3M 2228-1X10FT 054007507277 1x10 Rubb Mastixband, 1x10FT

Name: 3M 2228-1X10FT 054007507277 1x10 Rubb Mastixband, 1x10FT
Brand: 3M
SKU: 0054007507277
Price: 40.53 EUR
Availability: InStock

Brand:3M

3.8/5

€
40.53

Das Scotch Rubber Mastic Tape 2228 ist ein anpassbares, selbstverschmelzendes Elektroisolier- und Dichtungsband aus Gummi, das aus einem Träger aus Ethylen-Propylen-Kautschuk (EPR) besteht, der mit einem aggressiven, temperaturstabilen Mastixklebstoff beschichtet ist. Dieses Klebeband hat eine Dicke von 65 mil (1,65 mm) für einen schnellen Anwendungsaufbau. Es ist für elektrische Isolier- und Feuchtigkeitsabdichtungsanwendungen konzipiert. Es handelt sich um eine UL-anerkannte Komponente für Anwendungen bis 130 °C. Es bietet eine hervorragende Beständigkeit gegen Feuchtigkeit und UV-Strahlung und ist sowohl für Innen- als auch für wetterexponierte Außenanwendungen vorgesehen. Scotch Rubber Mastic Tape 2228 sollte in halb überlappten Schichten aufgetragen werden, bis der gewünschte Isolationsaufbau erreicht ist. Dehnen Sie das Band während der Anwendung auf 3/4 seiner ursprünglichen Breite, um eine gute Anpassungsfähigkeit und eine feuchtigkeitsdichte Abdichtung zu gewährleisten. Scotch Rubber Mastic Tape 2228 sollte zum mechanischen Schutz mit zwei halb überlappten Lagen Scotch Super 33+TM Vinyl-Isolierband umwickelt werden.

Menge

in den Warenkorb legen Kaufe jetzt

EAN: 0054007507277

Kategorien Industrie & Wissenschaft, Klebstoffe, Dicht- und Schmierstoffe, Klebebänder, Elektroband,

Flammhemmend. Dicke Konstruktion für zusätzliche Polsterung. Hervorragende feuchtigkeitsabweisende Eigenschaften. Professionelle Qualität. Nur für den industriellen/beruflichen Gebrauch. Nicht für den Verkauf oder Gebrauch durch Verbraucher bestimmt. STABILITÄT: 5 Jahre Haltbarkeit (ab Herstellungsdatum). KONFORMITÄT: UL-anerkannte Komponentenliste darf 266 °F (130 °C) nicht überschreiten, Produktkategorie OANZ2 und 3M-Aktennummer E17385; RoHS-konform. BETRIEBSTEMPERATUR: Die elektrischen Eigenschaften sind bis zu 130 °C (266 °F) stabil. WITTERUNGS- UND FEUCHTIGKEITSBESTÄNDIGKEIT: Feuchtigkeitsabdichtung für Kabel- und Drahtverbindungen. PRIMÄRE ELEKTRISCHE ISOLIERUNG FÜR: Kabel- und Drahtverbindungen und Vibrationspolsterung für Motorleitungen mit einer Nennspannung von bis zu 1000 Volt. ANPASSBAR ÜBER UNREGELMÄßIG GEFORMTE VERBINDUNGEN: Die dicke Konstruktion ermöglicht einen schnellen Anwendungsaufbau und eine Polsterung über unregelmäßig geformten Verbindungen.

Brand	3M
Color	Black
Is Discontinued By Manufacturer	No
Item model number	2228-1X10FT
Manufacturer	3M Industrial Market Center
Material	Rubber
National Stock Number	5970-01-349-5326
Number of Items	1
Product Dimensions	1.6 x 3.65 x 3.85 inches; 6.4 Ounces
Size	1x10FT

5 Star

4 Star

3 Star

2 Star

1 Star

Schreiben Sie eine Bewertung

Ihre E-Mail wird nicht veröffentlicht. Alle Pflichtfelder sind mit gekennzeichnet^*

Deine Bewertung

Scritto da: Wyatt

Not only for wiring

I used it to make downtube and chainstay protection on my mountain bike. Works very well, prevents chips and scratches, and looks cool if you line it up right. My only complaint is that it isn’t friction resistant at all. Had some brake housing and wanted to see if the tape could help prevent damage from the rubbing, wore right through the tape. TBH I wasn’t expecting much since it is fairly soft but I wanted to try anyway.

