stick, 1/8-25lbs
3.8/5

€ 216.97

Hobart 770457 6011 Stick, 1/8-25lbs
3.8/5

€ 216.97

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array