CURT 55326 Fahrzeugseitiger kundenspezifischer 4-poliger Anhängerkabelbaum, passend für ausgewählte Ford Crown Victoria, Ford Mustang, Mercury Grand Marquis, Schwarz

Brand:CURT

3.3/5

65.46

Wenn Ihr Fahrzeug nicht mit einer Verkabelung zum Ziehen eines Anhängers ausgestattet ist, ist die kundenspezifische Verkabelung von CURT die ideale Lösung. Ein kundenspezifischer Kabelbaum – auch T-Stecker genannt – ist ein einfaches Plug-and-Play-Elektrogerät, das an das elektrische System Ihres Fahrzeugs angeschlossen wird und eine standardmäßige, universelle Anhängerverkabelung bietet. Dies erfolgt über zwei oder mehr fahrzeugspezifische, OEM-kompatible Steckverbinder zum Einstecken in die Rücklichtbaugruppe, sodass beim Einbau kein Schneiden, Spleißen und Löten erforderlich ist. Kundenspezifische Kabelbäume werden fahrzeugspezifisch angefertigt und sind zwar nicht für alle Fahrzeuge erhältlich, bieten aber eine der schnellsten, einfachsten und sichersten Möglichkeiten, ein Fahrzeug zum Abschleppen zu verkabeln. Dieser spezielle Steckkabelbaum verfügt über eine 4-Wege-Flachsteckerbuchse und ist als maßgeschneiderter Kabelbaum für bestimmte Baujahre des Ford Crown Victoria, Ford Mustang und Mercury Grand Marquis konzipiert (Informationen zur Fahrzeugkompatibilität finden Sie in den Anwendungsinformationen). . Im Lieferumfang sind alle notwendigen Verkabelungskomponenten enthalten, um eine zuverlässige Anhängerverkabelung herzustellen, sowie eine Staubschutzhülle, um den Stecker sauber zu halten, wenn er nicht verwendet wird. Sie haben ein Bild von Ihrem nächsten Ziel im Kopf – vielleicht ist es die Bootsanlegestelle an Ihrem Lieblingsangelplatz, vielleicht ist es ein Campingplatz mit Blick auf eines der Meisterwerke der Natur, oder vielleicht ist es die nächste große Baustelle. Um dieses Bild in die Realität umzusetzen, bedarf es jedoch mehr als nur Tagträumen. Es braucht eine solide Verbindung und die richtige Menge an Leistung. Die kundenspezifische Verkabelung von CURT wird mit einer der fortschrittlichsten Technologien der Branche hergestellt und ist so konzipiert, dass sie einfach installiert werden kann, sodass Sie eine langlebige elektrische Verbindung für Ihre Anhängerkupplung erhalten.

STAUBSCHUTZHAUBE. Um eine lange Nutzungsdauer und Witterungsbeständigkeit zu gewährleisten, wird dieser 4-polige Kabelbaum für die Anhängerbeleuchtung mit einer Staubschutzhülle aus Gummi geliefert. Bei Nichtgebrauch passt es problemlos auf den 4-Wege-Flachstecker und schützt ihn so vor Witterungseinflüssen. EINFACHER GRIFF. Dank des ergonomischen Designs dieser Fahrzeugsteckdose ist das Anschließen Ihrer Anhängerverkabelung und Anhängerbeleuchtung ganz einfach. Es verfügt über Laschen an der Ober- und Unterseite für einen besseren Halt beim Ein- und Ausstecken in Ihren Anhänger. FAHRZEUGSPEZIFISCH. Dieser Aftermarket-Kabelbaum für Fahrzeug und Anhänger ist für ausgewählte Baujahre des Ford Crown Victoria, Ford Mustang und Mercury Grand Marquis konzipiert. STANDARDANSCHLUSS. Diese steckbare 4-Flach-Anhängerverkabelung kann zum Anschluss von Anhängerrücklichtern, Bremssignalleuchten und Blinkern verwendet werden. Die 4-Wege-Verkabelung der Anhängerbeleuchtung ist bei einer Vielzahl von Anhängern beliebt und bietet vielseitige Anhängeroptionen für Ihr Fahrzeug. EINFACH ZU INSTALLIEREN. Kein Schneiden! Kein Spleißen! Dieses Anhängerkabelbaum-Set lässt sich in die vorhandene Werksverkabelung Ihres Fahrzeugs einstecken und stattet es mit einem standardmäßigen 4-poligen Anhängerverkabelungsstecker hinten zum Anschließen und Ziehen eines Anhängers aus.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.2 4.2 out of 5 stars 44 ratings 4.2 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 2 inches
Item model number ‎55326
Item Weight 0.49 Pounds
Item Weight ‎7.8 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎55326
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎55326
Product Dimensions ‎9 x 4 x 2 inches

