Cubitron II Scotch-Brite großflächige Streifenentfernungsscheibe – großes Radierrad – entfernt Vinyl-Aufkleber, Grafiken und Streifenbänder von Metall – 8' x 5/8' – 7517

Name: Cubitron II Scotch-Brite großflächige Streifenentfernungsscheibe – großes Radierrad – entfernt Vinyl-Aufkleber, Grafiken und Streifenbänder von Metall – 8' x 5/8' – 7517
Brand: Cubitron
Price: 205.90 EUR
Availability: InStock

Brand:Cubitron

3/5

€
205.90

Das in Italien entworfene und gefertigte Persol – vom italienischen Wort „per il sole“ für „Sonne“ – ist aufgrund seiner tadellosen Passform und unglaublichen Klarheit bei Geschmacksmachern und Prominenten beliebt. Die patentierten Meflecto-Bügel der Marke bieten einen sicheren Sitz, während kristallgehärtete Sonnenbrillengläser Schutz und verzerrungsfreie Sicht bieten. Mit einem Markencharakter, der am besten als edel, exklusiv, stilvoll und einzigartig beschrieben werden kann, geht Persol weiterhin über Trends hinaus.

Menge

in den Warenkorb legen Kaufe jetzt

EAN:

Kategorien Werkzeuge & Heimwerken, Industrie & Wissenschaft, Farbe, Wandverkleidungen & Zubehör, Malerbedarf & Werkzeuge, Klebeband, Klebeband,

Das Schleifmittel poliert die Metalloberfläche, ohne zu ritzen oder zu schleifen, wodurch die Wahrscheinlichkeit einer Beschädigung der Oberfläche verringert wird. Durch die gestapelte Waferkonstruktion können größere Oberflächen abgedeckt werden. Kann mit tragbaren Handwerkzeugen verwendet werden. Die Scheibe erzeugt beim Drehen Wärme, wodurch die Notwendigkeit von Vorbereitungsarbeiten mit Wärmewerkzeugen minimiert wird. Polyvinylchlorid (PVC) ist langlebig und hält wiederholter Reibung stand, um unerwünschte Abziehbilder effektiv zu entfernen. Entfernt effektiv unerwünschte Vinyl-Aufkleber, Grafiken und Streifenbänder von Metalloberflächen. Das Schleifmittel poliert die Metalloberfläche, ohne zu ritzen oder zu schleifen, wodurch die Wahrscheinlichkeit einer Beschädigung der Oberfläche verringert wird. Durch die gestapelte Waferkonstruktion können größere Oberflächen abgedeckt werden. Kann mit tragbaren Handwerkzeugen verwendet werden. Die Scheibe erzeugt beim Drehen Wärme, wodurch die Notwendigkeit von Vorbereitungsarbeiten mit Wärmewerkzeugen minimiert wird. Polyvinylchlorid (PVC) ist langlebig und hält wiederholter Reibung stand, um unerwünschte Abziehbilder effektiv zu entfernen. Entfernt effektiv unerwünschte Vinyl-Aufkleber, Grafiken und Streifenbänder von Metalloberflächen.

Brand	Cubitron
Compatible Devices	Die Grinder
Construction Type	Coated
Country of Origin	USA
Domestic Shipping	Item can be shipped within U.S.
Grit Number	60
International Shipping	This item can be shipped to select countries outside of the U.S.
Item Diameter	8 Inches
Item model number	07517
Manufacturer	3M
Package Dimensions	9.4 x 9.3 x 3.3 inches; 1.9 Pounds

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: K M

Pretty effective, but you need to get the angle ...

Pretty effective, but you need to get the angle exactly right for maximum effectiveness. Also, quite a forearm workout, as pretty firm,accurate pressure is needed to remove boat decals.

Scritto da: Scott Hassan

Soesnt co.e with needed adapter which is t avaable on amazon

No way to use it as the adapter to use on a buffer does not come with it, nor is it available from Amazon or anywhere on Google. Kind of bs from a product made by 3m.

Scritto da: patrick

Removes Vinyl Decals, Graphics, and Striping Tapes quickly without damaging the paint finish.

