Briggs & Stratton 692093 Ölmessstabrohr-Ersatz für die Modelle 807501, 807611 und 692093

Brand:Briggs & Stratton

3.2/5

54.91

Entwickelt für den Fall, dass Pflegekräfte längenverstellbare Gurte mit Polstern benötigen, um den Patienten Komfort zu bieten. Die Gurte sind aus zuverlässigem und robustem Nylongewebe gefertigt, um den Komfort und die Sicherheit des Patienten zu maximieren. Erhältlich als Extremitätenmobilisierungsset, oder Sie können jeden der drei Artikel einzeln kaufen, wenn Sie nur einen oder zwei davon benötigen. Der Gurt ist 5 cm dick. Befestigen Sie den Mobilisierungsgurt der Extremitäten um die Taille, um seitlichen Halt zu gewährleisten. Hilft bei Bedarf, den Patienten an der Behandlungsliege zu befestigen, damit das medizinische Fachpersonal den Patienten ordnungsgemäß versorgen und ihn schützen kann.

Keine Einheiten verfügbar
Entwickelt für den Fall, dass Pflegekräfte längenverstellbare Gurte mit Polstern benötigen, um den Patienten Komfort zu bieten. Die Gurte sind aus zuverlässigem und robustem Nylongewebe gefertigt, um den Komfort und die Sicherheit des Patienten zu maximieren. Erhältlich als Extremitätenmobilisierungsset, oder Sie können jeden der drei Artikel einzeln kaufen, wenn Sie nur einen oder zwei davon benötigen. Der Gurt ist 5 cm dick. Befestigen Sie den Mobilisierungsgurt der Extremitäten um die Taille, um seitlichen Halt zu gewährleisten. Hilft bei Bedarf, den Patienten an der Behandlungsliege zu befestigen, damit das medizinische Fachpersonal den Patienten ordnungsgemäß versorgen und ihn schützen kann.
Brand Briggs & Stratton
Color multi
Country of Origin Japan
Customer Reviews 4.2 4.2 out of 5 stars 67 ratings 4.2 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 7.75 x 2.25 x 1.4 inches
Item model number 692093
Item Weight 0.05 Pounds
Item Weight 0.8 ounces
Manufacturer Briggs & Stratton
Material Plastic
Product Dimensions 7.75 x 2.25 x 1.4 inches

3.2

8 Review
5 Star
63
4 Star
15
3 Star
8
2 Star
5
1 Star
9

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Dan T.
Perfect fit for Vanguard 16HP
I accidentally broke the original tube on my old 30 year old tractor when I replaced the starter gear. This was a perfect fit.
Scritto da: Prime member CM
Interesting design change
This one does not have the screw mount tab at the bottom, which seemed to contribute to cracking the base when flexed while removing the blower housing. With the bottom O-ring seal and the mounting at the top of the oil tube, it isn't necessary to bolt the bottom.
Scritto da: W. Newsom
The superseded part for Briggs 807611 is not a match
I am not too happy about the item that just arrived. Yep, it fit. Yes, it's the "right" part that Briggs wants to use for my mower. But the original 807611 had a spot for a second bolt down at the engine. I think this is a poor substitution, but it's all I can expect to fix an old Craftsman mower. I gave it 5 stars because my complaints aren't the parts' fault or the seller's. Briggs gets a 1 star, the part gets a 5 star. Two O-rings are included. 692093 is Made in Japan. UPC 024847235050
Scritto da: Eddie 70
I bought this because my stock tube was leaking oil ...
I bought this because my stock tube was leaking oil all over my engine and dripping on the garage floor also. This was not an exact replacement but it is very close and so far my engine has not leaked a drop in over 5 hours of mowing this 2018 spring. I have a Simplicity Broadmoor with a Briggs and Straton Vanguard 18HP V twin engine. The stock dipstick has a place for a bolt at the bottom and this one does not. Otherwise this is the same except no leaks!!
Scritto da: Shaun
My personal experience.
Product is not exactly what original was, but it is the replacement part that is produced now. Briggs has cheapened them up. O-ring did not seal at first. Watch for oil leaks after installation. You may need to get a different o-ring.
Scritto da: Amazon Customer
New design works on the old Motors
I wish it had the bolt hole at the base like the original from my 1997 Briggs & Stratton 16 hp V-twin Vanguard, but it didn't leak and fit right up.
Scritto da: DTB73
Works
It fit good on the lawn mower.
Scritto da: Timmy B
Great replacement
East to install and direct replacement

Verwandte Produkte

hot

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array