CURT 56404 Fahrzeugseitiger kundenspezifischer 4-poliger Anhängerkabelbaum, passend für ausgewählte Audi Q5, schwarz

Brand:‎CURT

3/5

128.38

STAUBSCHUTZHAUBE. Um eine lange Nutzungsdauer und Witterungsbeständigkeit zu gewährleisten, wird dieser 4-polige Kabelbaum für die Anhängerbeleuchtung mit einer Staubschutzhülle aus Gummi geliefert. Bei Nichtgebrauch passt es problemlos auf den 4-Wege-Flachstecker und schützt ihn so vor Witterungseinflüssen. ZUVERLÄSSIGE KRAFT. Dieser 4-Wege-Anhängerkabelbaum ist mit Oberflächenmontagetechnologie ausgestattet. Diese Art von Schaltung erzeugt weniger Wärme, optimale Lichtintensität und dauerhafte Leistung. FAHRZEUGSPEZIFISCH. Dieser Aftermarket-Kabelbaum für Fahrzeug und Anhänger ist für ausgewählte Baujahre des Audi Q5 konzipiert. STANDARDANSCHLUSS. Diese steckbare 4-Flach-Anhängerverkabelung kann zum Anschluss von Anhängerrücklichtern, Bremssignalleuchten und Blinkern verwendet werden. Die 4-Wege-Verkabelung der Anhängerbeleuchtung ist bei einer Vielzahl von Anhängern beliebt und bietet vielseitige Anhängeroptionen für Ihr Fahrzeug. EINFACH ZU INSTALLIEREN. Kein Schneiden! Kein Spleißen! Dieses Anhängerkabelbaum-Set lässt sich in die vorhandene Werksverkabelung Ihres Fahrzeugs einstecken und stattet es mit einem standardmäßigen 4-poligen Anhängerverkabelungsstecker hinten zum Anschließen und Ziehen eines Anhängers aus.

STAUBSCHUTZHAUBE. Um eine lange Nutzungsdauer und Witterungsbeständigkeit zu gewährleisten, wird dieser 4-polige Kabelbaum für die Anhängerbeleuchtung mit einer Staubschutzhülle aus Gummi geliefert. Bei Nichtgebrauch passt es problemlos auf den 4-Wege-Flachstecker und schützt ihn so vor Witterungseinflüssen. ZUVERLÄSSIGE KRAFT. Dieser 4-Wege-Anhängerkabelbaum ist mit Oberflächenmontagetechnologie ausgestattet. Diese Art von Schaltung erzeugt weniger Wärme, optimale Lichtintensität und dauerhafte Leistung. FAHRZEUGSPEZIFISCH. Dieser Aftermarket-Kabelbaum für Fahrzeug und Anhänger ist für ausgewählte Baujahre des Audi Q5 konzipiert. STANDARDANSCHLUSS. Diese steckbare 4-Flach-Anhängerverkabelung kann zum Anschluss von Anhängerrücklichtern, Bremssignalleuchten und Blinkern verwendet werden. Die 4-Wege-Verkabelung der Anhängerbeleuchtung ist bei einer Vielzahl von Anhängern beliebt und bietet vielseitige Anhängeroptionen für Ihr Fahrzeug. EINFACH ZU INSTALLIEREN. Kein Schneiden! Kein Spleißen! Dieses Anhängerkabelbaum-Set lässt sich in die vorhandene Werksverkabelung Ihres Fahrzeugs einstecken und stattet es mit einem standardmäßigen 4-poligen Anhängerverkabelungsstecker hinten zum Anschließen und Ziehen eines Anhängers aus.
Brand ‎CURT
Country of Origin ‎Mexico
Customer Reviews 4.0 4.0 out of 5 stars 40 ratings 4.0 out of 5 stars
Item model number ‎56404
Item Weight ‎1.25 pounds
Manufacturer ‎CURT
Manufacturer Part Number ‎56404
Model ‎Custom Wiring
Product Dimensions ‎7 x 2 x 2 inches