The media could not be loaded. I needed to remove signage on a 13-year-old box truck with a lot of sun-baked on cracked vinyl due to the hot climate in the Bahamas. I purchased 2 Scotch-Brite Eraser Wheels on Amazon for $79.98ea and 2 heat guns to test which product works best. After using both vinyl removal systems, heat guns make quick easy work of removing vinyl from fiberglass box trucks. However, a heat gun is almost useless if the vinyl is very old, cracked, and sun-baked on after many years. You will need a Scotch-Brite Large Area Stripe Removal Disc - Large Eraser Wheel. They work fantastic for removing vinyl but do require some work as holding a grinder machine quickly becomes very laborious. There is also a little bit of a learning curve to using the Scotch-Brite eraser wheel. The secret is to apply as little pressure as possible and finding the "sweet-spot" angle of attack when removing vinyl. It is important to just allow the eraser wheel to barely, but firmly, touch the working surface. Too much pressure with the wrong angle and the tool becomes too difficult to control and literally runs away from you. Expect to get totally covered in vinyl bits and dust as well. So be sure to have proper eye protection, and face masks on hand before starting your project. My synopsis is, having both heat gun and Scotch Brite vinyl eraser products is absolutely essential for bigger vinyl removals projects, as they perform different tasks when removing vinyl lettering, decals, and graphics.

Scritto da: Justin Maulkeet

Best decal removal tool on the market

This product is also referred to as 3M LASR Disk. It works in combination with a standard powered rotary buffer such as https://www.amazon.com/Makita-9237CX3-Variable-Polisher-Sander-Polishing/dp/B00OKEDW0M/ref=sr_1_1?ie=UTF8&qid=1465598799&sr=8-1&keywords=makita+buffer which is what I purchased for the job. It does require an adapter nut, which I purchased at my local detailer supply shop the first time I bought one of these disks. Amazon sells it for about the same as that suppliers "wholesale" cost. If you need to remove striping, lettering, or decals off of the metal of vehicles, this is THE tool to use. It pulls the vinyl and adhesive off in short time. On fiberglass or gelcoat such as boat or motor home it does the same thing but requires additional work. You must keep the tool moving so you dont burn the gelcoat. I do not recommend its use at all on fiberglass/gelcoat if you are not covering back up with new graphics/striping for this reason. Just about every decal I remove on Rv's is being replaced with new decals so not a big deal. In that case remove from the middle out and leave the last 1/4" of vinyl at the edge just in case you burn it a little. Remove the last little bit using scrubbing bubbles bathroom cleaner https://www.amazon.com/Scrubbing-Bubbles-Antibacterial-Bathroom-Cleaner/dp/B00HY51IIM/ref=sr_1_1_s_it?s=hpc&ie=UTF8&qid=1465599245&sr=1-1&keywords=scrubbing+bubbles to soften the vinyl and a good razor scraper being very careful. Wipe off any excess cleaner before it dries since it leaves a crusty residue. If you get any residue, just respray it and wipe. To remove any remaining adhesive use Rapid Remover https://www.amazon.com/REMOVER-Adhesive-Remover-Graphics-Stripes/dp/B006RUJ2D8/ref=sr_1_3?ie=UTF8&qid=1465599350&sr=8-3&keywords=rapid+remover make sure to wear gloves. Oh speaking of safety using a face mask will become obvious to you in the first minute. It sprays particles of torn off vinyl back at you as it tears them off. I either wear goggles with a dust mask or a full shield when working depending on the outdoor conditions. The UVEX mask is nice https://www.amazon.com/dp/B001VXXUWK/ref=wl_it_dp_o_pC_nS_ttl?_encoding=UTF8&colid=2NJ9BR096AWLR&coliid=I2XRMA3HOMJFXR

Scritto da: Allen M

Works Great, Stick to RPM

Works very well but really pay attention to the RPM. Too fast and it will come apart and hurt you. I have a couple of bruises to prove it ????

Scritto da: Kindle Customer

Additional part needed

This item is not usable as sold. The type tool needed to use this disc is a side grinder/polisher. You will need an adapter. It is not available. That part has been discontinued. I was able to find one through another vendor at an additional cost to me. After you get the adapter and get it attached to the tool, the disc does take off strips but wears out quickly.

Scritto da: reader

Great eraser wheel

This item worked great to remove the old decals from my RV. I used it with the cheap car polisher from Harbor Freight. I had to get a 5/8 rod nut to connect the two items. Removed all decals from my 31 foot RV so it saved me money when I had new decals installed.

Scritto da: Pat McGroin

To use this product go to Home Depot or some ...

To use this product go to Home Depot or some other hardware store a simple 5/8" -11 x2 1/8 coupling nut is what I used to "adapt" it to my mikita sander polisher. Additional cost $2.16, plus the walk three aisles over from the acetone that I needed to remove the residual glue from my rv.