CURT 51362 Schnellstecker-Kabelbaum für elektrische Anhängerbremssteuerung, ausgewählte Toyota 4Runner, Land Cruiser, Sequoia, Tacoma, Tundra, Lexus GX, LX, Schwarz

Brand:‎CURT

3.7/5

41.13

Brasilianische Polyester-Hängematte

GESCHÜTZTE KABEL. Um den Stromfluss aufrechtzuerhalten und sicherzustellen, dass Ihre Verbindung gut geschützt bleibt, ist dieser Kabelbaum für die Bremssteuerung des Anhängers mit einer geschlitzten Kabelbaumhülse ausgestattet, die dabei hilft, die Drähte gebündelt zu halten, Quetschungen zu vermeiden und Abrieb zu widerstehen. VIELSEITIGER EINSATZ. Dieser Verkabelungssatz für die Anhängerbremssteuerung ist mit allen CURT-Anhängerbremssteuerungen kompatibel, die mit einem Schnellsteckverbinder ausgestattet sind – Proportional-, Trägheits- und Zeitverzögerungssteuerung. Es verfügt außerdem über eine Länge von 24 Zoll für eine flexible Positionierung. FAHRZEUGSPEZIFISCH. Diese elektrische Bremssteuerungsverkabelung passt für ausgewählte Modelljahre des Toyota 4Runner, Land Cruiser, Sequoia, Tacoma, Tundra, Lexus GX460, GX470, LX470 und LX570. ZUVERLÄSSIGE KRAFT. Dieser Kabelbaum für die Bremssteuerung besteht aus hochwertigen 12-Gauge-Kabeln, um eine gleichmäßige Stromversorgung zwischen der Bremssteuerung Ihres Anhängers, dem Fahrzeug und den elektrischen Anhängerbremsen sicherzustellen. EINFACH ZU INSTALLIEREN. Kein Schneiden oder Spleißen erforderlich! Dieser fahrzeugspezifische Kabelbaum ermöglicht eine schnelle, einfache Plug-and-Play-Installation des Anhängerbremssteuergeräts. Stecken Sie einfach ein Ende in Ihr Fahrzeug und das andere in Ihren CURT-Bremscontroller. Passformtyp: Fahrzeugspezifisch.
Brand ‎CURT
Country of Origin ‎Mexico
Customer Reviews 4.6 4.6 out of 5 stars 258 ratings 4.6 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item model number ‎51362
Item Weight ‎2.08 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎51362
Model ‎Brake Ctrl Harness
OEM Part Number ‎51362
Product Dimensions ‎26 x 1 x 1 inches

3.7

13 Review
5 Star
80
4 Star
12
3 Star
3
2 Star
1
1 Star
4

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Joe
Plug and Play
Got this for my trailer controller. I used it on a 2006 crew cab Tundra 4wd. This plugged right into the trucks system already and then into the controller. Easy as that, no modification or thinking required. I recommend.
Scritto da: mike
Worked great but I wish it was 4 inches longer.
I forgot to take photos. Very easy to install in my 2006 Tundra. Made it easier to route by pulling the lower dash panel, just 4 bolts. 2006 Tundra and forward have the option for a brake controller built into the wire harness. It's under the driver side kick panel. Needed to remove the door sill plastic plate to get the kick panel off. Another 4 inches would have been handy. I tucked the Curt harness up a little further than most people might so might not be a problem for others.
Scritto da: Justin
Cake
Simple and clean
Scritto da: James MellingerJR
Works
Works
Scritto da: Amanda Finch
Order the 51363 part
I double checked Curt’s website for the correct part number for my 2011 Toyota Tundra. Both the 51362 and the 51363 part numbers fit. They are the same piece but the 51362 is cheaper because it appears to be a bulk order for the seller. 51363 is a single piece order and comes in an individual case. When I ordered the 51362 the part number matched on the outside bag but the part number on the actual cord did not match and it didn’t fit my truck. So I returned the 51362 and ordered the 51363 and I had no issues with the 51363. Spend the extra couple of dollars and get the 51363 to ensure you receive the correct part for your vehicle.
Scritto da: David P.
Don’t hesitate to buy this.
Used this to add a trailer brake controller to my 2019 4Runner Limited 4x4. Easiest install I’ve had in 40 years. Plug and play, no splicing. I never knew there was a factory plug below the dash to add trailer brakes.
Scritto da: BS AZ
Fit perfectly in my Lexus.
This fit perfectly into the factory brake controller harness in my 2004 Lexus GX. I hooked it up to one of the more basic controller units from Curt and mounted it all up under the dash. I was able to stash the excess length of the harness up under the panel under the steering column with no issues. It's nice that these companies make these things so it's just a plug and play install without having to mess around with a bunch of wiring.
Scritto da: Patrick M.
Perfect fit
Perfect fit
Scritto da: Derek Peck
Inexpensive and does the job
Really helps connect to the car 7 zone brake controller already installed in vehicle to the actual brake controller , making it easy to install other move around .
Scritto da: RANDAL J. EPP
Easy
Easy to install worked great
Scritto da: Northerner
Work perfectly. Could use to be a bit longer to allow more mounting options
Works just as expected. Turned a potentially nightmarish job of wiring in the brake controller into a 5 minute job.
Scritto da: Amazon Customer
2003 Toyota Tundra brake controller harness
Arrived quick and installation was easy. Just need the 7 wire plug mounting plate for the factory hitch and we will be ready to tow. Thanks Amazon!
Scritto da: Amazon Customer
As advertised
Fit as advertised - no issues

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array