3

8 Review
5 Star
56
4 Star
19
3 Star
5
2 Star
6
1 Star
14

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Irate B.
Install is not easy, but worth not having to splice wires
We moved from Atlanta to Vancouver, taking the scenic route (basically going straight west and then straight north). I put the hitch on my 2014 Audi Q5, and rented a U-Haul 4 x 8 trailer. I bought this wire harness kit thinking it would be a quick and easy install, but it was not at all. The instructions seem detailed, but I ended up watching a YouTube video that made the install a lot more obvious than the instructions did. A lot of trim had to be taken off to get to the taillights to then do the easy plug-in to the lights rather than the splicing other kits wanted me to do. The kit came with plenty of zip ties, but I opted for electrical tape like the video I was watching used. Once the install is complete, there is plenty of wire to the trailer connector, and once done with the trailer, the wire connector can be put away in the side panel in the hatch. The only other thing to note (the YouTube video mentions this) is if the hatch is open, the lights won't work on the trailer, so be sure to close the hatch before testing if the lights work properly. I am glad this is a one time installation, and was worth it to be able to pull a trailer legally.
Scritto da: SR
Fit my 2017 Q5 2.0 perfectly
Mounting the unit in the back left panel is the perfect location. I didnt need to modify any of the wiring. Get yourself a 6mm nut to attach the power wire to an empty post on the battery terminal.
Scritto da: Tom N.
Easy to install, works well.
Installing this harness took about 3 hours. Installation went without a hitch, but you have to be a somewhat experienced DIYer. I did vary from the instructions once by routing the wiring to the hatch door behind the C-pillar trim instead of along the weather stripping. Having the battery in the trunk made sourcing 12v power was a snap. While this harness doesn't disengage the backup assist system like the factory installation does, the backup camera continues to work aiding trailer placement. I placed the converter unit inside the back left access panel, attaching it to a metal bracket holding factory wiring, to which I also attached the ground wire. One niggle, perhaps caused by my rerouting the wiring is that the wiring inside the hatch is a bit tight, so take care to route that wiring to avoid hitting sharp edges.
Scritto da: Tom
Works excellent for 2 way trailer lights.
Installed in 2015 Audi Q5. Took about an hour, wasn’t too hard, but removing panels, rubber trunk gasket then reinstalling was hardest - use a panel tool (not screwdriver like me) & take your time so you don’t break any clips. Instructions with pictures were excellent, did view a YouTube video on removing hatch door inside trim just to be certain. Works excellent for simple 2 way four prong trailer lights, but if you have a travel trailer or something heavy, get an OEM trailer package install which will program system to adjust transmission shifting when plugged in among other things. Backup sensors will drive you nuts in reverse when trailer is attached, just turn them off on the front dash button. Excellent value, only thing I wish was different was about a foot longer trailer plug wire, routed from trunk thru hatch to trailer will just barely come out at hitch ball area - not an issue if you permanently mount plug underneath chassis.
Scritto da: Evan in Oregon
Much cheaper than factory part
It was a little more challenging to install in Audi than some cheaper cars but only because I didnt want to have any squeaks or rattles. Their instructions suck, as in bad photo copy so watch a vid on YouTube.
Scritto da: Elderbilly
Does not work with my vehicle!
I bought this to have the Uhaul installers put it on my vehicle. They said it didn’t fit. They called the Audi dealership and were told that Audi won’t support it. I’m thankful that I was able to return it .
Scritto da: ukpajf
Good product
This fit my 2015 Audi Q5 just right. Was a lot to take apart on the car but the wiring fit just right. Instructions, along with online install videos, were a big help and everything worked from the get-go.
Scritto da: Alex B
Stopped working
I have this productand it stipped working .power stays on to the right side when connected to a trailer, It has to be where the power comes from the harness. tried everything. Giving up. No one has suggestions.

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array