Azar Plastic 800002-B 2-Zoll-Lexan-Stecktafelhaken, Schwarz, 50er-Pack, 2 Zoll 2 Zoll Schwarz

Brand:Azar Displays

3.6/5

42.37

Azar-Haken zum Aufhängen von Stecktafeln können hervorragend in jedem Einzelhandels- oder Geschäftsumfeld eingesetzt werden. Verwenden Sie diese praktischen Haken zum Aufhängen von steckbaren Produkten an Ihrer Stecktafelwand oder verwenden Sie die Wandhaken mit jedem der freistehenden Stecktafel-Boden- und Thekendisplays von Azar. Unser Mehrzweckhaken aus Polycarbonat mit einem Durchmesser von 0,287 Zoll besteht aus langlebigem, starkem Polycarbonat-Kunststoff. Dieses Stecktafelzubehör hält im Einzelhandel, im Geschäft oder zu Hause jahrelang. Wir führen auch 4 Zoll und 6 Zoll lange Haken für Steckbretter. Die Klammerhaken sind in transparent, schwarz oder weiß erhältlich. Die Klammerhaken von Azar für Stecktafeln haben eine attraktive glänzende Oberfläche. Der Durchmesser beträgt 0,287 Zoll. Die Rückplatte misst 1 Zoll B x 1,375 Zoll H. Unser Heringshaken wird in den USA hergestellt. Diese Haken eignen sich hervorragend für jeden Einzelhändler, der nach einer einfachen und effektiven Möglichkeit sucht, eine stilvolle Präsentation zu gestalten. Die 2-Zoll-Heringe bestehen aus einer Zinke und einem kleinen Noppen, der den Haken an Ort und Stelle fixiert und für dauerhafte Haltbarkeit sorgt. Sie passen an eine Standard-Steckwand mit Löchern mit einem Durchmesser von 0,25 mm und einem Loch in der Mitte. Beim Kauf erhalten Sie 50 Stecktafel-Wandhaken in einer Packung. Diese vielseitigen Wandhaken sind ideal für eine Vielzahl von Arbeitsumgebungen, darunter Einzelhandel, Büro, Zuhause und mehr. Klicken Sie auf „In den Warenkorb“, um noch heute Ihre Packung mit 50 Azar-Klammern für Stecktafeln zu kaufen! Produktdetails: Packungsinhalt: 50 Haken Teilenummer: 800002-BArtikelgewicht: 0,0147 UnzenArtikelabmessungen: 2 x 1 x 1,375 Zoll

✅50ER-PACK – Diese in den USA hergestellten 2 Zoll langen, geraden Wandhaken für Stecktafeln werden in Packungen mit 50 Stück verkauft. Wir führen auch 4 Zoll und 6 Zoll lange JPEG-Haken. Die Wand-Organizer-Haken für Stecktafeln sind in transparent, schwarz oder weiß erhältlich. ✅ATTRAKTIV – Jeder 2 Zoll lange Stecktafelhaken aus Polycarbonat verfügt über eine glänzende Oberfläche, um im Einzelhandel, zu Hause, in der Garage oder im Büro für einen sauberen, organisierten Look zu sorgen. ✅VIELSEITIG – Verwenden Sie diese J-Haken für Stecktafeln zum Aufhängen von steckbaren Produkten an Ihrer Standard-Stecktafelwand. Oder verwenden Sie die Präsentationshaken mit einem der freistehenden Stecktafel-Boden- oder Theken-Spinner-Displays von Azar. ✅STARK UND LANGLEBIG – Die 2-Zoll-Stecktafelhaken aus Polycarbonat von Azar sind robust und langlebig. Die Stecktafelhaken aus Kunststoff haben eine Zinke und eine kleine Noppe, die den Haken einrastet. ✅ ¼-Zoll-Stecktafel – Sie können diese geraden Stecktafelhaken mit einem Durchmesser von 0,287 verwenden, um Ihre Produkte mit großer Wirkung auf einer standardmäßigen ¼-Zoll-Stecktafel mit 1 Loch in der Mitte zu präsentieren. Der Kunststoffhaken ist ideal für jeden Einzelhändler, der eine einfache und effektive Möglichkeit sucht, eine stilvolle Präsentation zu gestalten. Diese Stecktafelnägel sind nicht für Lamellenwände geeignet.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Azar Displays
Brand ‎Azar Displays
Color Black
Color ‎Black
Country of Origin ‎USA
Customer Reviews 4.5 4.5 out of 5 stars 1,528 ratings 4.5 out of 5 stars
Finish ‎Shiny Finish
Finish Type Shiny Finish
Finish Type ‎Shiny Finish
Included Components ‎1
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎2 x 1 x 1 inches
Item model number ‎800002-B
Item Package Quantity ‎1
Item Weight ‎0.93 Pounds
Item Weight ‎14.9 ounces
Manufacturer ‎Azar Displays
Material Plastic, Polycarbonate
Material ‎Plastic, Polycarbonate
Maximum Weight Recommendation ‎47 Ounces
Mounting Type Wall Mount
Mounting Type ‎Wall Mount
Number of Hooks ‎50
Part Number ‎800002-B
Product Dimensions ‎2 x 1 x 1 inches
Size ‎2 Inch
Style ‎Retail