Scritto da: Paul Stuart

Silences your bike!

Bought this to keep the chain slap to a minimum. Put it on my chain stay and added some ridges. Really helped. Has been on more than a year and still looks good and quoted the bike down quite a bit. You can peel it off and clean it with goo gone if you need to.

Scritto da: Jim Piatt

I don't use shrink tubing any more on electrical connections

I almost always solder electrical connections and this stuff makes a waterproof seal and is easier to apply than shrink tubing. It seems to vulcanize to itself when wrapped and is rather hard to get off wiring when that is needed. That's OK, I want something that works well. I use it to also wrap some hose clamps for looks and to avoid chafing. Tons of uses so I carry it in my work truck and fun buggy. I just cut off a small strip, peel off the paper and stretch it before applying. EZ and effective.

Scritto da: BL

Good Top Coating for Wiring

Used this to wrap wiring for a protective coating. This tape sticks and seals very well. It is pretty pricey though and do not go very far. It is a very good product without doubt. Will buy again if have a need for it.

Scritto da: Erick Cruz-Larios

Chainstay protector

Bike was already used so ignore the scratches. Used this as a chainstay on my girlfriend's Marlin 5. It's thick and feels like a peice of rubber. No doubts in my mind that it is sealed well and has great adhesion, also its practically impossible to pull it apart if it adhears to itself, which is what its made to do.

Scritto da: BondGuy

Bike chain guard

A tiny bit thick for this use but it works. Chain won't slap your frame and cause paint chips if you stick this stuff to the impact points. You could make about 15 chain guards for half the price of a single pre-cut one specifically designed for bikes.

Scritto da: G9000

Great for Bike Protection

Bought this to use on my mountain bikes for rock protection and chain guard slap. Works extremely well. Used in on both mountain bikes, and even my road bike. Its been holding up really well. I ride my bikes every day, so if it was gonna fail it would have shown its weakness by now. However so far, it all still looks great! Recommeded it to all my buddies. Much cheaper than buying the dedicated bike protectors!!

Scritto da: C L Smith

Real rubber tape

Don’t settle for off brands. This tape is self sealing, and makes for moisture proof electrical splices. The trick is to stretch it applying and wrapping. You will feel it get very tacky as you are wrapping. Press down all the edges. It makes for a pretty permanent seal. I ‘ve been using this brand tape on all electrical installations in marine applications and never had a failure.

Scritto da: aaron lemieux

Excellent product

Excellent product, works great for sealing wiring harnesses against salt, water and corrosion

Scritto da: Gael Carlier

Excellent quality

Bought this to protect my bike's chainstain and I've also used it to protect the cranks ends. It's very easy to apply and seems ideal for the job. Only put 4*due to the price (£24 for a roll).

Scritto da: Sonsems

Great product!

Very sticky to seal off the electrical joint to prevent moisture and also I used it on my Mtb for chain stay protection.

Scritto da: Noble Wulf

Great for protecting against chainslap on my mountain bike

Great for protecting against chainslap on my mountain bike. Layer it up to make the chain quiet. Only thing is its extremely hard to remove the mastic from the paint. Just mushes around until you can get it all off. This is a MUST for anyone who rides downhill, bike parks ect.

Scritto da: MLM

Its Works!

I am sure it is used for other things but I bought it for use on my bicycles. Sticks well and is thick (one sided only). 3M/Scotch quality. Much easier to order from Amazon that to hunt for in the stores...