3.3

9 Review
5 Star
60
4 Star
20
3 Star
10
2 Star
0
1 Star
10

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Romy
Easy to install, but the finished install is jank
Super easy to install, instructions are included but you basically just piggyback this into your rear lights. I think it took like 10 minutes on my 97 Crown Vic. It helps to have some sort of trim removal tool to pop off the plastic clips Ford used to hold the trunk trim up with. It works fine, didn't have to rewire it like some other folks said. Biggest issue I have (which is why it's 4 stars) is that it stays in your trunk until you need it. Like, loose in the trunk. The instructions say something with the gist of 'just sort of tuck it up out of the way someplace.' When you want to use it, you pull it out of the trunk, hook it up to the trailer, and just kind of close the trunk lid on the wires. It's not like the fit and finish on a mid-90s Ford makes this problematic (the wires don't get pinched at all), but it's just jank. They could have routed it through a body plug or something similar (albeit the wires are too short to go through any of the stock body plugs). I'll eventually properly mount this outside the car, but it's going to be a PITA since the connectors will have to be depinned, a hole will need to be drilled, and I'll need to route it all through a grommet that fits said hole. Totally doable, but it's going to take more than 10 minutes.
Scritto da: WEH
Works great!
Fits perfect on my 1995 mustang.
Scritto da: John T. Ertz
Easy to plug in, but was wired wrong.
Very simple to install as stated in the instructions, but as soon as I tested my lights my left signal started flashing fast as though a bulb was burned out, but it was also flashing the side marker light. Disconnected harness and all returned to normal. Broke out test lamp and found that the harness wires from this unit had been improperly placed. In the female connector that plugs to the vehicle wire harness, the Yellow (signal) wire is in the top right, with the Brown (marker lamp) wire in the bottom right. However on the male plug that goes to the taillight and sidemarker, the Yellow and Brown wires are reversed so that the Stop/Turn wire is trying to feed the side marker and the Brown side marker wire is trying to feed the Stop and Turn function. Might want to check that quality control at your Mexican plant and make sure the assembler isn't color blind...
Scritto da: IntoxicatedRedneck
Works
Arrived this evening, I was nervous to open anything from the mail at this point. However, I needed to go pick up my S-10, so I opened it up and found out the harness was real easy to install. I put this in my 96 Mercury Grand Marquis, it basically just snaps into the back of the tail light plugs on the both sides. Takes a minute, hooked up my car trailer, everything worked like it should. Picked up my truck, came back home, everything still works. Its a gud buy.
Scritto da: Yooper-in-gb
Curt 55326 wire harness
This device does not fit a 2004 Mercury Grand Marquis LS as stated on the Amazon parts selector. It only works up to 1997. Curt harness #58044 is for later models and must be spliced in. This(55326) harness just plugs in and looks like a great way to put on a trailer plug. I am sure it works great on the correct model cars. Note for Curt Mfg. - Amazon does NOT download directly from Curt what parts fit each model, so check the Curt site first for compatibility.
Scritto da: joshua
Nice
Work perfectly for mustang 94 convertible V6
Scritto da: Louis c.Brown jr.
Four Stars
thank u
Scritto da: David Plowman
Five Stars
I have not used it yet but think it well work
Scritto da: Amazon Customer
Great price
Quick and easy install

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array