3.6

13 Review
5 Star
76
4 Star
11
3 Star
6
2 Star
3
1 Star
4

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet*

Scritto da: Chelsea K.
Sturdy, easy to install, easy to remove
They’re longer than the ones that came with the display, which is neutral to me but important to note for many products (mine are mostly flat so I don’t need much space but can always use it if I have it). They install with relative ease, some require a bit more pressure to pop in place and back out as well. I have had none break or cause damage to the displays, so 5* from me unless that changes!
Scritto da: Person
look good but didn't fit standard pegboard holes
busted up the hole trying to put these in. need to enlarge holes for these to fit properly. PITA.
Scritto da: JANET STAFFORD
PEGS
I got an Azar spinner few years back, and these peg hooks were a bit thick to use.
Scritto da: Marion
Works Like A Charm!
Received these well packaged. All pieces in good condition; none broken. They are very sturdy and work well on a standard pegboard. I bought these because they are retail grade and made in the USA. Excellent product. I highly recommend it.
Scritto da: C. Anderson
Got to lean on them a little
If your not a crafts person you might send these back because they don’t magically snap in. You need to finesse them a little, lean on them a little. They take me about 15 seconds or so per clip to install, but they are solid, no play once secured. No play it usually the thing you want in a variety of areas in life.
Scritto da: Andrew Sebastiano
Pegboard hooks
They are super tight on some of the pegboards. But when they work, they work well.
Scritto da: Kristine
Have to return bc my display came with some, but great hooks
Will do business again. These are great
Scritto da: William Nelson
Tight Fit
These strong, plastic hooks are designed to fit securely in peg board. They stay in place when removing objects from the hook and they fit in successive holes to maximize space!
Scritto da: TR
Perfect for standard merchandising display needs
I purchased it for my sister who sells jewellery and wanted to build jewellery display cases which she takes at her stalls at various events. Her jewelry is pretty light weight and these worked perfectly for that application. They seem to be sturdy enough for standard merchandising needs. The plastic is sturdy but brittle as well so won’t take much impact. I would not use them for heavy items but they should be okay for items under a pound. Unlike metal pegs, they don't rust. I easily installed them into 1/4" pegboards and they are long enough to hang most objects.
Scritto da: Ginny B
Sturdy
I ended up returning these Theres a little nub thing near the bottom and the 2 pieces were not the same distance as the holes on my board
Scritto da: Emily
They fit in pegboards
I was a little skeptical about if it would fit into the circular little leg holes most, if not all, peg boards have. But they fit wonderfully. They are sturdy and the perfect length for what I need.
Scritto da: steve
not as great as the screw in type ones I would think
They bite into the pegboard surprisingly well, not as great as the screw in type ones I would think, but infinitely better than normal hooks, that hold with nothing but gravity. It seems like such a first world problem but I hate when the hook style hooks ever so slightly touch the tool during removal and they fall off the board lol. I will definitely be buying more of these, not just for myself but for friends and family
Scritto da: sonia
Vraiment stable après fixation
J’aime vraiment ces crochets, seul chose, j’ai finalement acheté un peu plus long de la même compagnie mais ça c’est selon l’utilisation qu’on en fait, je recommande fortement

Verwandte Produkte

Entdecken Sie unser internationales Netzwerk

Wir versenden in 28 Länder, über 200.000 Produkte. Bleiben Sie auf dem Laufenden, abonnieren Sie den Newsletter.

Array