CURT 58260 4-poliger flacher Anhängerverkabelungs-Steckdosentester für Zugfahrzeuge, Originalversion

Brand:CURT

3.7/5

27.79

Ein Teil des verantwortungsvollen Abschleppens besteht darin, sicherzustellen, dass die Beleuchtung Ihres Anhängers ordnungsgemäß funktioniert. Unabhängig davon, ob Sie gerade einen neuen kundenspezifischen Kabelbaum installiert haben oder versuchen, die Ursache eines elektrischen Problems zu lokalisieren, eignen sich CURT-Steckertester hervorragend zum Testen von Rücklichtern, Blinkern, Bremslichtern, Masseverbindungen und anderen elektrischen Komponenten an Ihrem Fahrzeug. Ein Steckertester funktioniert, indem er in die Steckerbuchse Ihres Fahrzeugs eingesteckt wird und auf die verschiedenen elektrischen Signale reagiert, die durch das Betätigen des Bremspedals, das Signal zum Abbiegen, das Einschalten der Fahrlichter usw. erzeugt werden. Wenn die Steckdose ordnungsgemäß mit Strom versorgt wird, leuchten die verschiedenen LEDs des Testers entsprechend jedem Kabel im Stecker auf. Das Testen Ihrer fahrzeugseitigen Steckdose ist nach der Installation eines neuen maßgeschneiderten Fahrzeug-Anhänger-Kabelbaums unerlässlich und wird jedes Mal, wenn Sie einen Anhänger ankuppeln, dringend empfohlen. Wenn bei Ihrem Anhänger elektrische Probleme auftreten, kann Ihnen ein CURT-Tester außerdem sagen, ob das Problem im elektrischen System Ihres Fahrzeugs liegt oder ob eine Neuverkabelung Ihres Anhängers erforderlich ist. Alle CURT-Steckertester sind mit LED-Leuchten ausgestattet, die hell und langlebig sind. Drahttester sind für 4-polige Flachsteckverbinder, 5-polige Flachsteckverbinder, 6-polige Rundsteckverbinder und 7-polige RV-Flachsteckverbinder erhältlich. Dieser spezielle elektrische Tester passt in eine 4-Wege-Flachsteckdose und verfügt über eine hochwertige Kunststoffkonstruktion.

LANGLEBIGES GEHÄUSE. Um den Elementen zu widerstehen und eine zuverlässige Leistung zu gewährleisten, besteht das Gehäuse dieses Abschleppkabeltesters aus robustem schwarzem Kunststoff, der niemals rostet oder korrodiert. LANGLEBIGE LEDS. Um ein helles, gut lesbares Signal zu erzeugen und eine lange Nutzungsdauer zu gewährleisten, ist dieser Fahrzeug-Anhänger-Verkabelungstester mit LED-Dioden ausgestattet. EINFACHER GRIFF. Dank seines ergonomischen Designs lässt sich dieser 4-Flach-Anhängerlichttester ganz einfach an Ihr Fahrzeug anschließen. Es verfügt über eine Lasche an der Unterseite für einen besseren Halt beim Ein- und Ausstecken. EINFACH ZU BENUTZEN. Für jede elektrische Funktion leuchtet eine LED auf und zeigt ein gutes Signal an. Stecken Sie einfach den Kabeltester in die Steckdose Ihres Fahrzeugs und lassen Sie die LED-Signale von einem Helfer überprüfen, während Sie sie vom Fahrersitz aus aktivieren. VIELSEITIG. Bestätigen Sie mit diesem Steckertester für die Rücklichter, Bremslichter und Blinker schnell und sicher die Funktionalität des Anhängerkabelbaums Ihres Fahrzeugs. Passformtyp: Universelle Passform.
Assembly required No
Batteries required No
Brand CURT
Color Original Version
Country of Origin Taiwan
Customer Reviews 4.6 4.6 out of 5 stars 1,382 ratings 4.6 out of 5 stars
Department unisex-adult
Included Components 4-Way Flat Towing Wiring Tester
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 6 x 6 x 4 inches
Item model number 58260
Item Weight 0.352 ounces
Manufacturer Curt Manufacturing
Power Source Corded Electric
Product Dimensions 6 x 6 x 4 inches
Warranty Description One Year Limited

3.7

13 Review
5 Star
76
4 Star
16
3 Star
5
2 Star
1
1 Star
2

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: TOM S.
GREAT VALUE
Very affordable and quickly allows you to check the operation of your trailer harness connector operation. Arrived quickly with no packaging or instructions. However, it is plug and play. You plug into the vehicle end of the trailer wiring harness and you can test running lights, turn signals, brake lights and emergency flashers.
Scritto da: M & A
It does the job
Plugged it into the wire harness and turned on the turn signals and hit the brakes, the lights lit up like they’re supposed to. Super fast (1 day) delivery. Need this for the SUV and the RV. It would have been nice if it were packaged a little better. There was no packaging and it was tossed into an oversized padded envelope
Scritto da: MG
Works but…
Would it kill them to put a little L R on the case so you can see what is what.
Scritto da: MDJ
It works..
Good tool to use to know if your trailer wiring connection still works..
Scritto da: TP
Works perfectly
Works perfectly. Great, inexpensive way to test your trailer light socket. I'd give it 5 stars except, it comes with zero instructions or markings on the tester, as to what each light means but, there are plenty of reviews that explain this. Great little tester.
Scritto da: Yankee Sierra
So, which LED goes to which lamp?
This tester works, but it doesn't tell you which LED corresponds to which lamp. It would not have cost more money to mold a label for each function into the housing.
Scritto da: Andrew Kim
Cute Little Guy Plugs In and Works
Most of the curt trailer wiring does not come with a tester. So if you have to test it before attaching your trailer (u-haul, budget, home depot), then you're cutting it close if you need to do any repairs to your electrical wiring system. This exactly served it's purpose. During my move, I had shifted a lot of boxes and dislodged some of the electrical wiring. This little gadget helped me diagnose exactly where the problem was (loose electrical wiring with poor crimping) in the parking lot of my hotel. Having it was incredibly useful and doesn't take up a lot of space. This little guy is staying in my car as long as I still need to use a 4 pin connector for trailers and hitches. Value: 5/5 Usefulness: 5/5 Ease to install: 5/5 Would recommend to a friend who wants to test a working 4-pin connector, attaching wiring for 4-pin connector, or for anyone looking to put a trailer/hitch on in the near future.
Scritto da: CapeCod
Peace Of Mind
When You Know the trailer lights work.
Scritto da: The Dude
Works well. Indicators are easy to read
Contrary to some reviews the indicators for right and left for me are correct. It's very reasonably priced and handy to help troubleshoot trailer lights
Scritto da: RobertMTL
Easy to use
I installed my own hitch and wire harness, and this is a great tool to carry in the glove box and test your lights before hooking up the trailer.
Scritto da: DENIS
Very easy
very easy
Scritto da: Movienut
works
Tried it on a newly installed hitch wiring and everything worked well. Keep in my glove compartment.
Scritto da: Shaun
Great little tester
I am a mechanic and love these testers for diagnosing electrical problems with trailer connectors. Quick and simple with visual indicators. I does not allow you to load test the circuits or tell you if there is any show circuits but it is a quick indicator of problems. Many times I have had customer say that the trailer connector does not work and there lights don't come on when there trailer is plugged in. Takes one second to tell them it's not a problem with the car but there trailer.

Verwandte Produkte

hot

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array