GE WD15X10004 Wassereinlassventil

Brand:GE

3.7/5

130.06

PRODUKTBESCHREIBUNG WD15X10004 für GE Geschirrspüler-Wassermagnet-Einlassventil PS259369 AP2039344 Wasserventil Original GE-Teilenummer WD15X10004. Dies ist eine Wassereinlassventilbaugruppe mit Halterung und Magnetventil. Es verfügt über einen 3/8-Zoll-Rohreinlass. Bei einigen Installationen ist es erforderlich, die Montagehalterung von diesem Ventil zu entfernen und die Montagehalterung vom Originalventil wiederzuverwenden. Dies passt für bestimmte von General Electric hergestellte Geschirrspülermodelle, einschließlich GE, Hotpoint, RCA, einige Kenmore-Modelle. Ersatz für Nummer AP2039344 und PS259369, WD15X10011, 165D8258G006. VOM HERSTELLER Dies ist ein Originalersatzteil, die Modellnummer und der Name für den folgenden Artikel: General Electric (GENF0) WD15X10004 Wassereinlassventil

Keine Einheiten verfügbar

EAN: 0852670978765

Kategorien Geräte, Großgerätezubehör,

Kompatible Modelle finden Sie in der Produktbeschreibung. Ersatzteile für Geschirrspüler. Dies ist ein Originalersatzteil. General Electric (GENF0). Ersatzteile für Geschirrspüler. Dies ist ein Originalersatzteil. General Electric (GENF0).
Batteries Included? ‎No
Batteries Required? ‎No
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 42 ratings 4.6 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎No
Item model number ‎WD15X10004
Item Package Quantity ‎1
Item Weight ‎6.6 ounces
Manufacturer ‎General Electric
Part Number ‎WD15X10004
Product Dimensions ‎10.5 x 7.8 x 2.4 inches

3.7

10 Review
5 Star
77
4 Star
9
3 Star
14
2 Star
0
1 Star
0

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: congaboy77
Fixed My Issues
Fixed my issue with water flow to the dishwasher. The dishwasher would not fill up. Installed without any problems. A few tips: 1. Make sure you save your old valve until you install this one. You may need to reuse the bracket from the old unit. 2. Run the screws through the screw holes of the unit before you try to install it. It's easier to get the screws in when the valve is in a tight spot if they have been run through at least once before. 3. Don't forget to save the dishwasher elbow that's probably attached to the old valve. I went ahead and installed a new one as there was buildup on the inside of the old one. 4. Make sure you have the appropriate pipe dope or pipe thread for the installation. 5. The screen on my old valve was clogged with debris from my water supply. Most of the valves do come apart so that you can clean the screen. You have to pay close attention. Initially it looks like one big unit that can't come apart. Overall easy installation and very useful part.
Scritto da: Brad Magby
Poor craftsmanship or QC
The bracket that was supplied came with holes that were not tapped Ended up using the old bracket to get it iny
Scritto da: David
Fit Perfect
Perfect fit. its kind of easy to install. I did it myself and have never done it before. it took me over an hr but I am sure a handy person can do it in much less time.
Scritto da: Rick S.
As described
The correct part for my GE Profile dishwasher. Worked as described. Saved me a large plumbing bill to repair a dishwasher that wasn't fully filling with water and not cleaning the dishes very well. It wasn't too difficult to install.
Scritto da: Cookie Dee
It worked great with a minimal amount of time to install
I had only paid $50 for my used dishwasher so when the inlet valve broke I thought about buying a new dishwasher because I did not want to spend another $50+ dollars to fix it . So Instead I bought the used inlet valve for under $12. It worked great with a minimal amount of time to install. Fixed the problem for under $12!!
Scritto da: chi
Installed
Worked gr8 on my ge profile 2004 dishwasher model pdw-8280J03. Could have sent an o clip. We bought one for 1$ at Home Depot.
Scritto da: K. Palmer
for do it yourselfers
My dishwasher stopped working, and IF it had been the water inlet valve that stopped working, this product would have fixed it. It was the right part for my 15 1/2 yr old dishwasher, but it turned out that my dishwasher had other problems. It was time to get a new one.
Scritto da: Marty H
Installed and Dishwasher is like new!
Bought this to fix my dishwasher, so happy to find it, a friend installed for me. Thank goodness if I have a repair man, I would probably have a new dishwasher and be in debt!
Scritto da: Matthew D.
Original and working.
After my dishwasher flooded my basement I needed this part. It came fast and fixed the leak… too bad it can’t fix my ceiling.
Scritto da: Javier Oscar Dorrego
????
????

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array